Topic: PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux) - page 468. (Read 784985 times)
February 23, 2018, 05:03:51 AM
used, good compare claymore, like it
February 23, 2018, 04:35:33 AM
@nitrobg I also have onboard card enabled.
I used both bat samples, same. Its overclocking, use fans, but no undervolt...
What would be the problem ? Latest OverdriveNTool 2.5 and Adrenalin Edition 18.2.2
https://imgur.com/a/BzT4Z
I used both bat samples, same. Its overclocking, use fans, but no undervolt...
What would be the problem ? Latest OverdriveNTool 2.5 and Adrenalin Edition 18.2.2
https://imgur.com/a/BzT4Z
February 23, 2018, 03:05:21 AM
I want undervolt for RX cards to work, like Claymore does, to be 100% happy with PhoenixMiner. Now I am 90% because can't undervolt.
@PhoenixMiner do you consider adding undervolt for rx cards in the next version ?
You know that OverdriveNTool does a perfect job at overclocking, right?
I am interested in undervolting, not overclocking. I tried OverdriveNTool with RX 580 and blockchain driver or latest AMD driver 18.2.2 ... OverdriveNTool can overclock but cannot undervolt, no matter I tried and can't find why.
February 22, 2018, 11:51:21 PM
Quote
yup etc, still an issue ...
I usually have that issue when I mistype my command line or copy and paste is messed up. Have you tried to remove all REM in setx?
February 22, 2018, 11:15:27 PM
Quote
yup etc, still an issue ...
I usually have that issue when I mistype my command line or copy and paste is messed up. Have you tried to remove all REM in setx?
February 22, 2018, 10:50:57 PM
hi dev
gtx 1060 3g can miner etc or eth? that no load dag
gtx 1060 3g can miner etc or eth? that no load dag
February 22, 2018, 10:20:19 PM
Hello, have an issue. When i press start, it appears then disappears (nothing happen). see picture.. tested with 6x rx570 8G nitro+
https://uphinhnhanh.com/image/sxhQZF
https://uphinhnhanh.com/image/sxhQZF
You most likely missing the pause command in the end of the batchfile
Just write pause in the last line of your batch.
it ok when i tested with another rig, but 1 rig 6x rx570 8G nitro get issue. Plz help me ...
It looks like you're mining ETC, if that's the case, remove -proto 3 and -cdm 2 and try again. Let us know
February 22, 2018, 10:11:02 PM
Hello, have an issue. When i press start, it appears then disappears (nothing happen). see picture.. tested with 6x rx570 8G nitro+
https://uphinhnhanh.com/image/sxhQZF
https://uphinhnhanh.com/image/sxhQZF
You most likely missing the pause command in the end of the batchfile
Just write pause in the last line of your batch.
it ok when i tested with another rig, but 1 rig 6x rx570 8G nitro get issue. Plz help me ...
It looks like you're mining ETC, if that's the case, remove -proto 3 and -cdm 2 and try again. Let us know
February 22, 2018, 09:49:51 PM
Hello, have an issue. When i press start, it appears then disappears (nothing happen). see picture.. tested with 6x rx570 8G nitro+
https://uphinhnhanh.com/image/sxhQZF
https://uphinhnhanh.com/image/sxhQZF
You most likely missing the pause command in the end of the batchfile
Just write pause in the last line of your batch.
it ok when i tested with another rig, but 1 rig 6x rx570 8G nitro get issue. Plz help me ...
February 22, 2018, 07:30:26 PM
Before using phoenix I was mining ETH my claymore (10.6 and above) on the same PC with 2 RX570 (bios mod + mem OC + undervolt). With claymore 11.0 I switched back from phoenix (then 2.5D), after 24Hs non stop minimum everytime. Then phoenix 2.6.
So on my computer, phoenix 2.6 is by a confortable margin faster than claymore 11.0.
I have removed claymore from my PC, I won't switch again.
I agree that PhoenixMiner is faster.
I have watched it for a while now and I know it's faster than Claymore. I don't have any issues with Phoenix
and my rig. I just want to make that test for my own peace of mind that it gets to the actual money faster than
the competition. Getting the payouts is the only thing that matters, along with stability.
February 22, 2018, 07:24:02 PM
I am interested in undervolting, not overclocking. I tried OverdriveNTool with RX 580 and blockchain driver or latest AMD driver 18.2.2 ... OverdriveNTool can overclock but cannot undervolt, no matter I tried and can't find why.
I find that odd. I have used OverdriveNTool for a while now and I both Over clock and under volt both GPU and Memory.
I don't know what versions there are for OverdriveNTool but maybe they once had a version that didn't under volt. Not sure.
I'd check to see if you have a current version. Otherwise it will work.
February 22, 2018, 04:21:56 PM
Been running 2.6 for a while but now a 1060 6gb card of mine is consistently giving me "incorrect eth share." I switch to 2.7a, didn't help. I've turned the card back to stock, 100% power +0 core +0 mem, still incorrect shares, I've swapped the card to a different PCI slot, no change. I tried claymore and the card will mine fine and not get incorrect shares.
you have too much overclock...
February 22, 2018, 12:37:51 PM
Been running 2.6 for a while but now a 1060 6gb card of mine is consistently giving me "incorrect eth share." I switch to 2.7a, didn't help. I've turned the card back to stock, 100% power +0 core +0 mem, still incorrect shares, I've swapped the card to a different PCI slot, no change. I tried claymore and the card will mine fine and not get incorrect shares.
February 22, 2018, 12:09:08 PM
To better mine ETH you need both, overclocking your memory because ETH requires a lot of bandwith, and undervolting your GPU to reduce your power consumption.
Use MSI afterburner.
Use MSI afterburner.
February 22, 2018, 11:50:32 AM
I want undervolt for RX cards to work, like Claymore does, to be 100% happy with PhoenixMiner. Now I am 90% because can't undervolt.
@PhoenixMiner do you consider adding undervolt for rx cards in the next version ?
You know that OverdriveNTool does a perfect job at overclocking, right?
I am interested in undervolting, not overclocking. I tried OverdriveNTool with RX 580 and blockchain driver or latest AMD driver 18.2.2 ... OverdriveNTool can overclock but cannot undervolt, no matter I tried and can't find why.
February 22, 2018, 07:38:40 AM
I would like to ask if anyone is experiencing a larger percentage of stale shares lately? My effective hashrate has dropped and stale shares at around 7%. I'm on ethermine pool mining ETH only.
My setup:
12 pcs of Sapphire Nitro+ RX570 8GB with custom memshift BIOS
GPU Clock at 1150MHz 800mV
Memory Clock at 2190MHz 850mV
PhoenixMiner 2.7a
My setup:
12 pcs of Sapphire Nitro+ RX570 8GB with custom memshift BIOS
GPU Clock at 1150MHz 800mV
Memory Clock at 2190MHz 850mV
PhoenixMiner 2.7a
February 22, 2018, 07:27:18 AM
There are a lot of different opinions on which miner is fastest. No doubt we all want to know.
IMO, there is really only one way to solve this riddle for each person’s mining rigs.
Due to differences in rigs, internet speed, clocks and voltages that will drift, board types, difficulties that change at
random and many other things that we have no control over, this can't be done in a few hours accurately.
Here is the test I believe will help us solve this issue.
I plan doing this same test starting after my next payout.
Maybe if many of us do this we can compare notes.
After your next payout start PhoenixMiner, let it run without changes until your next payout.
Record the hours/minutes it took to get your payout.
Change to the next miner you want to compare against. Probably Claymore as that seems to be the
competition. Do the same, wait until you get your next payout. Record that time.
Faster miner to the payout wins.
Remember you can’t change anything during these tests.
This could take anywhere between 2 to 10 days for each test depending on your setup.
It’s time consuming but it will reveal what miner is getting you to the money in the shortest
amount of time. Anything else is not getting us a firm answer.
Suggestions?
IMO, there is really only one way to solve this riddle for each person’s mining rigs.
Due to differences in rigs, internet speed, clocks and voltages that will drift, board types, difficulties that change at
random and many other things that we have no control over, this can't be done in a few hours accurately.
Here is the test I believe will help us solve this issue.
I plan doing this same test starting after my next payout.
Maybe if many of us do this we can compare notes.
After your next payout start PhoenixMiner, let it run without changes until your next payout.
Record the hours/minutes it took to get your payout.
Change to the next miner you want to compare against. Probably Claymore as that seems to be the
competition. Do the same, wait until you get your next payout. Record that time.
Faster miner to the payout wins.
Remember you can’t change anything during these tests.
This could take anywhere between 2 to 10 days for each test depending on your setup.
It’s time consuming but it will reveal what miner is getting you to the money in the shortest
amount of time. Anything else is not getting us a firm answer.
Suggestions?
Before using phoenix I was mining ETH my claymore (10.6 and above) on the same PC with 2 RX570 (bios mod + mem OC + undervolt). With claymore 11.0 I switched back from phoenix (then 2.5D), after 24Hs non stop minimum everytime. Then phoenix 2.6.
So on my computer, phoenix 2.6 is by a confortable margin faster than claymore 11.0.
I have removed claymore from my PC, I won't switch again.
February 22, 2018, 06:11:15 AM
Hello, have an issue. When i press start, it appears then disappears (nothing happen). see picture.. tested with 6x rx570 8G nitro+
https://uphinhnhanh.com/image/sxhQZF
https://uphinhnhanh.com/image/sxhQZF
You most likely missing the pause command in the end of the batchfile
Just write pause in the last line of your batch.
https://uphinhnhanh.com/images/2018/02/22/17723c.jpg
February 22, 2018, 06:00:23 AM
Hello, have an issue. When i press start, it appears then disappears (nothing happen). see picture.. tested with 6x rx570 8G nitro+
https://uphinhnhanh.com/image/sxhQZF
https://uphinhnhanh.com/image/sxhQZF
You most likely missing the pause command in the end of the batchfile
Just write pause in the last line of your batch.
February 22, 2018, 05:04:04 AM
Hello, have an issue. When i press start, it appears then disappears (nothing happen). see picture.. tested with 6x rx570 8G nitro+
https://uphinhnhanh.com/image/sxhQZF
https://uphinhnhanh.com/image/sxhQZF
Jump to: