[POR]⚡ELECTRONEUM⚡Official Moderated Thread - page 352.

wacko

legendary

Activity: 1106

Merit: 1014

Quote from: SunStruck on November 24, 2017, 12:12:09 AM

Moved to suprnova to mine etn , no issues there but 1% pool fee.

Buying signatum from profits for straks swap Cheesy

I tried mining ETN on suprnova a few days ago and got quite a lot less coins than I was supposed to with my hashrate. For some reason their "luck" was very bad (although they've had more hashrate than some other pools I've been to). I've just checked their stats and they're at 185.62% over the expected number of shares for the past 24 hours. Are you getting as many ETN as you should with them?

SunStruck

sr. member

Activity: 676

Merit: 250

Moved to suprnova to mine etn , no issues there but 1% pool fee.

Buying signatum from profits for straks swap Cheesy

wacko

legendary

Activity: 1106

Merit: 1014

Quote from: Equalizer1970 on November 23, 2017, 09:34:02 PM

Hey guys. I downloaded the ETN paperwallet and it has a weird three line public address. Is this three different addresses or just one very long QR code?

When I try to withdraw from Cryptopia it asks for a payment id? What's that? Very confusing.

"Public wallet" is your address. It's on 3 lines because that's just how they formatted that PDF. You should copy all 3 lines and make it into 1 line. Payment IDs, afaik, are for exchanges. So if you're withdrawing from Cryptopia to some other exchange then it's very likely that your wallet address on the other exchange will consist of "address + payment id". Just like it is the case with your Cryptopia ETN wallet. But if you're withdrawing to your local/paper wallet then you don't need to enter the payment id (cause you don't have any, that's why that line is optional).

Equalizer1970

hero member

Activity: 623

Merit: 500

Fortune favours the bold!

Hey guys. I downloaded the ETN paperwallet and it has a weird three line public address. Is this three different addresses or just one very long QR code?

When I try to withdraw from Cryptopia it asks for a payment id? What's that? Very confusing.

tperalta82

full member

Activity: 174

Merit: 100

Electromine is having issues at the moment

Throw me your hashes hahaha

tperalta82

full member

Activity: 174

Merit: 100

Quote from: qwep1 on November 23, 2017, 05:44:44 PM

Quote from: tperalta82 on November 23, 2017, 12:03:06 PM

Miners, try to mine here:

https://etn.multipools.club/

We know we haven't found a block yet, but hey, even my rigs are there waiting.

The only pool where I agreed the number of coins on the calculator Wink

Didn't get it lolol is there anything wrong?

qwep1

hero member

Activity: 610

Merit: 500

Quote from: tperalta82 on November 23, 2017, 12:03:06 PM

Miners, try to mine here:

https://etn.multipools.club/

We know we haven't found a block yet, but hey, even my rigs are there waiting.

The only pool where I agreed the number of coins on the calculator Wink

tperalta82

full member

Activity: 174

Merit: 100

Quote from: pengvisor on November 23, 2017, 03:59:22 PM

I'm going to test out your pool mate for few days. That hashparty is killing me. Their page is not working 50% of the time.

Thanks, we have a very low hashrate, but I hope that will change in the future

AUSTROhash

newbie

Activity: 12

Merit: 0

Dear miner,

I am also disappointed with the uptimes of the website of various Electroneum pools.

That's why I put a dual Xeon blade into my Bladecenter and want to build a ETN pool on it.
Massive Power, 64GB Ram and SSDs for speed are available. 100MBit/s sync is the line.

I would also like to make it available for everyone if you are interested in an AUSTRIA POOL - in VIENNA!

Please leave a comment, because if I open it would be nice to have a large amount of miners to immediately mine the blocks.

Thank you and happy mining

Mario

www.austrohash.at

pengvisor

newbie

Activity: 45

Merit: 0

I'm going to test out your pool mate for few days. That hashparty is killing me. Their page is not working 50% of the time.

BY_ATOM

full member

Activity: 406

Merit: 107

Quote from: TentallyMooN on November 23, 2017, 06:07:36 AM

Quote from: amktt on November 23, 2017, 04:25:08 AM

man I hope the ICO coin will be distributed by second weeks of December... I have waited enough of this delay Undecided

We are all waiting for distribution here dude.Team are making all possible as I see.Hope they will list coin on such biggest exchanges as Bittrex.

As I understand you) but I would not jump to trade on the exchanges at first. I think it will be a strong recession and then growth!

Krakatoa87

member

Activity: 113

Merit: 10

Akroma.ovh | Ether1.ovh EU/US/ASIA Mining Pools

Quote from: wacko on November 23, 2017, 11:07:33 AM

All the large pools are hit and miss. I've tried mining on hashparty pools for a week or so (both the uk and us pools), it was fine for the most part, but there were at least two periods when they just went down for hours (miners were showing something like "socket error. connection refused", front end was not loading). I guess it's either ddos or weak servers (I think they did upgrade to more powerful machines at some point). I stopped mining there and went to a smaller pool. Right now it's been two days since I'm mining on http://electroneum.ovh/ and so far so good. Their hashrate is smaller though and sometimes it takes a while to find a block.

Thank you for your confidence in my pool!

It is still a small pool indeed but it is constantly growing and although there is some periods when it takes time to find a block (blockchain play with my nerves, like today, 7h with no block, then 3 in 40min Shocked

), many users told me that they earn at least as much as on other pools (and sometimes a bit more) on a few day basis.

And I'm proud to say that it have a 99.99% uptime, the only down times were when I had to make update on servers or modify config and it resulted on a 30s~1min disconnection for users. And small pools can also be DDOS attacked, I had 2 DDOS attack already but Ihave a good protection on my servers and it was totally transparent from a user point of view. Wink

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: tbearhere on November 23, 2017, 11:58:44 AM

Quote from: Mattthev on November 23, 2017, 11:03:14 AM

Quote from: tbearhere on November 23, 2017, 10:58:18 AM

What is it with the community pool? Front end down. http://us-etn-stats.hashparty.io/
Ddos?

Hashparty is down most of the time :/ Cheesy

Yup....they must be having a hashparty. Cheesy

They might having party but not with hash Sad

tperalta82

full member

Activity: 174

Merit: 100

Miners, try to mine here:

https://etn.multipools.club/

We know we haven't found a block yet, but hey, even my rigs are there waiting.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: Mattthev on November 23, 2017, 11:03:14 AM

Quote from: tbearhere on November 23, 2017, 10:58:18 AM

What is it with the community pool? Front end down. http://us-etn-stats.hashparty.io/
Ddos?

Hashparty is down most of the time :/ Cheesy

Yup....they must be having a hashparty. Cheesy

wacko

legendary

Activity: 1106

Merit: 1014

Quote from: davey76 on November 23, 2017, 10:05:54 AM

Here: https://blockexplorer.electroneum.com/ ?

Thanks. Right now it shows the longest stuck transaction as 24 min. Mine went through at last, although it took almost two hours for some reason. The fee was standard, suggested by the wallet.

Quote from: tbearhere on November 23, 2017, 10:58:18 AM

What is it with the community pool? Front end down. http://us-etn-stats.hashparty.io/
Ddos?

All the large pools are hit and miss. I've tried mining on hashparty pools for a week or so (both the uk and us pools), it was fine for the most part, but there were at least two periods when they just went down for hours (miners were showing something like "socket error. connection refused", front end was not loading). I guess it's either ddos or weak servers (I think they did upgrade to more powerful machines at some point). I stopped mining there and went to a smaller pool. Right now it's been two days since I'm mining on http://electroneum.ovh/ and so far so good. Their hashrate is smaller though and sometimes it takes a while to find a block.

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: tbearhere on November 23, 2017, 10:58:18 AM

What is it with the community pool? Front end down. http://us-etn-stats.hashparty.io/
Ddos?

Hashparty is down most of the time :/ Cheesy

tbearhere

legendary

Activity: 3164

Merit: 1003

What is it with the community pool? Front end down. http://us-etn-stats.hashparty.io/
Ddos?

davey76

full member

Activity: 508

Merit: 101

Quote from: wacko on November 23, 2017, 09:36:25 AM

Hi. Is there a way to see how many transactions are currently stuck in the mempool? All my previous TXs used to go out almost immediately, but the last one out of the local wallet to an exchange wallet stuck in "pending out" and it's been like this for more than an hour (the wallet said there was 2 blocks backlog, but it's been ~ 40 blocks since then). Should I just wait more, or do I go the "flush_txpool" route? If I do flush, will there be any issues when I try to re-send it?

Here: https://blockexplorer.electroneum.com/ ?

wacko

legendary

Activity: 1106

Merit: 1014

Hi. Is there a way to see how many transactions are currently stuck in the mempool? All my previous TXs used to go out almost immediately, but the last one out of the local wallet to an exchange wallet stuck in "pending out" and it's been like this for more than an hour (the wallet said there was 2 blocks backlog, but it's been ~ 40 blocks since then). Should I just wait more, or do I go the "flush_txpool" route? If I do flush, will there be any issues when I try to re-send it?

Topic: [POR]⚡ELECTRONEUM⚡Official Moderated Thread - page 352. (Read 240343 times)