How to I retrieve X11 stats from tmp_api? "?algo=x11", I'm guessing?
Gotta update my widget again haha.
Topic: [POOL][Scrypt][Scrypt-N][X11] Profit switching pool - wafflepool.com - page 64. (Read 465769 times)
June 06, 2014, 07:28:21 PM
June 06, 2014, 07:15:02 PM
x11mod = 3.7Mhs and no shares + HW errors
darkcoin = 2.2MHs and getting shares
darkcoin = 2.2MHs and getting shares
What kind of GPU(s) are you using? If it's one of 7950/280X/270X/290 I can give you some settings to try with x11mod that work for me.
June 06, 2014, 06:54:52 PM
PW when I look at the my stats on my ipad the Bitcoin Earnings and the X11 at the top in the header do not show everything else looks fine though. On a PC everything looks fine so I am not sure if you are pushing a different Mobile version or if these just haven't been added being beta just wanted to give you a heads up.
Its set as a cookie, so you'll have to hit "enable" on each device
@PW
Some X11 coins to consider: LitecoinX and Darkcoin
Some X11 coins to consider: LitecoinX and Darkcoin
Darkcoin has been added, just disabled until we have enough hashrate to actually solve blocks reliably (approx every hour). LitecoinX I'll check out
June 06, 2014, 06:22:34 PM
@PW
Some X11 coins to consider: LitecoinX and Darkcoin
Some X11 coins to consider: LitecoinX and Darkcoin
June 06, 2014, 05:39:16 PM
@PW
I have d=0.008 set in config but pool keeps changing to 0.160
[16:30:46] Network diff set to 358
[16:30:46] Stratum from Pool 0 detected new block
[16:32:09] Network diff set to 355
[16:32:09] Stratum from Pool 0 detected new block
[16:33:39] Stratum connection to Pool 0 interrupted
[16:33:40] Pool 0 difficulty changed to 0.160
[16:34:24] Pool 0 difficulty changed to 0.008
[16:34:24] Stratum from Pool 0 requested work restart
[16:34:24] Network diff set to 317
[16:34:24] Stratum from Pool 0 detected new block
[16:35:54] Stratum connection to Pool 0 interrupted
[16:35:55] Pool 0 difficulty changed to 0.160
[16:37:25] Stratum connection to Pool 0 interrupted
[16:37:25] Pool 0 difficulty changed to 0.160
Been running for several hours and have not found a single share (at 3.7MHs)
Edit: AHHH changed from kernel x11mod to kernel darkcoin and got a share almost immediately ...
x11mod = 3.7Mhs and no shares + HW errors
darkcoin = 2.2MHs and getting shares
I have d=0.008 set in config but pool keeps changing to 0.160
[16:30:46] Network diff set to 358
[16:30:46] Stratum from Pool 0 detected new block
[16:32:09] Network diff set to 355
[16:32:09] Stratum from Pool 0 detected new block
[16:33:39] Stratum connection to Pool 0 interrupted
[16:33:40] Pool 0 difficulty changed to 0.160
[16:34:24] Pool 0 difficulty changed to 0.008
[16:34:24] Stratum from Pool 0 requested work restart
[16:34:24] Network diff set to 317
[16:34:24] Stratum from Pool 0 detected new block
[16:35:54] Stratum connection to Pool 0 interrupted
[16:35:55] Pool 0 difficulty changed to 0.160
[16:37:25] Stratum connection to Pool 0 interrupted
[16:37:25] Pool 0 difficulty changed to 0.160
Been running for several hours and have not found a single share (at 3.7MHs)
Edit: AHHH changed from kernel x11mod to kernel darkcoin and got a share almost immediately ...
x11mod = 3.7Mhs and no shares + HW errors
darkcoin = 2.2MHs and getting shares
June 06, 2014, 05:31:04 PM
PW when I look at the my stats on my ipad the Bitcoin Earnings and the X11 at the top in the header do not show everything else looks fine though. On a PC everything looks fine so I am not sure if you are pushing a different Mobile version or if these just haven't been added being beta just wanted to give you a heads up.
June 06, 2014, 04:22:16 PM
@PW
with D=0.160 about how often should I be finding a share on X11 (Have not found any in 20 minutes). My hashrate is about 2.0 MHs.
with D=0.160 about how often should I be finding a share on X11 (Have not found any in 20 minutes). My hashrate is about 2.0 MHs.
Thats probably 10x what you should be at
Switch to either 0.008 or 0.016 (probably better).
Can you post a table on the X11 Beta page similar to the one on the FAQ page? I think it would help people set their own difficulty.
June 06, 2014, 03:22:05 PM
@PW
with D=0.160 about how often should I be finding a share on X11 (Have not found any in 20 minutes). My hashrate is about 2.0 MHs.
with D=0.160 about how often should I be finding a share on X11 (Have not found any in 20 minutes). My hashrate is about 2.0 MHs.
Thats probably 10x what you should be at
Switch to either 0.008 or 0.016 (probably better).
June 06, 2014, 03:19:20 PM
@PW
with D=0.160 about how often should I be finding a share on X11 (Have not found any in 20 minutes). My hashrate is about 2.0 MHs.
with D=0.160 about how often should I be finding a share on X11 (Have not found any in 20 minutes). My hashrate is about 2.0 MHs.
June 06, 2014, 12:44:37 PM
hey waffle any plans to add x11/x13 multipools
and multi algo switch
and multi algo switch
You're kidding right?
no man not kiddin
Literally, every single one of the 10+ (I stopped counting at 10) of the posts immediately before yours, and almost every post of my "recent history" all mention the new X11 pool in some way. I honestly don't know what to tell you. I don't mean to be a dick, but I'm going to stop answering posts that have such blatently obvious answers if someone would take the time to read posts. I don't mean like "you didn't read through the last 15 pages, the answer is in there", I mean "anywhere in the last page, literally any post". That's just being rediculously lazy, and expecting others to spoon-feed you.
For now, everythings fine for me on X11
@poolwaffle Do you store all the algo payout in one place, or are they all separate ?
I have 0.00015449 for scrypt-n & 0.00151591 for X11. Will you pay me both algo in one ? ^^
@poolwaffle Do you store all the algo payout in one place, or are they all separate ?
I have 0.00015449 for scrypt-n & 0.00151591 for X11. Will you pay me both algo in one ? ^^
Currently payouts are run 100% separately. So, if you had 0.004 in one, and 0.001 in another, you wouldn't be paid on the normal schedule (neither of them meets 0.005 minimum), however you would be paid on Sunday. This will change as soon as we have all the algorithms in and working (another week?) But for now, having them 100% separated means that if anything goes wrong (doesn't look like it will, but I like to be extra cautious), means I can see exactly what went wrong, instead of adding a layer of "uhhh, is this Scrypt, or X11, or what, and how much of each?"
June 06, 2014, 12:15:55 PM
Whats happened to the X11 stats?
hmmm i see now June 06, 2014, 12:09:34 PM
hey waffle any plans to add x11/x13 multipools
and multi algo switch
and multi algo switch
You're kidding right?
no man not kiddin
It's probably not a good idea to post this link here since you seem to have a reading issue
... don't blame me if you hurt yourself: http://wafflepool.com/newalgos June 06, 2014, 11:57:35 AM
hey waffle any plans to add x11/x13 multipools
and multi algo switch
and multi algo switch
You're kidding right?
no man not kiddin
June 06, 2014, 11:48:19 AM
For now, everythings fine for me on X11
@poolwaffle Do you store all the algo payout in one place, or are they all separate ?
I have 0.00015449 for scrypt-n & 0.00151591 for X11. Will you pay me both algo in one ? ^^
@poolwaffle Do you store all the algo payout in one place, or are they all separate ?
I have 0.00015449 for scrypt-n & 0.00151591 for X11. Will you pay me both algo in one ? ^^
June 06, 2014, 11:46:34 AM
Whats happened to the X11 stats?
June 06, 2014, 11:45:01 AM
is x11/x13 pool already yet?
June 06, 2014, 11:40:58 AM
hey waffle any plans to add x11/x13 multipools
and multi algo switch
and multi algo switch
You're kidding right?
June 06, 2014, 11:39:48 AM
hey waffle any plans to add x11/x13 multipools
and multi algo switch
and multi algo switch
June 05, 2014, 07:27:55 PM
Just compiled the sph-sgminer-x11mod on my linux rigs and pointed a bunch of GPUs over to x11. Everything seems to be running smoothly here initially. Thanks a ton for doing this poolwaffle.
June 05, 2014, 07:17:01 PM
Quote
You seem to be using "sgminer 5.0", which I couldn't get to work either. Seems a bit rushed and not production quality to say the least. I'd suggest to try this: https://bitcointalksearch.org/topic/annx11x13-x11-darkcoinx13-marucoin-miner-based-on-sph-sgminer-623409
You'll need to use kernel "x11mod", and "pool-" options are not available in this version. Otherwise it worked fine as a drop-in replacement for all sorts of old miners on BAMT and Windows.
You'll need to use kernel "x11mod", and "pool-" options are not available in this version. Otherwise it worked fine as a drop-in replacement for all sorts of old miners on BAMT and Windows.
Correct, will try the one you linked to.
Jump to: