Got the Ant powered up (nice touch this round adding 6-pin power adapters). Unfortunately networks not my friend.
Using a Mac to config, set pool and wan address as discussed. LAN set as DHCP and wan setting remain static unique address (192.168.1.11) Sound correct? After attached to router, machine would not mine. I rebooted and now cannot communicate with the Ant!
Please advise!
Topic: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner - page 154. (Read 452366 times)
So I have he Nov 29th firmware but the Rev 1 timings in my asic-config file on the one I just received. Interesting. I'm also hashing slightly lower at stock than the last one. I wanted to try the 375 timings to try and get to the right hash but I'm nervous to use them if I have rev 1 boards since the rev 1 timings didn't list a 375.
1) the discolouration seems to be that the antminer logo stamping on the chips was done poorly. some of mine the logo is illegible, others it is properly 'inked' with brown colour
2) paper towel, making sure not to apply force and avoid pushing the paste into components
3) i beleive they are M2 sized screws, perhaps M3
4) could be a bit of oilyness from thermal paste if it was wiped away from another area or someone who handled your board had just touched paste?
I looked at it again it appears that the oily substance is not thermal paste but it also what is on the chips to make them turn a 'wet' looking black.
I used alcohol and paper towels to clean up most of the paste.
I will try to source some screws like this locally but in Alaska this might be a fools errand.
My big issue when getting home from work will be trying to get the third miner to resolve the DNS, from what sushi's post says on the Page 1. Both the others are working just fine but the third is having issues.
Hmm - I'll have to keep an eye out for the thermal paste "oozing"... don't recall seeing it yet..
How long has yours been running when that started to happen?
How long has yours been running when that started to happen?
A few questions for sushi or BITMAIN, whoever gets to it first.
Here are the pictures for the questions.
http://imgur.com/a/R4jCZ
1: A few of my chips are discolored. Will this effect performance? I have not turned it one yet since something might be wrong.
2: Is there a good way to clean up the thermal paste that is oozing out of the screw holes and will it affect the performance.
3: Is there any way to get some replacement screws for the middle of the machine on picture 2? it came with those two missing.
4: There is an oily substance on the board and chips on two out of four machines (not sure what it is). Would rubbing alcohol take it off?
Thank you,
Nairb131
Here are the pictures for the questions.
http://imgur.com/a/R4jCZ
1: A few of my chips are discolored. Will this effect performance? I have not turned it one yet since something might be wrong.
2: Is there a good way to clean up the thermal paste that is oozing out of the screw holes and will it affect the performance.
3: Is there any way to get some replacement screws for the middle of the machine on picture 2? it came with those two missing.
4: There is an oily substance on the board and chips on two out of four machines (not sure what it is). Would rubbing alcohol take it off?
Thank you,
Nairb131
1) the discolouration seems to be that the antminer logo stamping on the chips was done poorly. some of mine the logo is illegible, others it is properly 'inked' with brown colour
2) paper towel, making sure not to apply force and avoid pushing the paste into components
3) i beleive they are M2 sized screws, perhaps M3
4) could be a bit of oilyness from thermal paste if it was wiped away from another area or someone who handled your board had just touched paste?
ok CM 1200W gold, running 1 ant and 1 BFL 60GH, power meter show 11.95V, and other 2 ant with 1000W CM gold draw 740W power meter show 11.80V hashing very well,
check all power cable all tight very tight.
i thing not the power issue
check all power cable all tight very tight.
i thing not the power issue
Ok... could be an issue. Make sure all your power is tight and you are supplying enough.
Ok... could be an issue. Make sure all your power is tight and you are supplying enough.
done many time, shut off wait for 30m and same, is hash 160~170GH
Shut it down, wait a couple, reboot.
Shut it down, wait a couple, reboot.
after hashing well few days or a week
startup VVVVV
run 4m VVVVV
in chain 1 it show xxxxxxxx xxxxxoxo xoxoxoxo ooooooox
RMA ?
startup VVVVV
run 4m VVVVV
in chain 1 it show xxxxxxxx xxxxxoxo xoxoxoxo ooooooox
RMA ?
Nice tut, but here is a little mistake:
"
Set your computer's IP address to the following:
IP Address: 192.168.2.254
Subnet: 255.255.255.0
Default Gateway: 192.168.2.1
For the DNS Setting: Select “Obtain DNS server address automatically"
This is simple impossible, because the Selection is on manuell and can't select automatically. You should instead of the select point write: Don't change any settings for DNS, just let the entrys free.
"
Set your computer's IP address to the following:
IP Address: 192.168.2.254
Subnet: 255.255.255.0
Default Gateway: 192.168.2.1
For the DNS Setting: Select “Obtain DNS server address automatically"
This is simple impossible, because the Selection is on manuell and can't select automatically. You should instead of the select point write: Don't change any settings for DNS, just let the entrys free.
i have been having trouble with configuration, i just can;t get the interface to mine, i am sure its a configruation problem, just to clarify i have an ethernet cable which goes into a powerline adapter from the miner, where the connection is transmitted wirelessly into the wireless adapter downstairs, this then goes into my router, and then my router is plugged into my modem.
This is the second day i could;t get my miner to mine, and i don't know if its becouse i am using the wrong ip adresses in configuration, could anyone please help me out
Thanks!
This is the second day i could;t get my miner to mine, and i don't know if its becouse i am using the wrong ip adresses in configuration, could anyone please help me out
Thanks!
SUshi sorted my problem, thanks sushi!
I will forward this to their tech! I'll get back with you!
A few questions for sushi or BITMAIN, whoever gets to it first.
Here are the pictures for the questions.
http://imgur.com/a/R4jCZ
1: A few of my chips are discolored. Will this effect performance? I have not turned it one yet since something might be wrong.
2: Is there a good way to clean up the thermal paste that is oozing out of the screw holes and will it affect the performance.
3: Is there any way to get some replacement screws for the middle of the machine on picture 2? it came with those two missing.
4: There is an oily substance on the board and chips on two out of four machines (not sure what it is). Would rubbing alcohol take it off?
Thank you,
Nairb131
Here are the pictures for the questions.
http://imgur.com/a/R4jCZ
1: A few of my chips are discolored. Will this effect performance? I have not turned it one yet since something might be wrong.
2: Is there a good way to clean up the thermal paste that is oozing out of the screw holes and will it affect the performance.
3: Is there any way to get some replacement screws for the middle of the machine on picture 2? it came with those two missing.
4: There is an oily substance on the board and chips on two out of four machines (not sure what it is). Would rubbing alcohol take it off?
Thank you,
Nairb131
A few questions for sushi or BITMAIN, whoever gets to it first.
Here are the pictures for the questions.
http://imgur.com/a/R4jCZ
1: A few of my chips are discolored. Will this effect performance? I have not turned it one yet since something might be wrong.
2: Is there a good way to clean up the thermal paste that is oozing out of the screw holes and will it affect the performance.
3: Is there any way to get some replacement screws for the middle of the machine on picture 2? it came with those two missing.
4: There is an oily substance on the board and chips on two out of four machines (not sure what it is). Would rubbing alcohol take it off?
Thank you,
Nairb131
Here are the pictures for the questions.
http://imgur.com/a/R4jCZ
1: A few of my chips are discolored. Will this effect performance? I have not turned it one yet since something might be wrong.
2: Is there a good way to clean up the thermal paste that is oozing out of the screw holes and will it affect the performance.
3: Is there any way to get some replacement screws for the middle of the machine on picture 2? it came with those two missing.
4: There is an oily substance on the board and chips on two out of four machines (not sure what it is). Would rubbing alcohol take it off?
Thank you,
Nairb131
One 1000W for 2 Antminer S1 in one case ( we are building it )
Id be interested in these! I have 4 more miners on the way.
Also...
Does anyone know why I can't access my miner web interfaces/SSH into them wirelessly? They both hash and connect to my router but I can't for the life of me figure out why they aren't connecting. Any help would be greatly appreciated!
One 1000W for 2 Antminer S1 in one case ( we are building it )
hi does anyone know if the below power supply(600WATT) is enough to power 2 antminer? thanks
http://www.amazon.com/gp/product/B0064XAIXQ/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
http://www.amazon.com/gp/product/B0064XAIXQ/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
It would work for 1 antminer, since there is 552W available on the 12V circuit. An antminer at 180GHash will draw around 300-360W. At 200GHash it will reportedly draw over 500W
but there is not a chance in hell you can run 2 antminers off a single 600W PSU
hi does anyone know if the below power supply(600WATT) is enough to power 2 antminer? thanks
http://www.amazon.com/gp/product/B0064XAIXQ/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
http://www.amazon.com/gp/product/B0064XAIXQ/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Would it be a firewall issue on the Miners side? I tried to look for a setting in my router for AP Isolation, but found nothing.
Well, it looks like some firewall issue on the Miner side of some sort of config bug/feature? Or some sort of config error from my side 
I can't ping the wifi ip-address anymore as soon as i disconnect the lan cable, when i plug the cable back in i can reach the miner again on the Wifi ip-address.
Are there any AntMiner users who are able to use the miner with the build-in wifi adapter?
this seems to be the only question left unanswered, I changed the Antminers IP's to the same subnet as my router and it connects and hashes, but I cannot SSH or use the web interface.
any clues as to why this is happening??
Would it be a firewall issue on the Miners side? I tried to look for a setting in my router for AP Isolation, but found nothing.
Well, it looks like some firewall issue on the Miner side of some sort of config bug/feature? Or some sort of config error from my side I can't ping the wifi ip-address anymore as soon as i disconnect the lan cable, when i plug the cable back in i can reach the miner again on the Wifi ip-address.
Are there any AntMiner users who are able to use the miner with the build-in wifi adapter?
Jump to: