Topic: [Review] Avalon 4.1 Miner- Summer Mining - Notlist3d - page 4. (Read 14521 times)
They used to be industry leader but now they mimic the design of SP20
I finally got all parts needed to do in house 240 volts correctly. I will post results on my thread tonight.
Still running great. Very stable it's running great in the cool morning air.
Thanks for sharing philipma1957. It does a nice job on under clocking. I was happy to get 3 of them running on 1 110 breaker. Still have not made jump to a 240.
Today they are running in some of that 80 degree summer heat. So far doing great. It turned out to be a great week to test in summer conditions.
I am testing low clocks today. still using my 120 volt power as I am able to do volt/watt reading.
589 watts for the screenshot below so 589/1200 = 0.49083 watts a gh
Today they are running in some of that 80 degree summer heat. So far doing great. It turned out to be a great week to test in summer conditions.
I am able to report been running for three miners for three day's and have been very stable.
I have added a review showing 3 Avalon 4.1's running - https://bitcointalksearch.org/topic/m.10946156
I have added a review showing 3 Avalon 4.1's running - https://bitcointalksearch.org/topic/m.10946156
nice are they the silver or black models.
All 3 are Silver 4.1 models. I will get better pictures tomorrow with more lighting.
nice are they the silver or black models.
Three Avalon 4.1's so far happily mining together. I would consider very stable at this point. Need to add some lighting I appolgize it's darker then I originally thought.
Been testing 3 for a little less then 24 hours. So far running great as far as stability. Again I am using a Raspberry Pi to control them, it is working out great.
More to come I have been documenting this from unpacking till now.
More to come I have been documenting this from unpacking till now.
Nice findings.
Looking forward to your results on the 1.2TH area. findings....Could the Avalon be the one that should be standing next to my SP20 `s ?
Looking forward to your results on the 1.2TH area. findings....Could the Avalon be the one that should be standing next to my SP20 `s ?
That is a nice speed on 2 units. I to can't make it work out with price of electricity. I was able to get all 3 of mine on a single 110 circuit with underclock.
I'm using gold power supplies, but still very happy to get it all on 1 110 circuit. I am looking into changing a lot with my summer mining area. Still working to add airflow, I want to run this summer without using AC on miners.
I'm using gold power supplies, but still very happy to get it all on 1 110 circuit. I am looking into changing a lot with my summer mining area. Still working to add airflow, I want to run this summer without using AC on miners.
Yeah I am losing money or breaking even, but I will do it for a day to help people get an idea of the top end limits.
That is a nice speed on 2 units. I to can't make it work out with price of electricity. I was able to get all 3 of mine on a single 110 circuit with underclock.
I'm using gold power supplies, but still very happy to get it all on 1 110 circuit. I am looking into changing a lot with my summer mining area. Still working to add airflow, I want to run this summer without using AC on miners.
I'm using gold power supplies, but still very happy to get it all on 1 110 circuit. I am looking into changing a lot with my summer mining area. Still working to add airflow, I want to run this summer without using AC on miners.
yeah that is a good speed mid 900's > I am doing a speed test on my 2.
these start pulling a lot of power on the higher clocks.
note the volts are set at 8750 that is 9.375 percent over stock of 8000
I just wired 1 socket for 240 volts about time. I am using an evga 1600 p2 for 1 unit and an Intel server psu 1200 watts at 240 volts along with 94% efficiency.
It is still not too bad for sound, I think I could squeeze out 2650 or 2700gh for 2 units ,but the power cost makes it a dumb thing for me.
I know some people want to max gear due to free power. look at my errors and my temps these can do more then 1260 each like they are doing here.
these start pulling a lot of power on the higher clocks.
note the volts are set at 8750 that is 9.375 percent over stock of 8000
I just wired 1 socket for 240 volts about time. I am using an evga 1600 p2 for 1 unit and an Intel server psu 1200 watts at 240 volts along with 94% efficiency.
It is still not too bad for sound, I think I could squeeze out 2650 or 2700gh for 2 units ,but the power cost makes it a dumb thing for me.
I know some people want to max gear due to free power. look at my errors and my temps these can do more then 1260 each like they are doing here.
So far the 2 new miners are working great with the first one. Below is a image of the three running a little underclock.
Quick shipping from Ehash. Now I am up to a set of three. It is working good it appears by just plugging them in usb hub.
Have some testing to do so I can add more info
Have some testing to do so I can add more info
So you went to the hub and did not daisy-chain?
Correct I had a cheap hub. Just used it. It's a non-powered hub. So far it seems to work great with the 3 of them.
Quick shipping from Ehash. Now I am up to a set of three. It is working good it appears by just plugging them in usb hub.
Have some testing to do so I can add more info
Have some testing to do so I can add more info
So you went to the hub and did not daisy-chain?
Sweet! 
I wish I had 3 avalon!
I wish I had 3 avalon!
Quick shipping from Ehash. Now I am up to a set of three. It is working good it appears by just plugging them in usb hub.
Have some testing to do so I can add more info
Have some testing to do so I can add more info
Jump to: