Author

Topic: [POOL][Scrypt][Scrypt-N][X11] Profit switching pool - wafflepool.com - page 113. (Read 465769 times)

hero member
Activity: 630
Merit: 500
Just a FYI from MP about Auroracoin:

Pool Hash Rate   1,173.437 Mh/s
Pool Efficiency (10 minute)   97.78%
Avg. Profit (last 30 blocks)   0.01692879 BTC/MH/day
Avg. Luck (last 30 blocks)   330.62%
Block Stale Rate (4h/24h)   0.00%/25.11%
Current Users Mining   381
Current Block   5,783
Current Difficulty   279.59
Total AUR Paid   11,990
Last Block Found   5,783
Avg. Time To Find Block   0 Hours 17 Minutes
Time Since Last Block   0 Hours 5 Minutes
Current Round Shares   29146944*
Current Round Luck   62.86%

From coinedup:

Order Book (AUR/BTC)
(last: 0.00349650) (mov: 0.00448663)

An interesting read here: http://rt.com/op-edge/iceland-auroracoin-financial-crisis-825/

I have changed quotas and now mining 10% on AUR, waffle still remaining at 30%.

@poolwaffle, once again I am asking should the pool jump on AUR?

Just noticed the payouts have halved, now 12.5/block.  Value of AUR should be on the rise on the markets. Glad I am holding some coins Smiley

Nice!

Block #   Confirms   Amount   Profit (BTC/MH/day)   Luck   Time
5,804   5   12.5   0.00183564   44%   Mar 29 9:58 AM
5,792   17   12.5   0.00136416   30%   Mar 29 9:20 AM
5,783   Done   12.5   0.0038006   78%   Mar 29 8:26 AM
5,778   Done   12.5   0.0132886   263%   Mar 29 8:04 AM
5,777   Done   12.5   0.00242419   48%   Mar 29 7:57 AM
5,771   Done   12.5   0.00497167   101%   Mar 29 7:20 AM
5,769   Done   12.5   0.0585511   1,188%   Mar 29 7:01 AM
5,768   Done   12.5   0.00973262   197%   Mar 29 6:59 AM
5,764   Done   12.5   0.0237714   490%   Mar 29 6:49 AM
5,762   Done   12.5   0.00317901   65%   Mar 29 6:45 AM
5,750   Done   12.5   0.00507232   99%   Mar 29 6:15 AM
5,747   Done   12.5   0.126031   2,399%   Mar 29 6:13 AM
member
Activity: 112
Merit: 10
Well for the record, my hosted GridSpeed never gets affected by the DDOS or HiJack..

 Flame On

hero member
Activity: 630
Merit: 500
thnx Smiley  found the line to add to config  >>    "no-client-reconnect" : true,      

but is that all i need to do? there was a lot of other code- not in the config file- listed on the information pages for the patch.  Do i need to do something elsewhere than the config file also?



edit-- ohhhh. no, I am running cgminer 3.7.2.  well, lol, it runs with the extra line, so I'll leave it till I have time to figure the next one out.  thanks for the input.

-s

Kalroth's miner is a fork of 3.7.2 and will show you version 3.7.3 as it starts up (if you have 20140324 version correctly installed or have recompiled for you linux users).  As stated in earlier posts it will have no effect on prior versions and the config line will be ignored without any warning as far as I know.
newbie
Activity: 10
Merit: 0
Mother F'r! Last time I go out of town the ddos hits waffle but my rig failed over all the way to my 3rd failsafe. About an hour or so ago I hop on my phone to check on a rig and it isnt connected to the waffle anymore... Or any of my pools for that matter. Looks like someone elses wallets getting plumped up with my coinage  Angry WTF Now I cant get back to make any changes til tomorrow. Super bummed. Poor waffle needs a lucky rabbits foot right about meow...Me too lol
newbie
Activity: 21
Merit: 0
thnx Smiley  found the line to add to config  >>    "no-client-reconnect" : true,      

but is that all i need to do? there was a lot of other code- not in the config file- listed on the information pages for the patch.  Do i need to do something elsewhere than the config file also?

Did you download kalroths edition?  That no client wont work on normal cgminer from what i understand


newbie
Activity: 5
Merit: 0
thnx Smiley  found the line to add to config  >>    "no-client-reconnect" : true,      

but is that all i need to do? there was a lot of other code- not in the config file- listed on the information pages for the patch.  Do i need to do something elsewhere than the config file also?



edit-- ohhhh. no, I am running cgminer 3.7.2.  well, lol, it runs with the extra line, so I'll leave it till I have time to figure the next one out.  thanks for the input.

-s
newbie
Activity: 21
Merit: 0
Bydand, back about page 17?(172 i think) There was a link to kalroths version for the update with no reconnect...i am on my phone so cant link to it.
hero member
Activity: 630
Merit: 500
My old GPU's are 280x and 7950 both have 3G.  Will these be sufficient as N increases over time and will I have to be re-tuning cards every time N goes up?

Depends on the coin you're mining.  If you set it up to allocate 2680 MB or so (just guessing what it might be), you'll be good at lookup-gap = 2 until N=12.  You'll have to fiddle with LG at that point.  Anytime N changes though you want to fiddle with your settings - it's not always obvious what the best settings will be.  Sometimes running a lower lookup gap and limiting the intensity (using --rawintensity) gives better performance than going with a higher LG and using all the shaders.

For YACoin at N=14, My R7 250 GB card started at 1.6 KH/sec using the OLD yacminer.  After I updated the software and figured out how to configure it properly, I found settings that gave me 2.5 KH/sec.  I ran with that for a month before experimenting with lowering the LG by 1 and limiting the shaders.  I got an extra 8% hashrate by doing this.  I will eventually be releasing a spreadsheet or web application for y'all to put your settings into to get the same kinds of results, but it won't be until the algorithms are integrated into YACMiner.  I still have one performance metric to come up with a formula for, but I've got quite a bit of data for it now.



I had 4G in mining box for a while and I noticed the 7950 would occasionally start at 700+ KHs mining scrypt but my box kept crashing (memtest discovered bad stick of  system ram) .  What is a reasonable hashrate for 7950?  Now that I am only 2G sysram I have to restart miner multiple times to get 559 KHs average (and it will remain at this average for long time [days]) , it only gets an average 500KHs on some starts and remains there.  Any thoughts on why this can be consistently occuring? I just restart miner and it stabilizes at 559 again.  I have not changed anything in my config (other than quota percentages) for a month or so and wonder if that time it was getting 700+ was a fluke or what or is there some relation to amount of ram.  As I had to remove defective stick of sysram could this have had such a dramatic effect, I am only running single channel single stick of ram for now till I upgrade to 8G for the move to scrypt-n.

I could pull the 8G from my day-to-day normal usage box and try that and see what happens boosting miner to 8G, but my motto "Don't F with it if it if it's not broken".  I will get some ram on order as soon as I can afford it.

Anyone care to donate 8G DDR2-800 (4 sticks of 2G) that they are not using? LOL.
PM me if you can make a good deal Smiley I have over 17M MOON that I have mined and am holding atm. Holding some other alt-coins as well.  Let me know what your choice to cryptocurrency is and I will look to see what I have ...
newbie
Activity: 5
Merit: 0
K. i'm brand new and don't know how to do the kalroth patch to cgminer.

I have searched it and don't understand the explanations. The only thing I have ever adjusted on cgminer is the config file, so baby steps- or even a link to babysteps- would be much appreciated.

thanks much

this is what I found: https://gist.github.com/gevans/9846423
newbie
Activity: 21
Merit: 0
Question on hashing power...


My wafflepool stat shows 2.5-2.68Mh/s while my cgminer shows 505khs, at 6 cards it should be 3.0+.

I have noticed it seems to drop depending upon the coin, is this normal, my miner has the patched kalroth with the noclient reconnect.

Should i expect to see hash power drop depending upon the coins?
hero member
Activity: 700
Merit: 500
Is it me or is waffle pool not profitable?

Hashrate stats: http://waffles.wilschrader.com/stats?address=18vyt72nwrgYPJMTSJ92ppv1DA6G4putv1

Time to 0.01 BTC: Between 20-24 hours according to above site. Is this what you guys are getting too?
That looks like exactly what the profitability would be for your hashrate.  2.24MH/s is not very much on SCRYPT anymore.

Look at the stats page - WafflePool has been hovering around 0.0045BTC/MH/day lately. 

For you, that would be 2.24MH*0.0045BTC/MH/day = ~0.0135BTC/day (So, .01BTC is something like 20-24 hours).

Still more profitable then electricity for me. For many, GPU mining might not be worth it right now.  For example, I have very cheap power, and 1/3 of mining income goes to power right now.  Many areas pay 3 times as much for power.  I will leave that math to you, heh.
newbie
Activity: 7
Merit: 0
Is it me or is waffle pool not profitable?

Hashrate stats: http://waffles.wilschrader.com/stats?address=18vyt72nwrgYPJMTSJ92ppv1DA6G4putv1

Time to 0.01 BTC: Between 20-24 hours according to above site. Is this what you guys are getting too?
hero member
Activity: 630
Merit: 500
Read the thread from where I pointed to ... Nobody has a DEFINITIVE answer as to how the exploit  is accomplished yet.  The Kalroth patch seems to have defeated it ... however as I said miners running older versions MAY be vulnerable as this could happen again ... so far so good for me Smiley  The DDOS attack occured after the exploit was discovered.  My thoughts: someone here was watching thread and changed attack vector when the exploit was investigated.

Edit: the DDOS occured shortly after client.reconnect was disabled ... As mentioned before, the "Anonymous" group of activist hackers could be involved in this.  Read the wiki on "Anonymous hacker group" and form your own conclusions.

Edit: From one of the pools I am (and mentioned here this pool):

 [Update] In the past couple of days we went through several DDoS attacks. In the process our security team had to block extensive list of IPs. This group does not have access to our user database. If by mistake your IP has been blocked, please contact us and we will remedy the situation.
legendary
Activity: 2072
Merit: 1001
What's all this talk of another "attack"?? The only attack I'm aware of was the DDOS a few days ago. And I haven't seen pool waffle mention another attack, unless I've missed it.

Sounds like you conspiracy theorists are claiming someone is stealing your hashing power? I've seen no dropping in hashrate reported by waffle. The Hashrate reported by waffle if still on par with what cgminer reads. And I've been running the same config on waffle for over a month without reconfiguring anything.

If it's a conspiracy it must be a really good one. You can start here:

https://bitcointalksearch.org/topic/m.5853318

There is a new exploit going on redirecting hashpower to rouge servers!
Please see the following starting with this page:
https://bitcointalk.org/index.php?topic=433634.3040

As far as I know anyone mining without the latest Kalroth cgminer patch is still vulnerable.  Veox sgminer has also been patched.

When you say patched you mean a feature was disabled and no one has a clue why it really happened?
sr. member
Activity: 294
Merit: 250
Odd. That doesn't seem to be happening to me since waffle is still reporting the correct hashrate
hero member
Activity: 630
Merit: 500
What's all this talk of another "attack"?? The only attack I'm aware of was the DDOS a few days ago. And I haven't seen pool waffle mention another attack, unless I've missed it.

Sounds like you conspiracy theorists are claiming someone is stealing your hashing power? I've seen no dropping in hashrate reported by waffle. The Hashrate reported by waffle if still on par with what cgminer reads. And I've been running the same config on waffle for over a month without reconfiguring anything.

If it's a conspiracy it must be a really good one. You can start here:

https://bitcointalksearch.org/topic/m.5853318

There is a new exploit going on redirecting hashpower to rouge servers!
Please see the following starting with this page:
https://bitcointalk.org/index.php?topic=433634.3040

As far as I know anyone mining without the latest Kalroth cgminer patch is still vulnerable.  Veox sgminer has also been patched.
legendary
Activity: 3654
Merit: 8909
https://bpip.org
What's all this talk of another "attack"?? The only attack I'm aware of was the DDOS a few days ago. And I haven't seen pool waffle mention another attack, unless I've missed it.

Sounds like you conspiracy theorists are claiming someone is stealing your hashing power? I've seen no dropping in hashrate reported by waffle. The Hashrate reported by waffle if still on par with what cgminer reads. And I've been running the same config on waffle for over a month without reconfiguring anything.

If it's a conspiracy it must be a really good one. You can start here:

https://bitcointalksearch.org/topic/m.5853318
sr. member
Activity: 294
Merit: 250
What's all this talk of another "attack"?? The only attack I'm aware of was the DDOS a few days ago. And I haven't seen pool waffle mention another attack, unless I've missed it.

Sounds like you conspiracy theorists are claiming someone is stealing your hashing power? I've seen no dropping in hashrate reported by waffle. The Hashrate reported by waffle if still on par with what cgminer reads. And I've been running the same config on waffle for over a month without reconfiguring anything.
legendary
Activity: 3654
Merit: 8909
https://bpip.org
Well, they can talk all they want. Maybe Windows needs that much, I don't know. This is BAMT with 4 cards and vertminer:

Mem:   2830160k total,  1320704k used,  1509456k free

PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
20   0  591m  162m  67m S    3  6.0  25:58.63 vertminer


As you can see it's even less than 4GB total, I probably forgot to disable Intel graphics.

Care to share what cards are you using and what hash rate are you able to get?

270X

~215 KH/s for Vertcoin
member
Activity: 93
Merit: 10
Well, they can talk all they want. Maybe Windows needs that much, I don't know. This is BAMT with 4 cards and vertminer:

Mem:   2830160k total,  1320704k used,  1509456k free

PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
20   0  591m  162m  67m S    3  6.0  25:58.63 vertminer


As you can see it's even less than 4GB total, I probably forgot to disable Intel graphics.

Care to share what cards are you using and what hash rate are you able to get?
Jump to: