Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 25.

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: iFA88 on January 16, 2014, 10:17:02 AM

Quote from: loshia on January 16, 2014, 10:12:07 AM

Quote from: iFA88 on January 16, 2014, 10:07:17 AM

]
On low clock its the same error.

Same as above dude do as i suggest
lsusb sorry i missed it
common ground for everything
cut red wire of usb data cable
change hub

Something is not right in your setup

and pls post top output so we can see cpu usage
So without external pi power? only usb to the hub? With wifi disabled?

So, u say i should remove the powering from USB hub to the boards?
I cannot set common ground for all, or what you mean with this?

As far as i understand pi can be powerd from usb only is that right? And work without external adapter
If yes
then 1. If your hub is powered one power it from PSU 5v then PI shall get power from HUB
2. If hub is not powered one cut usb cable Pi to Hub and feed red wire with 5V from PSU
OK?
And disable WiFi better to remove the card if it is not built in

If pi needs external adapter just take 12V or 5V or whatever it needs from psu. Find a power jack and wire it accourdingly
In that case cut red - usb cable from pi to hub to avoid overfeeding
And finally there is always a chance a board to be faulty try all three one by one to see if there are disconnects

iFA88

full member

Activity: 237

Merit: 100

Quote from: loshia on January 16, 2014, 10:12:07 AM

Quote from: iFA88 on January 16, 2014, 10:07:17 AM

]
On low clock its the same error.

Same as above dude do as i suggest
lsusb sorry i missed it
common ground for everything
cut red wire of usb data cable
change hub

Something is not right in your setup

and pls post top output so we can see cpu usage
So without external pi power? only usb to the hub? With wifi disabled?

So, u say i should remove the powering from USB hub to the boards?
I cannot set common ground for all, or what you mean with this?

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: iFA88 on January 16, 2014, 10:07:17 AM

]
On low clock its the same error.

......

and pls post top output so we can see cpu usage
So without external pi power? only usb to the hub? With wifi disabled? and only one,two,three boards? you have three boards and one of them is connecting/disconnecting?

iFA88

full member

Activity: 237

Merit: 100

]
On low clock its the same error.

iFA88

full member

Activity: 237

Merit: 100

Quote from: loshia on January 16, 2014, 09:55:22 AM

Quote from: iFA88 on January 16, 2014, 09:52:01 AM

I use the normal clock and volt, but they still doubling.. This should not ben happen.. and not spoken from the hash performance..
Any ideas?
I have a GigaByte Odin plus 700W Power supply: GE-G700-C1
They come with two cable of molex:
#1 cable, there are 3 molex connectors and i use only 2 from it
#2 cable, there are 1 molex connectors and i use this.
11.68 volt is end of the cable.

lsusb?
what is your hub?
Make sure you power everything usb hub boards + pi from a SINGLE power supply
Once again if you are in Germany use this pls
http://www.amazon.de/dp/B00602C91U/ref=pe_386171_38075861_TE_item
I will say a crapy hub
there is internal buffer 64 nonces so basically you are reading same result twice with big delay. Each nonce is checked against it and if dupe - which happens is not sent to the pool
OFF boards (appearing and disappearing) is not a good sign or 12V problem or USB issues

lsusb:

Code:

root@rpi:/etc# lsusb
Bus 001 Device 005: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 008: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter
Bus 001 Device 006: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 033: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 031: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo
Bus 001 Device 032: ID 04d8:000a Microchip Technology, Inc. CDC RS-232 Emulation Demo

my hub is:
http://www.trust.com/products/product.aspx?artnr=15140
I power the RPI with microUSB with seperated adapter. But without this work too, because the USB hub power back to the RPI.
On the USB hub seems all correct.
The pool has rejected the duplicated job, so they send it to the pool.

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: iFA88 on January 16, 2014, 09:52:01 AM

I use the normal clock and volt, but they still doubling.. This should not ben happen.. and not spoken from the hash performance..
Any ideas?
I have a GigaByte Odin plus 700W Power supply: GE-G700-C1
They come with two cable of molex:
#1 cable, there are 3 molex connectors and i use only 2 from it
#2 cable, there are 1 molex connectors and i use this.
11.68 volt is end of the cable.

lsusb?
what is your hub?
Make sure you power everything usb hub boards + pi from a SINGLE power supply - The goal is to HAVE COMMON GROUND from PSU only
Once again if you are in Germany use this pls
http://www.amazon.de/dp/B00602C91U/ref=pe_386171_38075861_TE_item
I will say a crapy hub
there is internal buffer 64 nonces so basically you are reading same result twice with big delay. Each nonce is checked against it and if dupe - which happens is not sent to the pool
OFF boards (appearing and disappearing) is not a good sign or 12V problem or USB issues
Fanaly you can cut red wire - PI to HUB cable - strip usb cable and cut red wire to avoid overfeeding pi USB port

iFA88

full member

Activity: 237

Merit: 100

I use the normal clock and volt, but they still doubling.. This should not ben happen.. and not spoken from the hash performance..
Any ideas?
I have a GigaByte Odin plus 700W Power supply: GE-G700-C1
They come with two cable of molex:
#1 cable, there are 3 molex connectors and i use only 2 from it
#2 cable, there are 1 molex connectors and i use this.
11.68 volt is end of the cable.

TylerRice

member

Activity: 115

Merit: 10

marto74 Can you please get us an update on what date you are up to with postage? its been a while since we had a solid answer and I'm sure you can get one if you needed to.

Thanks.

awgilyas

full member

Activity: 147

Merit: 100

I've gotten the updated version of the miner with the molex connector directly on the board instead of having the blue wire thing. Grin

gusto88

newbie

Activity: 21

Merit: 0

Just used one online virus scanner on hexminer.exe from the technobit website and only avast recognizes it as a torjan horse (MSIL:BitCoinMiner-B):
https://www.virustotal.com/en/file/45e2e2adad8d9a7811c2e928171d821d6ce0d816f0cdfb4a0061e947b5943b31/analysis/1389839836/
(SHA1, SHA256 and MD5 under "Additional Information")

MSIL:BitCoinMiner-B is not new, there are posts on the internet from 2012. For me this looks like a false positive.

marto74

hero member

Activity: 728

Merit: 500

HI,
All I did already answered in mail.
but for all others.
Hexminer software on our site is there for more than 2 months and has not been updated.
There is no way it took your btc.
Also there are 2 possibilities by my opinion.
1. Your Av is just detecting this as far all mining malware is using similar code
2.YOu have it on your PC and hexminer.exe got infected there.

Can you show us block chain transaction of these 0.2 btc . please

btmtb

sr. member

Activity: 291

Merit: 250

Scam-Busting PSA: Beware of Black Arrow Software

Quote from: mudge on January 15, 2014, 03:00:54 PM

I only had 0.2 and some dust it took 2 amounts out which = 100%

Also I have run avast with most upto date defs and this is the only virus it finds

I'm genuinely doubtful Hexminer was the cause. Did you download the binary from technobit website? If so, do you know how to generate an MD5 hash, it would be interested to see if it matches an MD5 of the official binary?

awgilyas

full member

Activity: 147

Merit: 100

Just got my miners. Sadly I still have classes for the day. Tongue

Thanks Marto. Now, to see if they run as advertised. Cheesy

Jeffrey

full member

Activity: 182

Merit: 100

Quote from: loshia on January 15, 2014, 02:41:18 PM

To all who use hex miner guy's do you have missing btc for your wallets?
Most probably your av does not like exe name and that is why it says it is a virus

Hate to read that somebody got robbed from his BTC. However, I've ran hexminer for a few weeks and all my BTC are still in my wallet (and that's quite a bit more than 0.2)
Don't forget, there are trojans/virusses around which just infect any .exe they "see" so it doesn't have to come from the hexminer .exe

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: mudge on January 15, 2014, 03:00:54 PM

I only had 0.2 and some dust it took 2 amounts out which = 100%

Also I have run avast with most upto date defs and this is the only virus it finds

Blockchain?
When transactions were made before or after hex miner was installed?

mudge

member

Activity: 92

Merit: 10

I only had 0.2 and some dust it took 2 amounts out which = 100%

Also I have run avast with most upto date defs and this is the only virus it finds

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: mudge on January 15, 2014, 01:50:45 PM

Why is Hex Miner infected by Trojan/MSIL.BitCoinMiner.b

Ever since I used your software I have had over 0.2 BTC stolen from my wallet.

This was Downloaded from your site.

Please explain yourselves

That is a big nonce for me.
Just a question how many btc do you have in your wallet. If I made a troian I will make sure that it will steal 100% of your wallet and all wallets around
No serious
1 use tplink and build it yourself first make sure to check the cgminer patch cgminer itself and whatever you want
2. I do as follows on a separate PC which goes to the bank only I keep my wallet so before you found out that your coins are gone make new btc address and transfer your cons there
To all who use hex miner guy's do you have missing btc for your wallets?
Most probably your av does not like exe name and that is why it says it is a virus

wald4tler

member

Activity: 118

Merit: 10

Quote from: braindead on January 10, 2014, 09:54:39 AM

Hello

My last order has been send Wink

Your order with the reference ZCVYIHWDO is currently in transit..

Day 05/12

Great news

you happier, unfortunately I have to wait for the product, and in the meantime build snowmens in Austria Cheesy

^^
(Order No. CRTRDAJOC 2013-12-06 )

mudge

member

Activity: 92

Merit: 10

Why is Hex Miner infected by Trojan/MSIL.BitCoinMiner.b

Ever since I used your software I have had over 0.2 BTC stolen from my wallet.

This was Downloaded from your site.

Please explain yourselves

cannachris

sr. member

Activity: 406

Merit: 250

cats love crypto | 911 truth @checktheevidence.com

Dear technobit: One of my two hex16a2 miners just stopped working a day ago no lights are lighting up and windows doesn't detect a device anymore when you plug it in. I added a ticket to my new order for a hex16b BJJNEKBIM asking for a replacement. I will gladly also ship the broken miner back to you if you want.

I will let you guys know how they handle this.

Topic: Re: [ANN] Technobit HEX16A2 - 24 Ghs - 50 EUR 48 h shippment - page 25. (Read 104884 times)