Topic: Sixth alt coin thread I forgot to mod last thread. - page 71. (Read 80191 times)

whatre your power limits at?

in that position the board recognizes  0 TI 1 Mini 2 TI so PL could be 200/125/200 as a base reference

individual power limit = yes
0 = 200
1 = 125
2 = 200

hey phil been off a bit lately please PM how much I owe you and where to send it

This seems almost too good to be true: https://www.aliexpress.com/item/Cheap-Mining-Rig-Machine-Antminer-8-NP106-Cards-1600W-ETH-185MH-s-ZEC-2500-Blackchain-Win10/32836106822.html

Prebuilt mining rig sold at cost on aliexpress.

Phil & Co,

Been following this thread for awhile, thank you all for your knowledge and insight.  I just setup my first "trio" mining rig (2x 1080 TI's & 1x 1070 Mini) about a week ago, and so far so good.  I am noticing one potential issue though, one of my 1080's seems to be really struggling compared to the other 2 cards.  What's weird, is even my 1070 Mini is producing considerably more Sol/W while using less power than the bad 1080. Something seems off there.... not too mention just comparing the 2 exact same 1080 cards, one is clearly outperforming the other.  I took photos on 4 separate days, so this has been ongoing, not just a bad hour or two.  See link below for photos of the GPU stats running on nvOC_19.

The 1080 that is struggling, is the same card I have the monitor plugged into.  Could that be the reason why?  Or is it a bad card? Or, maybe this is normal?  Any help would be a huge help, thank you!

FYI: GPU0 - 1080 TI, GPU1 - 1070 Mini, GPU2 - 1080 TI  (GPU0 & GPU2 are the exact same 1080 TI make/model)

https://www.flickr.com/gp/157030813@N04/X4d99y

thanks for the fast shipping im so sick of risers right now

I moved my 25k sola of nivida from nicehash to suprnova , nice hash pays less atm by almost tripple

@phill can you send a close picture of how you have this board hooked up ? Im still confused as to all the sata ports

no  they are 21 inches.


Spotswood  1 unit  paid ready to ship----tracking issued
Marvell2      2 units paid ready to ship----tracking issued
R0mi            1 unit paid  ready to ship ---tracking issued


Jaredkragen  1 unit paid  not ready
crazydane     1 unit paid not ready
vapourminer 1 unit paid  not ready


ATCkit... pending
VoskCoin... pending
Chili.Dog ... pending

I found 3 boxes  in the attic  so I will be able to ship  these three

Jaredkragen  1 unit paid  not ready
crazydane     1 unit paid not ready
vapourminer 1 unit paid  not ready


I have some pm requests  I will list them later today.

Hey Phil...can you do me a small favor and measure how wide these boards are please.
I'm really curious if they will fit into a 4U rack mount case

I have asked the seller - what cable would this be and is it provided, seems to be a standard EPS type CPU 4pin MALE to MALE.
I have 10 x Deltas ready for the 8-slot project, and will basically upgrade, consolidate each rig to 8 GPUs and get rid off all risers for 10 rigs in the old ETH farm.
Worst case scenario, no choice but to jiggy-rig a cable to do this off the Delta. I think only 2 pins is required.... but would leave that to experts.
I would like to buy some from you if manage to figure it out. Otherwise, hawkfish can help..... hawk are you there?

@fgm
Yeah for now, just park at NH to reduce risk, I have seen +0.01919740 BTG payment on Coinomi wallet, eventhough I have 11 BTG in Suprnova (still waiting confirmation).
I am growing suspicious everyday about this BTG.... I think the BTG network doesn't have enough hash to keep up.
Once state of pools settles down, BTG mining should be profitable - IMHO.
Btw, NH is not a mining pool, per se.
NH is a buyer/seller marketplace.
We sell hash, and they are buyers out there that will buy our hash.
What they eventually use our hash to mine.... we would not know what coin.
I am sure many of us here who followed my strategy made some nice profit.
I think for now, just mine something else or sell hash at NH.

@phil,
the 2 x D1800s I sent to you earlier, I think my office used a router box to send to you - I guess you can use that size of a box.
Shipping in the US - do you need to use only boxes provided by USPS?

Yup- mining BTG was a crazy experience. All my rigs acted weird and  it took me most the day to get them resolved. Minertopia turned out to be the most stable pool.

I'

Phil, I'm just catching up on emails etc from the last 2 days but am out of my home now. I will respond to your pm later today. I still want the board.

Spotswood  1 unit  paid ready to ship----tracking issued
Marvell2      2 units paid ready to ship----tracking issued
R0mi            1 unit paid  ready to ship ---tracking issued


Jaredkragen  1 unit paid  not ready
crazydane     1 unit paid not ready
vapourminer 1 unit paid  not ready

7 gone

trying to find  some more packing boxes  as these boards are odd shaped.

I have these on order since last week

I got one of these boards on the way too.  Should be here early next week.  I will be powering it with a Delta 2400W.

I figured I'd start by connecting all the 6 pin IN connectors to the Delta, then see if it will post with some crappy $25 GT 720 GPU I got laying around.  If not, I'll check for 12V on the 4 pin OUT connector, and if I see it, make a cable to feed the 4 pin IN connector by the CPU.  If it still won't post at this point, I'm not sure what the next step would be.

Also, on all those 6 pin OUT connectors for the GPU's, is there a reason to use those instead of just feeding the GPU's directly from the Delta?  If I was to run 1080Ti's with dual 8 pin connectors, I would definitely want to feed them directly from the PSU and not via Y cables from the mobo!

@citronick took your advice and stood on NH, after the BTG crazy hours everything switched to NH cryptonite. It was much safer than pool mining, right now 6x580 do 12$ and 6x1060 do ~8$.
The 1060 rigs are switching to equihash.

Yes checked the video before. OK think i will try it
Is there a software tool, to configure watercooling pump and the fan? The normal fan on gpu, is normal via afterburner adjustable or?

Thanks!!

both msi and evga


Maybe  maybe not

  did you look at my you tube video's

the sound is accurate.  compare the noise to the asic  in the newer video  the asic is really loud

https://www.youtube.com/channel/UC-K1Sokgy3-4CdV_uZF8ubw?view_as=subscriber

Claymore.

I thought that was power for the fans initially, and a 4 pin cpu male is required from a pico psu.

And also it's weird design, why does a mobo need to be connected to itself with cables lol. Why can't some power from the bunch of 6 pins go directly to cpu via the mobo traces?

Good luck, I'm most interested in this board due to it's compact size compared to the larger one phil has. Will be following your progress.




It boils down to cost. I'm from Hong Kong and Japan's a little closer compared to my farm in Malaysia. If they offer 3 cents electricity, cheap rent and reasonable hardware prices, sure. I like Japan anyways. But for now, I'm not altruistic enough to care whether the electricity comes from renewable sources or not.

cool ill try that pool tonorow, whatminer are you using for  Amd cards btw

Just got the Colorful board with no Colorful "markings"...

It looks like this board needs to have a CPU 4pin and the source for that power comes from the server PSU but via one of the Power-Out (POUTS) at the other side of the motherboard.

I am assuming, I have to get a long 4pin CPU EPS type cable, male to male.

Comments anyone?

Just use the one on github: https://github.com/electroneum/electroneum/releases
Old skool console-based daemon + wallet, but works like a charm.

pool.electroneum.space still working as it should this morning, been accumulating coins nicely since last night.

@nsummy: have you tried cpu-mining from that wallet? It definitely puts my CPU to work when I use the command start_mining, but I haven't yet figured out how to have it display the hashrate...

@philipma1957

How loud are your factory watercooled setups, could you compare these? You have evga and msi or?

Could you adjust fan rpm and watercooling fan rpm? Pump also?

When tuned for effiency, living room possible?