Nothing can be seen in provided urls what you need to check if all chips are hashing chip nonces count should be equal +-20 is ok from chip to chip
I think all is good with chips change the hub but first try one board only without a hub
Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 23. (Read 104884 times)
Cgminer API is not active. I dont have any API client to check this. When u know any, please link to download.
Here is the thins:
http://users.atw.hu/ifa/rpi/dmesg.txt
http://users.atw.hu/ifa/rpi/lsusb.txt
In Ssh type cgminer-API devsHere is the thins:
http://users.atw.hu/ifa/rpi/dmesg.txt
http://users.atw.hu/ifa/rpi/lsusb.txt
Then cgminer-API stats and post it here please
All commands are lower cased
There are three more issues with your setup which can impact performance
1. Disable blacklist cdc-acm driver
2. Buy mtt hub the one you are having is not. You can follow my and Zich posts about such hubs
3. Try three boards first single psu wth common ground for the pi hub and boards
1. why?1. Disable blacklist cdc-acm driver
2. Buy mtt hub the one you are having is not. You can follow my and Zich posts about such hubs
3. Try three boards first single psu wth common ground for the pi hub and boards
2. i have this: http://www.konigelectronic.com/de_de/1004452 i brought this 2 days ago
3. ok i would try it tomorrow.
Cgminer API is not active. I dont have any API client to check this. When u know any, please link to download.
Here is the thins:
http://users.atw.hu/ifa/rpi/dmesg.txt
http://users.atw.hu/ifa/rpi/lsusb.txt
In Ssh type cgminer-API devsHere is the thins:
http://users.atw.hu/ifa/rpi/dmesg.txt
http://users.atw.hu/ifa/rpi/lsusb.txt
Then cgminer-API stats and post it here please
All commands are lower cased
I have raspbian OS and not tplink-openwrt. I dont have any cgminer-api program.
There are three more issues with your setup which can impact performance
1. Disable blacklist cdc-acm driver
2. Buy mtt hub the one you are having is not. You can follow my and Zich posts about such hubs
3. Try three boards first single psu wth common ground for the pi hub and boards
1. Disable blacklist cdc-acm driver
2. Buy mtt hub the one you are having is not. You can follow my and Zich posts about such hubs
3. Try three boards first single psu wth common ground for the pi hub and boards
Cgminer API is not active. I dont have any API client to check this. When u know any, please link to download.
Here is the thins:
http://users.atw.hu/ifa/rpi/dmesg.txt
http://users.atw.hu/ifa/rpi/lsusb.txt
In Ssh type cgminer-API devsHere is the thins:
http://users.atw.hu/ifa/rpi/dmesg.txt
http://users.atw.hu/ifa/rpi/lsusb.txt
Then cgminer-API stats and post it here please
All commands are lower cased
Cgminer API is not active. I dont have any API client to check this. When u know any, please link to download.
Here is the things:
http://users.atw.hu/ifa/rpi/dmesg.txt
http://users.atw.hu/ifa/rpi/lsusb.txt
http://users.atw.hu/ifa/rpi/lowp.png
Here is the things:
http://users.atw.hu/ifa/rpi/dmesg.txt
http://users.atw.hu/ifa/rpi/lsusb.txt
http://users.atw.hu/ifa/rpi/lowp.png
Oh sorry, on the image is all connected, but today i have one unplugged. There is only 5 board connected to the RPI. When i plug the sixth works too. RPI can handle much more boards.
Chimner API output?
Oh sorry, on the image is all connected, but today i have one unplugged. There is only 5 board connected to the RPI. When i plug the sixth works too. RPI can handle much more boards.
That has very low performance.. :/
Cgminer-API stats
Cgminer-API debs
No caps pls
?
Lsusb -v
Dmesg also
http://users.atw.hu/ifa/DSC_0056.jpg
http://users.atw.hu/ifa/Screenshot_2014-01-19-14-19-15.png
That has very low performance.. :/
You have six miners, but cgminer only shows five. Something is wrong. http://users.atw.hu/ifa/Screenshot_2014-01-19-14-19-15.png
That has very low performance.. :/
My guess is, that a raspberry pi can only handle up to three hex16a2 or ~1200 WU/m
I have 4 hex16a2 on one raspberry pi and similiar GH/s.
That has very low performance.. :/
Super,
Try latest version no more dupes on hex16c
and high CPU usage because of the nanos, but you will be fine just do not pay attention to it I can guarantee 5% performance increase for nanosWow 5% is great, going to try it tomorrow
...
Most probably because of the USB hub. Is it a tt one?
Lsusb -v?
Most probably because of the USB hub. Is it a tt one?
Lsusb -v?
Indeed the problem from usb hub
You are really great loshia I just buy another cheap usb hub that use FE2.1 mtt chip AXP807
I ask them about the chip before buy it
Work great on TPLINK TL-MR3020
Try latest version no more dupes on hex16c
and high CPU usage because of the nanos, but you will be fine just do not pay attention to it I can guarantee 5% performance increase for nanos ...
Most probably because of the USB hub. Is it a tt one?
Lsusb -v?
Most probably because of the USB hub. Is it a tt one?
Lsusb -v?
Indeed the problem from usb hub
You are really great loshia I just buy another cheap usb hub that use FE2.1 mtt chip AXP807
I ask them about the chip before buy it
Work great on TPLINK TL-MR3020
..................
Lack of steady 12V to the board explains why it was disappearing BUT there is a bug which submits dup shares which is fixed and under testing. So watch technobit site for updates dup shares were caused because of voltage problems
Lack of steady 12V to the board explains why it was disappearing BUT there is a bug which submits dup shares which is fixed and under testing. So watch technobit site for updates
dup shares were caused because of voltage problems New patch for cgminer 3.10.0 + openwrt image v 0.1.7 Download
..................
Lack of steady 12V to the board explains why it was disappearing BUT there is a bug which submits dup shares which is fixed and under testing. So watch technobit site for updates dup shares were caused because of voltage problems
Lack of steady 12V to the board explains why it was disappearing BUT there is a bug which submits dup shares which is fixed and under testing. So watch technobit site for updates
dup shares were caused because of voltage problems New patch for cgminer 3.10.0 + openwrt image v 0.1.7 Download
you should connect the 24pin atx connector and put in a paperclip or a little piece of power cable in the green and black wire like in the picture , i`don`t know if your fan is going to spin i think it will i have corsair cx 750m and when i put in a paperclip in my green and black wire the fan spins without even connecting any device to the psu..
http://s8.postimg.org/z174nra3l/download.jpg
so do this:
disconnect the psu from the wall socket
connect 24 pin atx
put paperclip in green and black wire
put some electrical tape on top of the paperclip (24 pin connector)
make shure every thing is connected to the HEXc
power on psu
happy hashing
http://s8.postimg.org/z174nra3l/download.jpg
so do this:
disconnect the psu from the wall socket
connect 24 pin atx
put paperclip in green and black wire
put some electrical tape on top of the paperclip (24 pin connector)
make shure every thing is connected to the HEXc
power on psu
happy hashing
This fixed my problem after hourrrssss of trying!!!!!!!!!!!
you should connect the 24pin atx connector and put in a paperclip or a little piece of power cable in the green and black wire like in the picture , i`don`t know if your fan is going to spin i think it will i have corsair cx 750m and when i put in a paperclip in my green and black wire the fan spins without even connecting any device to the psu..
so do this:
disconnect the psu from the wall socket
connect 24 pin atx
put paperclip in green and black wire
put some electrical tape on top of the paperclip (24 pin connector)
make shure every thing is connected to the HEXc
power on psu
happy hashing
so do this:
disconnect the psu from the wall socket
connect 24 pin atx
put paperclip in green and black wire
put some electrical tape on top of the paperclip (24 pin connector)
make shure every thing is connected to the HEXc
power on psu
happy hashing
This fixed my problem after hourrrssss of trying!!!!!!!!!!!
Jump to: