PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 301.

PhoenixMiner

full member

Activity: 357

Merit: 101

Quote from: novakain20 on January 08, 2020, 09:41:21 PM

Does anyone have a list of the pools that Pheonix uses for its dev fees? I just switched from Claymore to Pheonix and I have firewall rules that block all egress traffic from mining rigs except to certain sites. Claymore was consistent in its preferred pool, Pheonix seems to be a lot of different ones.

Basically we try to use the same pool for devfee as the pool that you are mining on (if it is one of the top 3-4 ones), otherwise it is ethermine or some of the other big pools.

PhoenixMiner

full member

Activity: 357

Merit: 101

PhoenixMiner 4.9c is officially released. You can find the download link and the checksums in the first post of this thread.

The new features in this release are:

Adding option -rate 2 to use the command name "eth_submitHashRate" instead of "eth_submitHashrate" when solo mining
Adding support for AMD Linux drivers 19.50-967956
Other small fixes and improvements

Here are the other features from 4.9b:

Added support for AMD RX5500 cards
Added support for the latest AMD Windows drivers 19.12.3
Fixed the problem with loading NVML library with the latest Nvidia drivers
Fixed a problem that was introduced in 4.8c causing mismatching of the cards when using more than one value in -cclock or any other command-line argument with more than one value (i.e. when using different values for each card)
Added an HTML version of the documentation for better navigation and readability

About the AMD Linux drivers 19.50-967956:

These drivers fix the hardware control issues from the previous Linux drivers and support RX5500. However, they reintroduce the Navi TLB problem and the hashrates are about 10-14 MH/s, so you are better off with the previous Linux drivers for Navi cards (or use Windows).

novakain20

newbie

Activity: 3

Merit: 0

Does anyone have a list of the pools that Pheonix uses for its dev fees? I just switched from Claymore to Pheonix and I have firewall rules that block all egress traffic from mining rigs except to certain sites. Claymore was consistent in its preferred pool, Pheonix seems to be a lot of different ones.

melpheos

jr. member

Activity: 557

Merit: 5

Quote from: Binary100100 on January 07, 2020, 08:16:33 PM

I'd suggest making sure you're cards were reset to Graphics Mode instead of Compute Mode.
Try adding -acm in your batch file or press "y" in the console.

Tried that, no luck...
This is very strange

alexcrys1

newbie

Activity: 60

Merit: 0

hi, i have this error:
Stratum thread not responsive for 51 s
Thread(s) not responding
Restarting
and miner stay like this is not restarting...

0xcosmos

full member

Activity: 585

Merit: 110

Quote from: ?? on ??

Okay, update for those having issues with mixed nvidia/amd rigs I just discovered this yesterday. Both of my mixed rigs are using the same motherboard (Asrock h110 pro) Additionally both MB's had 2 sticks of 4 GB memory plugged into them, so on a hunch I pulled 1 stick of 4GB Ram out and left them with only 4GB of ram. Not sure WHY this would make them more stable but both have been running fine now for over 24 hrs with no freezing or shutoffs.. If this can help anyone else I hope it does, maybe those MB dont like 2 sticks of RAM I dunno but so far it's seemed to work with 4.9b.

were both of the ram sticks different?
it can be an issue if they are different as it will induce stability issues when they are utilized in high percentage

skinnyfalcon

newbie

Activity: 49

Merit: 0

Quote from: ?? on ??

Okay, update for those having issues with mixed nvidia/amd rigs I just discovered this yesterday. Both of my mixed rigs are using the same motherboard (Asrock h110 pro) Additionally both MB's had 2 sticks of 4 GB memory plugged into them, so on a hunch I pulled 1 stick of 4GB Ram out and left them with only 4GB of ram. Not sure WHY this would make them more stable but both have been running fine now for over 24 hrs with no freezing or shutoffs.. If this can help anyone else I hope it does, maybe those MB dont like 2 sticks of RAM I dunno but so far it's seemed to work with 4.9b.

That is totally bazaar, one would think its the other way around. My rx 580 rig is having random crashes as well, going to check on this.

Binary100100

member

Activity: 180

Merit: 10

I'd suggest making sure you're cards were reset to Graphics Mode instead of Compute Mode.
Try adding -acm in your batch file or press "y" in the console.

melpheos

jr. member

Activity: 557

Merit: 5

I haven't been mining ETC since november (was mining grin) but switched back to ETC yesterday and discovered that my hashrate has dropped by half.
Nothing has changed in my rig since november (same drivers, same miner, same cards obviously)
I was running around 30Mh/s and now i'm running at 15Mh/s...
I have updated my drivers, downgraded them and I have the same results...
Also tried latest PhoenixMiner with no luck.

I haven't update my windows (7)and I have no idea what could be different since november.

If anyone has some idea, i'm taking it (I also have an old image of the windows that I could put back on my SSD)

mazius

jr. member

Activity: 81

Merit: 1

Quote from: sbcandrew on January 07, 2020, 07:48:07 AM

У мeня тoжe paбoтaeт, нo windows 10 peзepвиpyeт чacть видeo пaмять и нe дaёт иcпoльзoвaть вce 4гб, нa эфиpe вcё этo бyдeт paбoтaть дo 352 эпoxи (3.75Гб), мaй - июнь. A в Windows 7 вpoдe тaкoгo нeт, вoт и xoчy пoпpoбoвaть

Этo вcё кocтыли, кoтopыe в cвoe вpeмя лeпили к GTX 1063. И гдe oни ceйчac? Ha дpyгиx нe ocoбo пpoфитныx мoнeтax. Toчнo тaк жe бyдeт и c 4-x гигoвкaми. Или avitocoin, либo olxcoin

kcting

newbie

Activity: 1

Merit: 0

I have same issue with 4.9b and 4.8c few weeks ago Nvidia cards for lower power consumption no longer work for , i either increase core clock or PL again to get the same hashrate.
please fix this issue .

sbcandrew

newbie

Activity: 58

Merit: 0

Quote from: mazius on January 07, 2020, 05:35:08 AM

Quote from: sbcandrew on January 05, 2020, 08:35:11 PM

здpaвcтвyйтe, y кoгo-нибyдь пoлyчилocь зaпycтить PhoenixMiner 4.8c нa Windows 7? Пpи зaпycкe мaйнep вылeтaeт c oшибкoй amdocl64.dll кoд c0000005, в лoгe виднo чтo этo пpoиcxoдит пpи пoпыткe гeнepaции DAG. Bидeoкapтa RX 570. Дpaйвepa пepeпpoбoвaл вce(((

Кaкoй cмыcл иcпoльзoвaть Bин 7?. Ecть pиг нa 5 шт Asus RX474. B Bин 10 paбoтaют чeткo.

У мeня тoжe paбoтaeт, нo windows 10 peзepвиpyeт чacть видeo пaмять и нe дaёт иcпoльзoвaть вce 4гб, нa эфиpe вcё этo бyдeт paбoтaть дo 352 эпoxи (3.75Гб), мaй - июнь. A в Windows 7 вpoдe тaкoгo нeт, вoт и xoчy пoпpoбoвaть

mazius

jr. member

Activity: 81

Merit: 1

Quote from: sbcandrew on January 05, 2020, 08:35:11 PM

здpaвcтвyйтe, y кoгo-нибyдь пoлyчилocь зaпycтить PhoenixMiner 4.8c нa Windows 7? Пpи зaпycкe мaйнep вылeтaeт c oшибкoй amdocl64.dll кoд c0000005, в лoгe виднo чтo этo пpoиcxoдит пpи пoпыткe гeнepaции DAG. Bидeoкapтa RX 570. Дpaйвepa пepeпpoбoвaл вce(((

Кaкoй cмыcл иcпoльзoвaть Bин 7?. Ecть pиг нa 5 шт Asus RX474. B Bин 10 paбoтaют чeткo.

stryker7176

newbie

Activity: 3

Merit: 0

Anyone else suspect the devs of stealing hashes? I'm seeing about a 12% loss when using Phoenixminer vs Claymore. I would suspect a 5% deviation across all miners from what's being reported locally vs what's being reported on the mining server, but 12% with just phoenixminer seems suspicious.

biospb

newbie

Activity: 64

Merit: 0

Hi, PhoenixMiner!
Merry Christmas and Happy new year! Cheesy

It seems that Nvidia kernel optimizations for lower power consumption no longer work for last DAG epochs so it is needed to increase core clock or PL again and again to get the same hashrate.
Please take a look if it can be done again.
btw, 440 series nvidia drivers are greatly optimized in terms of irq/queue performance, producing twice less LA on heavy gpu usage. and new cuda 10.2 also.

Next problem - when mining is resumed after reaching tstop/tstart gpu quite often get stuck after few such cycles. Can resuming be done more smooth from low intensity and step by step increasing to target?
Also intensity can be reduced in advance when getting close to tstop temp.

And what about gt auto-tuning not from 0, but from defined gt values? it will take much less time and be more accurate. so there will be no need to set exact values every time oveclocking is changed for one of gpus.
it can be a problem as auto-tuning runs after each stop/resume cycle and can take longer than reaching tstop temp again)

Thanks in advance!

sbcandrew

newbie

Activity: 58

Merit: 0

Quote from: 0xcosmos on January 06, 2020, 11:57:12 AM

Quote from: sbcandrew on January 06, 2020, 11:26:39 AM

i set 16GB, 32Gb, 48Gb, no result. Computer with 1 card rx570 4gb

ubuntu 18.04
sapphire rx 570 4gb pulse
working just fine
use linux distro or try windows 10 ltsc

I know that they work on Windows 10. The task is to run it on Windows 7, since Windows 10 reserves video memory and does not allow people to use 4GB of memory. -benchmark 352 is the maximum era on which a 4GB graphics card works in Windows 10, and a DAG file is only 3.75Gb

0xcosmos

full member

Activity: 585

Merit: 110

Quote from: sbcandrew on January 06, 2020, 11:26:39 AM

i set 16GB, 32Gb, 48Gb, no result. Computer with 1 card rx570 4gb

ubuntu 18.04
sapphire rx 570 4gb pulse
working just fine
use linux distro or try windows 10 ltsc

sbcandrew

newbie

Activity: 58

Merit: 0

Quote from: ?? on ??

I think 4GB card is almost obsolete for mining because increase of dag, not 100% sure but...

no, dag size eth 3,5gb. These cards work without problems on Windiws 10, but do not want to work on Windows 7. Problem in the program

sbcandrew

newbie

Activity: 58

Merit: 0

Quote from: ?? on ??

Quote from: sbcandrew on January 05, 2020, 08:35:11 PM

Hello, did anyone manage to run PhoenixMiner 4.8c on Windows 7? At startup, the miner crashes with the error amdocl64.dll code c0000005, the log shows that this happens when trying to generate DAG. Video card RX 570. I tried everything drivers(((

Virtual memory, how much?

i set 16GB, 32Gb, 48Gb, no result. Computer with 1 card rx570 4gb

sbcandrew

newbie

Activity: 58

Merit: 0

здpaвcтвyйтe, y кoгo-нибyдь пoлyчилocь зaпycтить PhoenixMiner 4.8c нa Windows 7? Пpи зaпycкe мaйнep вылeтaeт c oшибкoй amdocl64.dll кoд c0000005, в лoгe виднo чтo этo пpoиcxoдит пpи пoпыткe гeнepaции DAG. Bидeoкapтa RX 570. Дpaйвepa пepeпpoбoвaл вce(((

--------------------------

Hello, did anyone manage to run PhoenixMiner 4.8c on Windows 7? At startup, the miner crashes with the error amdocl64.dll code c0000005, the log shows that this happens when trying to generate DAG. Video card RX 570. I tried everything drivers(((

Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 301. (Read 784965 times)