Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 21.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: awgilyas on January 23, 2014, 08:09:46 AM

Quote from: Zich on January 22, 2014, 08:49:00 PM

Quote from: sgrunger on January 22, 2014, 07:57:36 PM

Can anyone confirm I can run ~20 or so boards with the TP-Link MR3020, with two 10port powered USB2 hubs on piggyback ?

Thanks.

I am not sure about this since i don't had that many board. But i am more prefer to buy another TL-ML3020 since the price is very cheap.

With 2 HEX16A & 1 HEX16C, my TL-ML3020 memory usage already at 156%. Add 2 nanofury memory usage reach 180%.

I don't think memory might be an issue. I've got 7 HEX16A2 running and doesn't seem like it's hampering performance.

I'd still limit it to 10 per router though. To be on the safe side.

Yes, but i just don't like pushing the router that hard. That why my 2 nanofury moved to tablet now.

awgilyas

full member

Activity: 147

Merit: 100

Quote from: Zich on January 22, 2014, 08:49:00 PM

Quote from: sgrunger on January 22, 2014, 07:57:36 PM

Can anyone confirm I can run ~20 or so boards with the TP-Link MR3020, with two 10port powered USB2 hubs on piggyback ?

Thanks.

I am not sure about this since i don't had that many board. But i am more prefer to buy another TL-ML3020 since the price is very cheap.

With 2 HEX16A & 1 HEX16C, my TL-ML3020 memory usage already at 156%. Add 2 nanofury memory usage reach 180%.

I don't think memory might be an issue. I've got 7 HEX16A2 running and doesn't seem like it's hampering performance.

I'd still limit it to 10 per router though. To be on the safe side.

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: Zich on January 22, 2014, 08:49:00 PM

Quote from: sgrunger on January 22, 2014, 07:57:36 PM

Can anyone confirm I can run ~20 or so boards with the TP-Link MR3020, with two 10port powered USB2 hubs on piggyback ?

Thanks.

I am not sure about this since i don't had that many board. But i am more prefer to buy another TL-ML3020 since the price is very cheap.

With 2 HEX16A & 1 HEX16C, my TL-ML3020 memory usage already at 156%. Add 2 nanofury memory usage reach 180%.

Two tplinks common ground and the hub I am posting about all the times;)
If you want them over clocked go for three tplinks because of common ground I think 1250w psu will die with 10 Over clocked boards Wink

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: sgrunger on January 22, 2014, 07:57:36 PM

Can anyone confirm I can run ~20 or so boards with the TP-Link MR3020, with two 10port powered USB2 hubs on piggyback ?

Thanks.

I am not sure about this since i don't had that many board. But i am more prefer to buy another TL-ML3020 since the price is very cheap.

With 2 HEX16A & 1 HEX16C, my TL-ML3020 memory usage already at 156%. Add 2 nanofury memory usage reach 180%.

sgrunger

full member

Activity: 122

Merit: 100

Can anyone confirm I can run ~20 or so boards with the TP-Link MR3020, with two 10port powered USB2 hubs on piggyback ?

Thanks.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: Leahcim on January 22, 2014, 04:44:19 AM

Quote from: Zich on January 22, 2014, 03:45:21 AM

Quote from: Leahcim on January 22, 2014, 03:35:45 AM

Quote from: iFA88 on January 21, 2014, 06:03:11 PM

Same error here but one from six board. Helps only when i shut down the psu. Other five board work well with 20gh.

Quote from: Leahcim on January 21, 2014, 11:10:40 AM

Hi,

my HEX16A2, which was delivered on thursday, went down from about 20HG/s to 5HG/s last night. It did that for the third time. I have a powered USB HUB and a 600W power supply, that is only for this miner. Restart of cgminer does not help, when i turn off the 12v and then turn it on again, the miner goes back to normal work. Is there a command to reset the miner hardware?

Bye
Michael

No Idea on that one?

You can test the problem board without usb hub to see the behavior. Did the powered usb hub use same power source as the miner?
What is your usb hub brand? Some of us encounter problem with usb hub that use stt chip.

It had the same problem without hub, direct connected to the pi, that was why i added the hub.

Hmm, let me test with my pi later.

Result:

I had been test HEX16C on pi whole night. It work well except for chip 0 nonce problem i guess since hash rate decrease from 23 GH/s to 20 Gh/s.
You need to test the board on other host, PC maybe just to make sure the board status.

Leahcim

newbie

Activity: 36

Merit: 0

Quote from: Zich on January 22, 2014, 03:45:21 AM

Quote from: Leahcim on January 22, 2014, 03:35:45 AM

Quote from: iFA88 on January 21, 2014, 06:03:11 PM

Same error here but one from six board. Helps only when i shut down the psu. Other five board work well with 20gh.

Quote from: Leahcim on January 21, 2014, 11:10:40 AM

Hi,

my HEX16A2, which was delivered on thursday, went down from about 20HG/s to 5HG/s last night. It did that for the third time. I have a powered USB HUB and a 600W power supply, that is only for this miner. Restart of cgminer does not help, when i turn off the 12v and then turn it on again, the miner goes back to normal work. Is there a command to reset the miner hardware?

Bye
Michael

No Idea on that one?

You can test the problem board without usb hub to see the behavior. Did the powered usb hub use same power source as the miner?
What is your usb hub brand? Some of us encounter problem with usb hub that use stt chip.

It had the same problem without hub, direct connected to the pi, that was why i added the hub.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: Leahcim on January 22, 2014, 03:35:45 AM

Quote from: iFA88 on January 21, 2014, 06:03:11 PM

Same error here but one from six board. Helps only when i shut down the psu. Other five board work well with 20gh.

Quote from: Leahcim on January 21, 2014, 11:10:40 AM

Hi,

my HEX16A2, which was delivered on thursday, went down from about 20HG/s to 5HG/s last night. It did that for the third time. I have a powered USB HUB and a 600W power supply, that is only for this miner. Restart of cgminer does not help, when i turn off the 12v and then turn it on again, the miner goes back to normal work. Is there a command to reset the miner hardware?

Bye
Michael

No Idea on that one?

You can test the problem board without usb hub to see the behavior. Did the powered usb hub use same power source as the miner?
What is your usb hub brand? Some of us encounter problem with usb hub that use stt chip.

Leahcim

newbie

Activity: 36

Merit: 0

Quote from: iFA88 on January 21, 2014, 06:03:11 PM

Same error here but one from six board. Helps only when i shut down the psu. Other five board work well with 20gh.

Quote from: Leahcim on January 21, 2014, 11:10:40 AM

Hi,

my HEX16A2, which was delivered on thursday, went down from about 20HG/s to 5HG/s last night. It did that for the third time. I have a powered USB HUB and a 600W power supply, that is only for this miner. Restart of cgminer does not help, when i turn off the 12v and then turn it on again, the miner goes back to normal work. Is there a command to reset the miner hardware?

Bye
Michael

No Idea on that one?

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: awgilyas on January 22, 2014, 12:14:07 AM

Derped on the password. Thanks.

Great

awgilyas

full member

Activity: 147

Merit: 100

Derped on the password. Thanks.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: awgilyas on January 21, 2014, 11:56:51 PM

Thanks Zilch.

BTW, is there any way to switch pools?

Tried entering a PPC pool credentials via the web login page. It keeps going back to the backup BTC pool.

If you already put it in pool 1, then maybe there is problem with the pool.
You can see pool status by typing "p" on cgminer window.

awgilyas

full member

Activity: 147

Merit: 100

Thanks Zilch.

BTW, is there any way to switch pools?

Tried entering a PPC pool credentials via the web login page. It keeps going back to the backup BTC pool.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: awgilyas on January 21, 2014, 11:27:32 PM

Quote from: Zich on January 21, 2014, 11:19:24 PM

Quote from: awgilyas on January 21, 2014, 10:30:50 PM

I see. Currently patching and building Cgminer 3.8.3 on Minepeon. Hope it does work.

cgminer 3.8.3 using patch: 7ddb94d6964f2451d2e76f70b069dfdf2b3d4d6f.patch

Got it running.

Finally.

Gratz

awgilyas

full member

Activity: 147

Merit: 100

Quote from: Zich on January 21, 2014, 11:19:24 PM

Quote from: awgilyas on January 21, 2014, 10:30:50 PM

I see. Currently patching and building Cgminer 3.8.3 on Minepeon. Hope it does work.

cgminer 3.8.3 using patch: 7ddb94d6964f2451d2e76f70b069dfdf2b3d4d6f.patch

Got it running.

Finally.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: awgilyas on January 21, 2014, 10:30:50 PM

I see. Currently patching and building Cgminer 3.8.3 on Minepeon. Hope it does work.

cgminer 3.8.3 using patch: 7ddb94d6964f2451d2e76f70b069dfdf2b3d4d6f.patch

awgilyas

full member

Activity: 147

Merit: 100

Quote from: Zich on January 21, 2014, 08:41:37 PM

Quote from: awgilyas on January 21, 2014, 12:04:46 PM

Noob question: I believe I got everything running. flashed the 0.15 firmware on the tp link. and what not, but how do I get my cgminer stats to appear. |

I know it's running via the top command, but the pool is saying that I'm hashing at 1/5th the speed.

Help?

Thanks.

Oh can anyone tell me what flashing green and red light means? Huh

Use ssh(i am using PuTTY) to connect to TL-MR3020. Then type screen -r

Code:

login as: root
[email protected]'s password:

BusyBox v1.19.4 (2013-12-21 07:53:27 EET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r39151)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@Miner01:~# screen -r

I see. Currently patching and building Cgminer 3.8.3 on Minepeon. Hope it does work.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: awgilyas on January 21, 2014, 12:04:46 PM

Noob question: I believe I got everything running. flashed the 0.15 firmware on the tp link. and what not, but how do I get my cgminer stats to appear. |

I know it's running via the top command, but the pool is saying that I'm hashing at 1/5th the speed.

Help?

Thanks.

Oh can anyone tell me what flashing green and red light means? Huh

Use ssh(i am using PuTTY) to connect to TL-MR3020. Then type screen -r

Code:

login as: root
[email protected]'s password:

BusyBox v1.19.4 (2013-12-21 07:53:27 EET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r39151)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@Miner01:~# screen -r

marto74

hero member

Activity: 728

Merit: 500

date of the payment

cannachris

sr. member

Activity: 406

Merit: 250

cats love crypto | 911 truth @checktheevidence.com

Quote from: cannachris on January 15, 2014, 10:34:26 AM

Dear technobit: One of my two hex16a2 miners just stopped working a day ago no lights are lighting up and windows doesn't detect a device anymore when you plug it in. I added a ticket to my new order for a hex16b BJJNEKBIM asking for a replacement. I will gladly also ship the broken miner back to you if you want.

I will let you guys know how they handle this.

I have not yet had any reply so I also added a ticket to my original order no reply either. Please let me know what is going to happen! And I have wired the money for order BJJNEKBIM almost a month ago and it still says "awaiting payment". It is for january shipment so I am getting worried. Please let me know something. My account name @ technobit.eu is Christophe Lelarge.

Marto you are a good person I don't want to burden you but I am getting very stressed because if you haven't received my bank wire I need to know very quickly my bank only allows me 30 days to open a dispute with your bank.

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 21. (Read 104895 times)