now claymore will take optimizations from this open source and make his miner even faster lol
i get the same results with v5 as with claymore 4, with almost no CPU usage vs claymore 50% cpu.
Very good job guys.
Topic: SILENTARMY v5: Zcash miner, 115 sol/s on R9 Nano, 70 sol/s on GTX 1070 - page 60. (Read 209309 times)
November 12, 2016, 03:24:39 AM
November 12, 2016, 03:24:10 AM
Any 280x results?
73-75-77 sol/s on default settings without overclocking November 12, 2016, 03:14:59 AM
dont work for me (((
first install cygwin - python, then run miner with python
Пocлe зaпycкaй setup-x86_64 и пpи выбope пaкeтoв нaйди в пoиcкe cлeвa ввepxy Python3 в paздeлe Interpretators
https://www.dropbox.com/sh/grmw9mhfzwj4gy4/AABerl76dk3mxoY_i_KRfTFDa?dl=0
November 12, 2016, 03:11:20 AM
Any 280x results?
November 12, 2016, 03:09:43 AM
Anyone running this on a Tahiti ?
Some stats with the latest build (built on 14.04, runs on 14.04 and 16.04):
RX470 Nitro+ 4GB, Hynix RAM, modded bios (1500 straps), default GPU clock, 1925 memory clock - 83.5 sol/s
Linux 16.04, amdgpu-pro
Code:
Total 501.8 sol/s [dev0 86.3, dev1 86.6, dev2 85.3, dev3 78.5, dev4 83.1, dev5 88.5] 672 shares
Total 501.8 sol/s [dev0 84.1, dev1 86.1, dev2 86.6, dev3 80.1, dev4 82.1, dev5 88.7] 672 shares
Total 501.2 sol/s [dev0 80.8, dev1 86.4, dev2 87.7, dev3 83.5, dev4 82.6, dev5 87.8] 672 shares
Total 501.1 sol/s [dev0 79.2, dev1 89.3, dev2 87.9, dev3 85.7, dev4 79.3, dev5 86.8] 672 shares
Total 501.7 sol/s [dev0 80.9, dev1 90.6, dev2 84.6, dev3 85.5, dev4 78.5, dev5 85.6] 672 shares
RX470 Nitro+ 4GB, Elpida RAM, modded bios (1500 straps), default GPU clock, 2000 memory clock - 87 sol/s
Linux 16.04, amdgpu-pro
Code:
Total 88.0 sol/s [dev0 90.6] 330 shares
Total 86.8 sol/s [dev0 87.2] 330 shares
Total 86.5 sol/s [dev0 88.0] 330 shares
Total 87.3 sol/s [dev0 89.8] 330 shares
Total 86.7 sol/s [dev0 88.8] 330 shares
dev1: 380X, stock bios, stock clocks - 45 sol/s
dev2: 7950, stock bios, 1050 GPU, 1550 memory - 70 sol/s (slower than below due to very old AMD CPU)
Linux 14.04, fglrx
Code:
Total 116.6 sol/s [dev1 46.4, dev2 69.8] 360 shares
Total 117.5 sol/s [dev1 44.7, dev2 70.1] 360 shares
Total 116.7 sol/s [dev1 43.9, dev2 70.6] 360 shares
Total 117.6 sol/s [dev1 45.2, dev2 71.0] 360 shares
Total 116.7 sol/s [dev1 45.1, dev2 69.0] 360 shares
Total 115.6 sol/s [dev1 45.2, dev2 66.3] 360 shares
Total 115.6 sol/s [dev1 45.8, dev2 67.6] 360 shares
Total 114.8 sol/s [dev1 45.4, dev2 64.4] 360 shares
7970, stock bios, 1150 GPU, 1500 memory - 70 sol/s
Linux 14.04, fglrx
Code:
Total 70.5 sol/s [dev0 72.5] 358 shares
Total 71.1 sol/s [dev0 72.9] 358 shares
Total 71.0 sol/s [dev0 74.0] 358 shares
Total 70.6 sol/s [dev0 73.9] 358 shares
Total 70.4 sol/s [dev0 75.5] 358 shares
Total 70.3 sol/s [dev0 75.9] 358 shares
dev1/2: 7950, stock bios, 1050 GPU, 1550 memory - 73 sol/s (faster than above due to better CPU G3240)
dev3/4: 390X/390, stock bios, 1125/1150 GPU, 1500 memory - 100 sol/s
dev5: 7970, modded bios, 1150 GPU, 1500 memory - 85 sol/s
Linux 14.04, fglrx
Code:
Total 421.6 sol/s [dev0 74.0, dev1 72.8, dev2 98.9, dev3 98.0, dev4 81.4] 164 shares
Total 422.7 sol/s [dev0 73.7, dev1 72.6, dev2 102.1, dev3 98.8, dev4 80.6] 167 shares
Total 422.9 sol/s [dev0 70.7, dev1 71.1, dev2 101.4, dev3 98.1, dev4 85.0] 167 shares
Total 423.1 sol/s [dev0 71.3, dev1 73.5, dev2 102.7, dev3 99.0, dev4 84.6] 169 shares
Total 424.0 sol/s [dev0 70.9, dev1 73.9, dev2 102.6, dev3 99.2, dev4 85.7] 171 shares
Total 425.3 sol/s [dev0 71.9, dev1 72.4, dev2 103.1, dev3 99.9, dev4 85.5] 173 shares
Total 426.0 sol/s [dev0 72.7, dev1 73.2, dev2 98.6, dev3 100.9, dev4 86.3] 174 shares
Conclusion: now open-source miner has exactly same or better results comparing to closed-source CZM
November 12, 2016, 03:07:34 AM
I have three cards, but it will only see one, do I need to add a switch to the bat file for it to see all my gpus?
Yes.
For me it doesn't work :-(
Total 16.1 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 8.0 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 5.3 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 4.0 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 3.2 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 2.7 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 2.3 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 2.0 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 1.8 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 1.6 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 1.4 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 1.3 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 1.2 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 1.1 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 1.1 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 1.0 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
Total 0.9 sol/s [dev0 0.0, dev1 0.0, dev2 0.0, dev3 0.0, dev4 0.0] 0 shares
November 12, 2016, 03:01:12 AM
windows is working great for me on 470 and 480s
for the 295x2 however its not really cranking out what it should - its really low, maybe CPU problem?
and for my 980ti's the windows is giving a way lower hashrate than the linux install -
linux is about 60 H/s while windows is just about 20 H/s... CPU problem again? tried 375 drivers, 368 drivers and installing 362 now to see if that makes a difference, but 375 to 368 made no difference.
for the 295x2 however its not really cranking out what it should - its really low, maybe CPU problem?
and for my 980ti's the windows is giving a way lower hashrate than the linux install -
linux is about 60 H/s while windows is just about 20 H/s... CPU problem again? tried 375 drivers, 368 drivers and installing 362 now to see if that makes a difference, but 375 to 368 made no difference.
November 12, 2016, 02:59:53 AM
dont work for me (((
first install cygwin - python, then run miner with python
Пocлe зaпycкaй setup-x86_64 и пpи выбope пaкeтoв нaйди в пoиcкe cлeвa ввepxy Python3 в paздeлe Interpretators
https://www.dropbox.com/sh/grmw9mhfzwj4gy4/AABerl76dk3mxoY_i_KRfTFDa?dl=0
November 12, 2016, 02:57:34 AM
first install cygwin - python, then run miner with python
I have Instal python 3.4 and now I instal cygwin and don't work (((Я нe иcпoльзyю Windows, нo пoxoжe, чтo нyжнo иcпoльзoвaть python oт cygwin. Haтивнaя вepcия нe paбoтaeт.
November 12, 2016, 02:56:03 AM
r3 giving 65-70 sols/s on gtx 1080 (+495 mem) with 27% cpu usage (i5 4690k)
can you use xnsub with the ported version, i tried appending /#xnsub and it gave an error
can you use xnsub with the ported version, i tried appending /#xnsub and it gave an error
This commit should be included in r3:
https://github.com/mbevand/silentarmy/commit/47d4497ec7e516259674eb7dbdd4b39cbc95ab32
I wonder what happened to it...
November 12, 2016, 02:55:32 AM
I have three cards, but it will only see one, do I need to add a switch to the bat file for it to see all my gpus?
--use=0,1,2I have this in my bat but it still tells me mining on one device...maybe mt 750ti are too old?
November 12, 2016, 02:51:40 AM
dont work for me (((
maybe SA don't understand russian, read the readme ! always, u have to install some other stuff before it will work.
November 12, 2016, 02:47:33 AM
dont work for me (((
first install cygwin - python, then run miner with python
November 12, 2016, 02:43:25 AM
dont work for me (((
first install cygwin - python, then run miner with python
November 12, 2016, 02:40:48 AM
dont work for me (((
November 12, 2016, 02:35:10 AM
are those binary clean, they come from a new account, beaware here it's very easy to take a nice virus from someone
i would not touch them so easily unless they come from the owner of this thread
i would not touch them so easily unless they come from the owner of this thread
source code is also there so you can compile it yourself
November 12, 2016, 02:30:19 AM
are those binary clean, they come from a new account, beaware here it's very easy to take a nice virus from someone
i would not touch them so easily unless they come from the owner of this thread
i would not touch them so easily unless they come from the owner of this thread
November 12, 2016, 02:29:00 AM
Silentarmy v5 for windows cygwin port R3
1070 +600 mem +100 gpu
960 +200 gpu
instances=1
bump to 114 s/s ! good job!
with fixed main.c https://www.dropbox.com/s/h7bg6p6ra0lw15u/main.c?dl=0
just download and replace your old main.c
1070 +600 mem +100 gpu
960 +200 gpu
instances=1
bump to 114 s/s ! good job!
with fixed main.c https://www.dropbox.com/s/h7bg6p6ra0lw15u/main.c?dl=0just download and replace your old main.c
November 12, 2016, 02:22:16 AM
6.3 sol on my gtx660 and my system is lagging insanely. IS this normal ? lol
--instances 1
--instances 1
November 12, 2016, 02:19:41 AM
I just uploaded a new version of my Windows build of SILENTARMY v5:
https://mega.nz/#F!iwYQhI6S!2vl0D3jz3fH3-bZxHUurBg
Finally caught up with all the latest updates in the main branch, including a major speedup. Enjoy!
https://mega.nz/#F!iwYQhI6S!2vl0D3jz3fH3-bZxHUurBg
Finally caught up with all the latest updates in the main branch, including a major speedup. Enjoy!
Thanks. That bumped my R9 nanos to 108-110 sols/s. Now better than claymore~!
Jump to: