Pages:
Author

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 20. (Read 104895 times)

full member
Activity: 125
Merit: 100
Hi Marto,

Thanks for your reply as well.

It didn't work, I added the pool address etc, but when I press start the miner hangs *not responding* and can't do anything.

It works fine with btc guild, so guess I will stick to it instead.
hero member
Activity: 728
Merit: 500
NO it will add new settings
Next time you'll have longer drop menu
full member
Activity: 125
Merit: 100
I haven't tried that yet, but won't that remove the setting I already have there?

I want to keep the settings for the other pools as well you see, coz next step will be connect a backup pool in case main pool goes down.

Sorry I am noob regarding this Hexminer, I'm ok with GPUs but this I am learning still.
member
Activity: 86
Merit: 10
I wonder if someone can help me out.

I am trying to mine ppc with my miner, so I edited my Hexminer.ini added the details for the pool exactly same way there is there already btc guild and eligious, from where I have been mining pretty well, anyway after all details inserted I make save close ini start miner and my details are not there. So I open my hexminer.ini and the details I saver aren't there either Huh

Obviously I am doing something wrong, but what I haven't got a clue. Could someone point me in the right direction please?

Have you tried to write it directly in hexminer? If you close hexminer settings will save automaticly.
full member
Activity: 125
Merit: 100
I wonder if someone can help me out.

I am trying to mine ppc with my miner, so I edited my Hexminer.ini added the details for the pool exactly same way there is there already btc guild and eligious, from where I have been mining pretty well, anyway after all details inserted I make save close ini start miner and my details are not there. So I open my hexminer.ini and the details I saver aren't there either Huh

Obviously I am doing something wrong, but what I haven't got a clue. Could someone point me in the right direction please?
hero member
Activity: 728
Merit: 500
hello please I need to know how to install my 1 x 40 GH / s Full set Technobit HEX16B 16 Bitfury chip based bitcoin please miner.ayuda
windows or linux
if Windows
http://www.youtube.com/watch?v=l9SgoVm16Sw
hero member
Activity: 728
Merit: 500
I asked for a refund for the router I ordered but had not been shiped.



Order no CNMUQTEUH
asked on the 21/1/14 and 22/1/14 both on the technobit site and via pm here.

Guess what

NO COMUNICATION AT ALL.

Please cancel my order and refund me my BTC as I have requested.
please signed msg with paypal address
as paypal refund is available @ the moment
newbie
Activity: 42
Merit: 0
hello please I need to know how to install my 1 x 40 GH / s Full set Technobit HEX16B 16 Bitfury chip based bitcoin please miner.ayuda
member
Activity: 92
Merit: 10
I asked for a refund for the router I ordered but had not been shiped.



Order no CNMUQTEUH
asked on the 21/1/14 and 22/1/14 both on the technobit site and via pm here.

Guess what

NO COMUNICATION AT ALL.

Please cancel my order and refund me my BTC as I have requested.
sr. member
Activity: 406
Merit: 250
cats love crypto | 911 truth @checktheevidence.com
date of the payment

I have paid 581€ for order BJJNEKBIM by bank wire on 30-12-3013 from account number NL89RABO0368044971.

Will you include a replacement for the broken HEX16a2 from order WVEFURYEA? I will gladly ship the broken miner back to you if you provide a shipping address.
legendary
Activity: 1190
Merit: 1000
i configured 1000mV when then HEX16A2 went down to 5GH/s, at the moment i configured 1100mv and it did not happen again yet. Maybe it the lower voltage could make it unstable!?

Bye
Michael


Hmm, i had been playing with various setting but never had similar problem.
At least your miner already stable right now  Smiley
newbie
Activity: 36
Merit: 0
i configured 1000mV when then HEX16A2 went down to 5GH/s, at the moment i configured 1100mv and it did not happen again yet. Maybe it the lower voltage could make it unstable!?

Bye
Michael
legendary
Activity: 1190
Merit: 1000
What other software and hardware are you using to mine ataa coins?

Most of us dont't mine alt coins. Because it isn't worth.
But if want to mine with p2pool i think its the best choice to use linux an cgminer 3.10 with patch from technobit.

Hmmmm... Going to try this weekend with Rasp PI Wink
Tks

That's better  Cheesy
sr. member
Activity: 966
Merit: 250
What other software and hardware are you using to mine ataa coins?

Most of us dont't mine alt coins. Because it isn't worth.
But if want to mine with p2pool i think its the best choice to use linux an cgminer 3.10 with patch from technobit.

Hmmmm... Going to try this weekend with Rasp PI Wink
Tks
member
Activity: 86
Merit: 10
What other software and hardware are you using to mine ataa coins?

Most of us dont't mine alt coins. Because it isn't worth.
But if want to mine with p2pool i think its the best choice to use linux an cgminer 3.10 with patch from technobit.
legendary
Activity: 1610
Merit: 1000
I cant get connection to p2pool.org for Zetazoin mining...

This is my error.



*Edit: Using Windows 7 Pro 32
What other software and hardware are you using to mine ataa coins?
sr. member
Activity: 966
Merit: 250
I cant get connection to p2pool.org for Zetazoin mining...

This is my error.



*Edit: Using Windows 7 Pro 32
legendary
Activity: 1610
Merit: 1000
180% means not what you think Smiley

humans us command free
 otherwise read what it exactly means Cheesy

Yeah, but seeing 180% everyday make me worried  Cheesy
There may be worse Grin
In general with technoit image almost 50% of the ram stays free.
legendary
Activity: 1190
Merit: 1000
180% means not what you think Smiley

humans us command free
 otherwise read what it exactly means Cheesy

Yeah, but seeing 180% everyday make me worried  Cheesy
legendary
Activity: 1610
Merit: 1000
Can anyone confirm I can run ~20 or so boards with the TP-Link MR3020, with two 10port powered USB2 hubs on piggyback ?

Thanks.

I am not sure about this since i don't had that many board. But i am more prefer to buy another TL-ML3020 since the price is very cheap.

With 2 HEX16A & 1 HEX16C, my TL-ML3020 memory usage already at 156%. Add 2 nanofury memory usage reach 180%.


I don't think memory might be an issue. I've got 7 HEX16A2 running and doesn't seem like it's hampering performance.

I'd still limit it to 10 per router though. To be on the safe side.

Yes, but i just don't like pushing the router that hard. That why my 2 nanofury moved to tablet now.
180% means not what you think Smiley

humans us command free
 otherwise read what it exactly means Cheesy
Pages:
Jump to: