Only one side working the now having to wait in a cable arriving tomorrow but currently 91Gh/s so very happy
Might look into the SSH overclock to edit the file once I have everything running sweet.
Anyway thanks Sushi and Bitman again
Topic: SHIPPED Dec 3 - [GROUP BUY] Bitmain AntMiner S1 180 GH/S 50 Units - page 2. (Read 26195 times)
December 06, 2013, 11:08:58 AM
Thanks and have cleaned up and made sure they were tight,
Only one side working the now having to wait in a cable arriving tomorrow but currently 91Gh/s so very happy
Might look into the SSH overclock to edit the file once I have everything running sweet.
Anyway thanks Sushi and Bitman again
Only one side working the now having to wait in a cable arriving tomorrow but currently 91Gh/s so very happy
Might look into the SSH overclock to edit the file once I have everything running sweet.
Anyway thanks Sushi and Bitman again
December 06, 2013, 09:43:49 AM
Yes it's the thermal paste, it must've been under pressure and leaked out the screw holes in shipping.
I received my unit as well as a replacement part I requested. Bitmain really pulled through on the issue and I plan to put a full review later.
However, I noticed that when I removed the secondary board from my auction batch1 unit, the thermal paste is obviously machine-applied, with a dot of paste placed every cm or so. However, it was obvious that only some of this paste was in contact (flattened properly) and a few areas the dots of paste were clearly under little pressure as the paste had not spread out. It may be a good idea for everyone who receives a unit to check the tension of all the hex screws, and if necessary give them an extra twist to ensure full contact to the heatsink
I received my unit as well as a replacement part I requested. Bitmain really pulled through on the issue and I plan to put a full review later.
However, I noticed that when I removed the secondary board from my auction batch1 unit, the thermal paste is obviously machine-applied, with a dot of paste placed every cm or so. However, it was obvious that only some of this paste was in contact (flattened properly) and a few areas the dots of paste were clearly under little pressure as the paste had not spread out. It may be a good idea for everyone who receives a unit to check the tension of all the hex screws, and if necessary give them an extra twist to ensure full contact to the heatsink
December 06, 2013, 09:33:14 AM
UPS man finally came today and issued me with the £52.92 Charge for "handling" He then went and took my credit card away and it then got declined because he blocked it says my bank.
I then had to go find a cheque book and he was giving me so much grief it was unreal he declined the first check then when I was writing the second he said I was wasting his time and said he would come back monday.
Finally he accepted the 2nd one.
Open the packaged to find what I think to be thermal paste everywhere.
Also loads on the boards
is this suppose to be like this ? As don't want to turn them on till confirmed
Thanks
I then had to go find a cheque book and he was giving me so much grief it was unreal he declined the first check then when I was writing the second he said I was wasting his time and said he would come back monday.
Finally he accepted the 2nd one.
Open the packaged to find what I think to be thermal paste everywhere.
Also loads on the boards
is this suppose to be like this ? As don't want to turn them on till confirmed
Thanks
December 06, 2013, 08:33:40 AM
Seems to be monday delivery for my ants... How many got the shipment inspected by customs? Seems that is why its not delivered, thanx sushi and bitmain for fast and exelent service!
Did not know i was having a ant farm when adult! :-)
Did not know i was having a ant farm when adult! :-)
December 06, 2013, 08:25:23 AM
Wifey decided to play a prank on me. I almost shit myself... LOL
you got a cool wife
December 06, 2013, 05:17:12 AM
I will! But it could be a brick sale!
Good news. Sushi has my email but pls do let me know when. Thanks!
Quote from: cxboyminer link=topic=353650.msg3847529#mspAg3847529 date=1386320636
Sushi and I will be doing the next batch when BITMAIN confirms they have enough products waiting to be shipped.
Good news. Sushi has my email but pls do let me know when. Thanks!
December 06, 2013, 04:24:04 AM
Sushi and I will be doing the next batch when BITMAIN confirms they have enough products waiting to be shipped.
Good news. Sushi has my email but pls do let me know when. Thanks!
December 06, 2013, 04:03:56 AM
Sushi and I will be doing the next batch when BITMAIN confirms they have enough products waiting to be shipped.
December 06, 2013, 03:48:27 AM
Got mine in today as well... so far hashing higher then the expected 180.
Big thumbs up!
Big thumbs up!
December 06, 2013, 03:23:37 AM
Hillarious! Well my box finally got released from customs in California, so hopefully you guys stuck in customs are seeing an update in your tracking. The bummer part is that they now are showing a delivery of Monday. If I see it makes to the state I will see if I can do a pickup at the airport.
Mine was released from customs today at 10:08 pm. Should arrive tomorrow. Work won't go fast enough.
December 06, 2013, 02:33:37 AM
I also received my two Antminer units today. Having an address at a UPS Store ROCKS. I've never seen a package move from China to NY in 2 days. Well done Sushi/Bitmain, keep me updated on further stock.
Will post pictures in the morning.
Will post pictures in the morning.
December 06, 2013, 02:19:34 AM
Hillarious! Well my box finally got released from customs in California, so hopefully you guys stuck in customs are seeing an update in your tracking. The bummer part is that they now are showing a delivery of Monday. If I see it makes to the state I will see if I can do a pickup at the airport.
December 05, 2013, 10:36:44 PM
Got my units today:
I've never seen a package to move thru UPS system this quick.
http://home.comcast.net/~bacanj/btc/brick.jpg
Wifey decided to play a prank on me. I almost shit myself... LOL
Thank you Sushi
I've never seen a package to move thru UPS system this quick.
http://home.comcast.net/~bacanj/btc/brick.jpg
Wifey decided to play a prank on me. I almost shit myself... LOL
Thank you Sushi
December 05, 2013, 10:32:38 PM
Got my two units in today, and they are happily hashing away. Thank you sushi ! Looking forward to the next batch !
December 05, 2013, 10:03:26 PM
Yes! This do really works. however, the S1 is designed to run optimum at 180gh range and over clocking may void your warranty as you have to modify the config file of the unit. CAUTION!!! Without the proper cooling and the power supply, it could hurt your lovely Ant!
Thanks for Goxed to making the list! It does really work!
Thanks for Goxed to making the list! It does really work!
December 05, 2013, 09:55:58 PM
Not yet but if you could shoot me an email at [email protected]. I will keep you inform as soon as I know a group buy, auctions I, last minutes cancellations and other I stock ASIC sales elsewhere!
Sushi, any word when the next batch of these will be coming round the mountain? thx!
December 05, 2013, 09:51:38 PM
Thanks for participating in the groou buy and sorry about the postal code screw up on my part! Great to hear its hashing away at 200gH more bung for the money!
It's a beautiful thing... China to Connecticut in 2 days, set up in 45 minutes (had to find my wire strippers, took a bit) and overclocked in about 10 seconds. Happily hashing away at 200Ghz. Huzzah! Thanks again sushi for taking this over.
December 05, 2013, 09:47:28 PM
Would you kind enough to post a close up of your PSU to be able to see the brand?
Also close look on your wire connections!
Also if the wires are getting hotter or not.
Also the hard reboot the power cycle and take some sample status on the ant miners in a few hours time frame. Such as 39 minutes between or an hour between?
Thank you!
I have got between 1-4 x . This is connected with power supply.
You should check wires, try reboot machine.
let us know.
I already reboot, and lowered my x from 4 to 1 on blade nr.1.
i did reboot and am getting a bit better, but still 10% less than 180gh/s. and as you can see the 2nd one is worse than the 1st with almost a full row of X's.
1st -
2nd -
btcguild stats -
Also close look on your wire connections!
Also if the wires are getting hotter or not.
Also the hard reboot the power cycle and take some sample status on the ant miners in a few hours time frame. Such as 39 minutes between or an hour between?
Thank you!
my 2 have arrived and are hashing. only concern is they are only hashing around 140 - 145 gh/s according to the web configuration, but only shows 120+ on btcguild. some of the asic's are showing an X in the asic status. temp's are showing below 50. who do i need to get with for support/returns/replacement/etc?
Hi can you show us your stats ??I have got between 1-4 x . This is connected with power supply.
You should check wires, try reboot machine.
let us know.
I already reboot, and lowered my x from 4 to 1 on blade nr.1.
i did reboot and am getting a bit better, but still 10% less than 180gh/s. and as you can see the 2nd one is worse than the 1st with almost a full row of X's.
1st -
2nd -
btcguild stats -
December 05, 2013, 09:42:22 PM
Please try the hard power cycle with at least 39 seconds of break between! And the. Check the ASIC status page and see if there are any "x" instead of 8 "0"s
The perfect machines may see x time tori shut that should be just random locations. If problem persist, please email me the picture of your power supply and how you wire the power cables and a few screenshots of the status pages from a few hours between as the samples.
The could t on a BTCGuild differs time time but in a kong term average should equal out. If the btcguild speed seems too low, try other pools and see!
The control panel shows the real hashing rate as btcguild shows what they received from your ant is the network, so if there are traffic issues, it could count a bit lower. Also I have seen the gh rate higher than my test machines reported...
[email protected]
The perfect machines may see x time tori shut that should be just random locations. If problem persist, please email me the picture of your power supply and how you wire the power cables and a few screenshots of the status pages from a few hours between as the samples.
The could t on a BTCGuild differs time time but in a kong term average should equal out. If the btcguild speed seems too low, try other pools and see!
The control panel shows the real hashing rate as btcguild shows what they received from your ant is the network, so if there are traffic issues, it could count a bit lower. Also I have seen the gh rate higher than my test machines reported...
[email protected]
my 2 have arrived and are hashing. only concern is they are only hashing around 140 - 145 gh/s according to the web configuration, but only shows 120+ on btcguild. some of the asic's are showing an X in the asic status. temp's are showing below 50. who do i need to get with for support/returns/replacement/etc?
December 05, 2013, 09:34:34 PM
I do! With a grapefruit chaser
I am waiting for one more unit as well .
Ok who want a shoot of vodka ?
.Ok who want a shoot of vodka ?
Jump to: