Is is normal to have different hashrate for eth and etc? Nvidia gpus. Difference is about 2.5% more when mining ethereum. 4.8c version.
why there is a difference with the same config eth mining and etc 3% difference is nobody understands
Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 302. (Read 784965 times)
January 04, 2020, 01:51:06 AM
why there is a difference with the same config eth mining and etc 3% difference is nobody understands
January 03, 2020, 05:48:57 PM
Is is normal to have different hashrate for eth and etc? Nvidia gpus. Difference is about 2.5% more when mining ethereum. 4.8c version.
why there is a difference with the same config eth mining and etc 3% difference is nobody understands
January 03, 2020, 05:34:34 PM
Hello dev PM why is there not even a new version with a big change 
??
?? January 03, 2020, 05:13:44 PM
Is is normal to have different hashrate for eth and etc? Nvidia gpus. Difference is about 2.5% more when mining ethereum. 4.8c version.
why there is a difference with the same config eth mining and etc 3% difference is nobody understands
January 03, 2020, 03:14:09 PM
Is is normal to have different hashrate for eth and etc? Nvidia gpus. Difference is about 2.5% more when mining ethereum. 4.8c version.
January 03, 2020, 01:40:23 AM
The crash seems completely random, anywhere from 3 to 10 min, most of the time the system will restart and the miner will run from autostart, but sometimes the miner just won't run even after the system restart. There are no error messages, I have checked all log files and everything just seem to be running normal than "CRASH", system restart. My rig was running without a hiccup for weeks on end somewhere before the 4.8 release, now it can't even stay on for more than 10 minute at a time.
The size of DAG allways increase steps by 8Mb every time. And every time when it grows up it's need more vmemory. And you must remember that all equipment wears. PSU, GPU chips, vmemory chips... All these equip can degradate with time cause to 24/7 work on close to 100% using.
Try to raise voltages on GPU's and mvddc a bit and check.
January 02, 2020, 10:41:56 PM
The crash seems completely random, anywhere from 3 to 10 min, most of the time the system will restart and the miner will run from autostart, but sometimes the miner just won't run even after the system restart. There are no error messages, I have checked all log files and everything just seem to be running normal than "CRASH", system restart. My rig was running without a hiccup for weeks on end somewhere before the 4.8 release, now it can't even stay on for more than 10 minute at a time.
January 02, 2020, 02:17:32 AM
I've tried 4.9b now with driver 19.12.3 and it says unknown openCL driver and hangs when mining about 15 seconds (totaly freeze, cut the power is the only solution)
Reverted back to 19.9.2 driver and it minesat about 20 minutes, then hang and reboots itself. About 0,3% better hashrate than 4.7c (cant use 4.8c at all)
No logging.
Hardware:
Motherboard: Asus B250 Mining Expert
CPU: i5 6500
RAM: 8gb
Virual memory: 64gb
Gpu's (in order in miner): RX470,RX470,RX580,RX580,Vii,RX470,RX470,RX470,RX580,RX470
Conf for cards:
-cclock 1240,1240,1250,1250,1830,1240,1240,1240,1220,1240
-mclock 2150,2150,2150,2150,1030,2150,2150,2150,2120,2150
-cvddc 930,890,890,930,970,890,930,900,950,900
-mvddc 935,900,910,930,950,900,930,900,950,900
-clKernel 1
-mi 14
-amd
-acm
-cdm 2
Is it something there that's not compatible with 4.9b?
Edit: over an hour now with 4.9b without issues. 19.9.2 driver, still can't use 19.12.3.
On RX 580 8Gb cards 4.9b works fine with 19.12.3 driver. Reverted back to 19.9.2 driver and it mines
No logging.
Hardware:
Motherboard: Asus B250 Mining Expert
CPU: i5 6500
RAM: 8gb
Virual memory: 64gb
Gpu's (in order in miner): RX470,RX470,RX580,RX580,Vii,RX470,RX470,RX470,RX580,RX470
Conf for cards:
-cclock 1240,1240,1250,1250,1830,1240,1240,1240,1220,1240
-mclock 2150,2150,2150,2150,1030,2150,2150,2150,2120,2150
-cvddc 930,890,890,930,970,890,930,900,950,900
-mvddc 935,900,910,930,950,900,930,900,950,900
-clKernel 1
-mi 14
-amd
-acm
-cdm 2
Edit: over an hour now with 4.9b without issues. 19.9.2 driver, still can't use 19.12.3.
January 01, 2020, 02:07:16 PM
Yes, I tried. Phoenix said that it was a bag with multiGPU system with different overclock settings.
oh okay
did not knew about that
Has anyone addressed this issue? I have AMD 19.12.2 and phoenix 4.9b, random crashes still pop up frequently.
Most people have multi GPU systems with different OC setting for max hash.
Most people have multi GPU systems with different OC setting for max hash.
as with the previous post taken as reference
try downgrading the driver version to the version
it may resolve the issue with no impact on hash rate
January 01, 2020, 10:51:28 AM
Yes, I tried. Phoenix said that it was a bag with multiGPU system with different overclock settings.
Has anyone addressed this issue? I have AMD 19.12.2 and phoenix 4.9b, random crashes still pop up frequently.
Most people have multi GPU systems with different OC setting for max hash.
January 01, 2020, 05:54:03 AM
The new beta version is ready. You can download PhoenixMiner 4.9b from here:
https://mega.nz/#F!2NkkjaxC!OOFiV0uPuPI1YoebTE7hMw (MEGA)
If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):
The new features in this release are:
Please let us know if you have any problems or questions related to PhoenixMiner 4.9b.
https://mega.nz/#F!2NkkjaxC!OOFiV0uPuPI1YoebTE7hMw (MEGA)
If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):
Code:
File: PhoenixMiner_4.9b_Windows.zip
===================================
SHA-1: 4b8f002bfed687938580a60354ee74ba2b9ed97a
SHA-256: 5ab17ce168d2da17ad49e8cd9a0263abdfc5e9412079458026f1dede64fb15c1
SHA-512: 71d9cf2a65d378900bbb616895f4f4cede8da8fa8ae19352491f82e82e27e9e079e7c879789afb833db2b588527f391acc725d74a638f8b91b9356e0d48add8a
File: PhoenixMiner_4.9b_Linux.tar.gz
====================================
SHA-1: d8dd717c554227da8834880b8d9a93b4e589b8b0
SHA-256: e357ed9fc56e13f627d5a576fff7b6c84d0790a7ce85a1ac6dd2022e30dd5c15
SHA-512: 8829b3d65818a016fa42f57e09d22a7aa26cc50e287f28837ea9cde59626f70f3dcdf9b641744053259e12fc6132e98553b092cf80f676cf329996adce3c6b10
File: PhoenixMiner_NVRTC_Windows.zip
====================================
SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4
===================================
SHA-1: 4b8f002bfed687938580a60354ee74ba2b9ed97a
SHA-256: 5ab17ce168d2da17ad49e8cd9a0263abdfc5e9412079458026f1dede64fb15c1
SHA-512: 71d9cf2a65d378900bbb616895f4f4cede8da8fa8ae19352491f82e82e27e9e079e7c879789afb833db2b588527f391acc725d74a638f8b91b9356e0d48add8a
File: PhoenixMiner_4.9b_Linux.tar.gz
====================================
SHA-1: d8dd717c554227da8834880b8d9a93b4e589b8b0
SHA-256: e357ed9fc56e13f627d5a576fff7b6c84d0790a7ce85a1ac6dd2022e30dd5c15
SHA-512: 8829b3d65818a016fa42f57e09d22a7aa26cc50e287f28837ea9cde59626f70f3dcdf9b641744053259e12fc6132e98553b092cf80f676cf329996adce3c6b10
File: PhoenixMiner_NVRTC_Windows.zip
====================================
SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4
The new features in this release are:
- Added support for AMD RX5500 cards
- Added support for the latest AMD Windows drivers 19.12.3
- Fixed the problem with loading NVML library with the latest Nvidia drivers
- Fixed a problem that was introduced in 4.8c causing mismatching of the cards when using more than one value in -cclock or any other command-line argument with more than one value (i.e. when using different values for each card)
- Added an HTML version of the documentation for better navigation and readability
Please let us know if you have any problems or questions related to PhoenixMiner 4.9b.
I've tried 4.9b now with driver 19.12.3 and it says unknown openCL driver and hangs when mining about 15 seconds (totaly freeze, cut the power is the only solution)
Reverted back to 19.9.2 driver and it mines
No logging.
Hardware:
Motherboard: Asus B250 Mining Expert
CPU: i5 6500
RAM: 8gb
Virual memory: 64gb
Gpu's (in order in miner): RX470,RX470,RX580,RX580,Vii,RX470,RX470,RX470,RX580,RX470
Conf for cards:
-cclock 1240,1240,1250,1250,1830,1240,1240,1240,1220,1240
-mclock 2150,2150,2150,2150,1030,2150,2150,2150,2120,2150
-cvddc 930,890,890,930,970,890,930,900,950,900
-mvddc 935,900,910,930,950,900,930,900,950,900
-clKernel 1
-mi 14
-amd
-acm
-cdm 2
Edit: over an hour now with 4.9b without issues. 19.9.2 driver, still can't use 19.12.3.
December 31, 2019, 11:41:38 PM
4.8c didn't work on my AMD rigs, there were constant crashes. I used 4.8b as more stable version. After few hours of checking 4.9b looks good. Frankly, there is no changes in hashrate in comparison with previous versions.
did you try updating the graphics driver to the latest version?
then you may not have constant crashes like you have in 4.8c version
December 31, 2019, 03:38:12 PM
4.8c didn't work on my AMD rigs, there were constant crashes. I used 4.8b as more stable version. After few hours of checking 4.9b looks good. Frankly, there is no changes in hashrate in comparison with previous versions.
did you try updating the graphics driver to the latest version?
then you may not have constant crashes like you have in 4.8c version
December 30, 2019, 04:23:35 PM
4.8c didn't work on my AMD rigs, there were constant crashes. I used 4.8b as more stable version. After few hours of checking 4.9b looks good. Frankly, there is no changes in hashrate in comparison with previous versions.
December 30, 2019, 03:37:07 PM
The new beta version is ready. You can download PhoenixMiner 4.9b from here:
https://mega.nz/#F!2NkkjaxC!OOFiV0uPuPI1YoebTE7hMw (MEGA)
If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):
The new features in this release are:
Please let us know if you have any problems or questions related to PhoenixMiner 4.9b.
https://mega.nz/#F!2NkkjaxC!OOFiV0uPuPI1YoebTE7hMw (MEGA)
If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):
Code:
File: PhoenixMiner_4.9b_Windows.zip
===================================
SHA-1: 4b8f002bfed687938580a60354ee74ba2b9ed97a
SHA-256: 5ab17ce168d2da17ad49e8cd9a0263abdfc5e9412079458026f1dede64fb15c1
SHA-512: 71d9cf2a65d378900bbb616895f4f4cede8da8fa8ae19352491f82e82e27e9e079e7c879789afb833db2b588527f391acc725d74a638f8b91b9356e0d48add8a
File: PhoenixMiner_4.9b_Linux.tar.gz
====================================
SHA-1: d8dd717c554227da8834880b8d9a93b4e589b8b0
SHA-256: e357ed9fc56e13f627d5a576fff7b6c84d0790a7ce85a1ac6dd2022e30dd5c15
SHA-512: 8829b3d65818a016fa42f57e09d22a7aa26cc50e287f28837ea9cde59626f70f3dcdf9b641744053259e12fc6132e98553b092cf80f676cf329996adce3c6b10
File: PhoenixMiner_NVRTC_Windows.zip
====================================
SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4
===================================
SHA-1: 4b8f002bfed687938580a60354ee74ba2b9ed97a
SHA-256: 5ab17ce168d2da17ad49e8cd9a0263abdfc5e9412079458026f1dede64fb15c1
SHA-512: 71d9cf2a65d378900bbb616895f4f4cede8da8fa8ae19352491f82e82e27e9e079e7c879789afb833db2b588527f391acc725d74a638f8b91b9356e0d48add8a
File: PhoenixMiner_4.9b_Linux.tar.gz
====================================
SHA-1: d8dd717c554227da8834880b8d9a93b4e589b8b0
SHA-256: e357ed9fc56e13f627d5a576fff7b6c84d0790a7ce85a1ac6dd2022e30dd5c15
SHA-512: 8829b3d65818a016fa42f57e09d22a7aa26cc50e287f28837ea9cde59626f70f3dcdf9b641744053259e12fc6132e98553b092cf80f676cf329996adce3c6b10
File: PhoenixMiner_NVRTC_Windows.zip
====================================
SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4
The new features in this release are:
- Added support for AMD RX5500 cards
- Added support for the latest AMD Windows drivers 19.12.3
- Fixed the problem with loading NVML library with the latest Nvidia drivers
- Fixed a problem that was introduced in 4.8c causing mismatching of the cards when using more than one value in -cclock or any other command-line argument with more than one value (i.e. when using different values for each card)
- Added an HTML version of the documentation for better navigation and readability
Please let us know if you have any problems or questions related to PhoenixMiner 4.9b.
Didn't fixed a bug
Code:
Eth: Failed to submit hashrate: Exception -32601 : METHOD_NOT_FOUND: The method
being requested is not available on this server: the method eth_submitHashrate d
oes not exist/is not available
being requested is not available on this server: the method eth_submitHashrate d
oes not exist/is not available
Proper name "eth_submitHashRate" now i guess.
December 30, 2019, 09:36:23 AM
Super, works fine.
I get:
It's expected message, because my card don't have such feature,
but is it possible to suppress it? [turn it off] (its annoying to appear constantly)
or to appear one time only while initialization.
I get:
Quote
GPU1: unable to get fan speed - Not Supported (3)
It's expected message, because my card don't have such feature,
but is it possible to suppress it? [turn it off] (its annoying to appear constantly)
or to appear one time only while initialization.
December 30, 2019, 04:17:00 AM
The new beta version is ready. You can download PhoenixMiner 4.9b from here:
(MEGA links are no longer active)
If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):
The new features in this release are:
Please let us know if you have any problems or questions related to PhoenixMiner 4.9b.
(MEGA links are no longer active)
If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows):
Code:
File: PhoenixMiner_4.9b_Windows.zip
===================================
SHA-1: 4b8f002bfed687938580a60354ee74ba2b9ed97a
SHA-256: 5ab17ce168d2da17ad49e8cd9a0263abdfc5e9412079458026f1dede64fb15c1
SHA-512: 71d9cf2a65d378900bbb616895f4f4cede8da8fa8ae19352491f82e82e27e9e079e7c879789afb833db2b588527f391acc725d74a638f8b91b9356e0d48add8a
File: PhoenixMiner_4.9b_Linux.tar.gz
====================================
SHA-1: d8dd717c554227da8834880b8d9a93b4e589b8b0
SHA-256: e357ed9fc56e13f627d5a576fff7b6c84d0790a7ce85a1ac6dd2022e30dd5c15
SHA-512: 8829b3d65818a016fa42f57e09d22a7aa26cc50e287f28837ea9cde59626f70f3dcdf9b641744053259e12fc6132e98553b092cf80f676cf329996adce3c6b10
File: PhoenixMiner_NVRTC_Windows.zip
====================================
SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4
===================================
SHA-1: 4b8f002bfed687938580a60354ee74ba2b9ed97a
SHA-256: 5ab17ce168d2da17ad49e8cd9a0263abdfc5e9412079458026f1dede64fb15c1
SHA-512: 71d9cf2a65d378900bbb616895f4f4cede8da8fa8ae19352491f82e82e27e9e079e7c879789afb833db2b588527f391acc725d74a638f8b91b9356e0d48add8a
File: PhoenixMiner_4.9b_Linux.tar.gz
====================================
SHA-1: d8dd717c554227da8834880b8d9a93b4e589b8b0
SHA-256: e357ed9fc56e13f627d5a576fff7b6c84d0790a7ce85a1ac6dd2022e30dd5c15
SHA-512: 8829b3d65818a016fa42f57e09d22a7aa26cc50e287f28837ea9cde59626f70f3dcdf9b641744053259e12fc6132e98553b092cf80f676cf329996adce3c6b10
File: PhoenixMiner_NVRTC_Windows.zip
====================================
SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4
The new features in this release are:
- Added support for AMD RX5500 cards
- Added support for the latest AMD Windows drivers 19.12.3
- Fixed the problem with loading NVML library with the latest Nvidia drivers
- Fixed a problem that was introduced in 4.8c causing mismatching of the cards when using more than one value in -cclock or any other command-line argument with more than one value (i.e. when using different values for each card)
- Added an HTML version of the documentation for better navigation and readability
Please let us know if you have any problems or questions related to PhoenixMiner 4.9b.
December 29, 2019, 07:04:59 AM
Curious, which country are you from?
In this case I would choose gpus that do not need to change BIOS for good results.
In this case I would choose gpus that do not need to change BIOS for good results.
Im from Israel
No need to flash bios for mining (just if you want to squeeze last 0,x MH from it, in my opinion doesn't worth the risk), also if the card is dead, bios is useless. I don't think they desolder bios for checking it if was flashed or not, also if they do that, you can blame them for flashed intentionately that bios/or hardware modiification especially for voiding warranty. Is your word against they word. I don't know they are accreditate to desolder bios chip or make hardware modification (as seller or service, it they are not official AMD), any hardware modification will void automatically warranty. I think important is to have intact AMD sticker on screew.
flashing bios is not only for 0.xMH, there are many more reasons
and in my case, card was not completely dead, i was working but crashing all the time, so they could check the bios.
it is also my fault for not flashing back to original - i was young and stupid back then LOL
December 29, 2019, 06:35:33 AM
actually they can demonstrate, they checked the bios and see that it was flashed for mining
and also, in this store where i bought they had a little text that say for warranty is for "normal home use" (its actually a bad translation) but you get the point.
and also, in this store where i bought they had a little text that say for warranty is for "normal home use" (its actually a bad translation) but you get the point.
Curious, which country are you from?
In this case I would choose gpus that do not need to change BIOS for good results.
December 29, 2019, 05:58:14 AM
actually they can demonstrate, they checked the bios and see that it was flashed for mining
and also, in this store where i bought they had a little text that say for warranty is for "normal home use" (its actually a bad translation) but you get the point.
anyways, if you dont get them replaced or fixed, i would buy them for parts.
PM me it it will be relevant.
and also, in this store where i bought they had a little text that say for warranty is for "normal home use" (its actually a bad translation) but you get the point.
anyways, if you dont get them replaced or fixed, i would buy them for parts.
PM me it it will be relevant.
Jump to: