In one of my rigs, I get this problem that Windows get unresposive and slow. Have the error message unable to get fan speed - Unknown Error (999) as somebody reported before.
Tried lowered mem with no sucess and cards seems work in my test PC at 1000+ in mem OC.
Combo of GTX 1660 TI and RTX 2070.
Any ideas? Rig is working fine with other algos.
Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 337. (Read 784965 times)
May 27, 2019, 01:23:19 PM
May 27, 2019, 11:49:31 AM
Hello, lately I have really low average hashrate.
Ethermine pool, reported 395 MH/s, 1% of stales but 355 MH/s on average?
I never saw such a difference, why is that? Thank you
Ethermine pool, reported 395 MH/s, 1% of stales but 355 MH/s on average?
I never saw such a difference, why is that? Thank you
May 27, 2019, 02:46:38 AM
-- Added new Nvidia kernels v3 with slightly higher hashrate and lower power consumption (up to about 1-1.5% less power). The new kernels are supported only on GTX1050/1060/1070/1080/Ti GPUs and are enabled by default on these GPUs. Note that you can't use these kernels for dual-mining, only -nvkernel 2 works for dual mining on Nvidia.
My p106 gpu's are using Kernel v3 on phoenix 4.2c but there is no hashrate rising or lower power consumption ?Do i do something special for hash rising _?
My batch is typical like :
PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal walletid.Rigid
Any advice ?
My p106 gpu's are using Kernel v3 on phoenix 4.2c but there is no hashrate rising or lower power consumption ?Do i do something special for hash rising _?
My batch is typical like :
PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal walletid.Rigid
Any advice ?
add -nvkernel 3 to your batch file, then you should see slightly improved hashrate/lowered power consumption
May 26, 2019, 02:21:28 PM
-- Added new Nvidia kernels v3 with slightly higher hashrate and lower power consumption (up to about 1-1.5% less power). The new kernels are supported only on GTX1050/1060/1070/1080/Ti GPUs and are enabled by default on these GPUs. Note that you can't use these kernels for dual-mining, only -nvkernel 2 works for dual mining on Nvidia.
My p106 gpu's are using Kernel v3 on phoenix 4.2c but there is no hashrate rising or lower power consumption ?Do i do something special for hash rising _?
My batch is typical like :
PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal walletid.Rigid
Any advice ?
Decrease your power limit by 1% and you will see no drop or very little drop in the performance. If it doesn't drop try reducing it with 1% more. Choose your best performance / power ratio between -1% and -2% power limit decrease. My p106 gpu's are using Kernel v3 on phoenix 4.2c but there is no hashrate rising or lower power consumption ?Do i do something special for hash rising _?
My batch is typical like :
PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal walletid.Rigid
Any advice ?
May 26, 2019, 01:07:54 PM
-- Added new Nvidia kernels v3 with slightly higher hashrate and lower power consumption (up to about 1-1.5% less power). The new kernels are supported only on GTX1050/1060/1070/1080/Ti GPUs and are enabled by default on these GPUs. Note that you can't use these kernels for dual-mining, only -nvkernel 2 works for dual mining on Nvidia.
My p106 gpu's are using Kernel v3 on phoenix 4.2c but there is no hashrate rising or lower power consumption ?Do i do something special for hash rising _?
My batch is typical like :
PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal walletid.Rigid
Any advice ?
My p106 gpu's are using Kernel v3 on phoenix 4.2c but there is no hashrate rising or lower power consumption ?Do i do something special for hash rising _?
My batch is typical like :
PhoenixMiner.exe -pool eu1-etc.ethermine.org:4444 -wal walletid.Rigid
Any advice ?
May 25, 2019, 07:01:07 AM
What are the optimal -gwtime values for solo mining?
May 23, 2019, 07:16:59 AM
Phoenix, please, update miner for latest 19.5.x AMD drivers support! I forced to use Claymore cause of it...
May 23, 2019, 06:34:22 AM
is anyone mining with the last AMD driver using PhoenixMiner 4.2c?
if not, what is the last supported
tnx
Read 2 post up. 4.2c full supports driver up to 19.4.3if not, what is the last supported
tnx
o sorry, I was on my mobile and passed through it
May 23, 2019, 06:07:33 AM
AMD Best version works with nofee is phoenixminer 3.5 with nodevfee https://mirrorace.com/m/2SD23
May 23, 2019, 05:22:27 AM
is anyone mining with the last AMD driver using PhoenixMiner 4.2c?
if not, what is the last supported
tnx
Read 2 post up. 4.2c full supports driver up to 19.4.3 if not, what is the last supported
tnx
May 23, 2019, 04:26:54 AM
is anyone mining with the last AMD driver using PhoenixMiner 4.2c?
if not, what is the last supported
tnx
if not, what is the last supported
tnx
May 23, 2019, 02:31:38 AM
using hiveos running with the latest hive OS
anyone has encountered these error
phoenixminer exited, waiting to cooldown a bit
Had the same issue. It's related to wrong miner config.anyone has encountered these error
phoenixminer exited, waiting to cooldown a bit
Here is mine:
https://i.postimg.cc/HLssN5Fy/Greenshot-2019-05-23-09-28-58.png
May 22, 2019, 06:11:55 AM
Version 4.2c have full support AMD drivers up to 19.4.3.
Miner need update to support OpenCL from 19.5.1 driver.
Miner need update to support OpenCL from 19.5.1 driver.
Same here...
May 22, 2019, 12:43:04 AM
Altcoinlog about Phoenix miner
The official website and instructions for setting up the Phoenix Miner. Comparison of TOP 3 programs for mining and expert conclusion. How to start mining ETH and possible installation problems.
The article is written in Russian.
https://altcoinlog.com/download-phoenix-miner/
The official website and instructions for setting up the Phoenix Miner. Comparison of TOP 3 programs for mining and expert conclusion. How to start mining ETH and possible installation problems.
The article is written in Russian.
https://altcoinlog.com/download-phoenix-miner/
May 21, 2019, 06:47:16 AM
Hehe ... seems to be silence here ... no response from the OP ... Really weird . 
May 19, 2019, 04:57:29 PM
This is usually caused by nvidia driver bug, try using low intensity dag loading or reduce your memclk( usually the pill crashes it, not the miner ).
Switching briefly from P2 to P0 is not a driver bug, that's how the P-states work on nvidia. There's a workaround on Windows, but Linux has no such settings. I'll try to check the GPU clocks when a dag is being switched to see whether my suspicions are correct.All ethash miners experience the same issue, except Claymore.
Edit - looks like my suspicions are correct:
Code:
#Date Time gpu pwr temp sm mem enc dec mclk pclk
#YYYYMMDD HH:MM:SS Idx W C % % % % MHz MHz
20190519 14:27:01 0 159 67 100 100 0 0 5613 1531
20190519 14:27:02 0 159 67 100 100 0 0 5613 1531
20190519 14:27:03 0 159 67 100 100 0 0 5613 1531
20190519 14:27:04 0 159 67 100 100 0 0 5613 1531
20190519 14:27:05 0 159 67 100 100 0 0 5613 1531
20190519 14:27:06 0 159 67 100 100 0 0 5613 1531
20190519 14:27:07 0 160 67 100 100 0 0 5613 1531
20190519 14:27:08 0 63 66 0 0 0 0 5613 1544
20190519 14:27:09 0 69 65 3 0 0 0 6106 1556
20190519 14:27:10 0 < this is where it crashed
This is while the DAG switches to another one. Note the mclk column.
May 19, 2019, 04:41:09 PM
Hello phoenix devs, i will use -proto 4(nicehash) mining mode but this mod not using mining.hashrate method, please add this mode to program. Thank you.
May 19, 2019, 01:41:19 PM
using hiveos running with the latest hive OS
anyone has encountered these error
phoenixminer exited, waiting to cooldown a bit
using p106 cards
i cant seem to run the hiveos on phoenixminer
thanks
anyone has encountered these error
phoenixminer exited, waiting to cooldown a bit
using p106 cards
i cant seem to run the hiveos on phoenixminer
thanks
May 19, 2019, 05:55:39 AM
This is usually caused by nvidia driver bug, try using low intensity dag loading or reduce your memclk( usually the pill crashes it, not the miner ).
Switching briefly from P2 to P0 is not a driver bug, that's how the P-states work on nvidia. There's a workaround on Windows, but Linux has no such settings. I'll try to check the GPU clocks when a dag is being switched to see whether my suspicions are correct.All ethash miners experience the same issue, except Claymore.
Edit - looks like my suspicions are correct:
Code:
#Date Time gpu pwr temp sm mem enc dec mclk pclk
#YYYYMMDD HH:MM:SS Idx W C % % % % MHz MHz
20190519 14:27:01 0 159 67 100 100 0 0 5613 1531
20190519 14:27:02 0 159 67 100 100 0 0 5613 1531
20190519 14:27:03 0 159 67 100 100 0 0 5613 1531
20190519 14:27:04 0 159 67 100 100 0 0 5613 1531
20190519 14:27:05 0 159 67 100 100 0 0 5613 1531
20190519 14:27:06 0 159 67 100 100 0 0 5613 1531
20190519 14:27:07 0 160 67 100 100 0 0 5613 1531
20190519 14:27:08 0 63 66 0 0 0 0 5613 1544
20190519 14:27:09 0 69 65 3 0 0 0 6106 1556
20190519 14:27:10 0 < this is where it crashed
This is while the DAG switches to another one. Note the mclk column.
May 18, 2019, 11:16:05 AM
Can't really search the thread, so I'll report a bug here. On NVIDIA rigs, the main display card (GPU0) crashes during DAG switch - this usually happens on 1080 and 1080 Ti. The main reason seems to be that the cards briefly go from loaded P2 to unloaded P0 during the switch, which brings them to unstable memory clocks.
This is usually caused by nvidia driver bug, try using low intensity dag loading or reduce your memclk( usually the pill crashes it, not the miner ). Jump to: