Sixth alt coin thread I forgot to mod last thread. - page 67.

Oakey22

sr. member

Activity: 489

Merit: 322

Quote from: philipma1957 on November 17, 2017, 08:47:23 AM

I am pretty much maxxed for the garage and the solar array.

I also have 3 rigs at my friends office

So at this point in time I need more power.

Buysolar is working on a new array but government paperwork is killing him.

We may just start running via the 400 amp 240 volt at first.

and still waiting for power company to set that up.

it would be 11 -12 cent power until June 1

96000 watts = about 75000 watts for mining.

we would slowly convert it from grid to grid tied into solar.

In the meantime I have 4 more s-9's coming in with no place to run them.

I will be needing about 5600 watts to run them.

Wow that is some power you will be drawing, my electricity is around the same price as that so it gives me confidence to expand.

would you recommend those Onda D1800 motherboards?

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

@phil

just want to confirm: the onda b250 d8p takes ddr4 sodimm?

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

I am pretty much maxxed for the garage and the solar array.

I also have 3 rigs at my friends office

So at this point in time I need more power.

Buysolar is working on a new array but government paperwork is killing him.

We may just start running via the 400 amp 240 volt at first.

and still waiting for power company to set that up.

it would be 11 -12 cent power until June 1

96000 watts = about 75000 watts for mining.

we would slowly convert it from grid to grid tied into solar.

In the meantime I have 4 more s-9's coming in with no place to run them.

I will be needing about 5600 watts to run them.

KaydenC

sr. member

Activity: 610

Merit: 265

https://www.reddit.com/r/nvidia/comments/7cnl41/nvidia_built_the_dgx_saturnv_volta_their_own/dpr73j7/

Volta supercomputer is over 50% more efficient than pascal. There's enough time for cards we buy now to pay off 60-90% of its cost before volta release (assuming late march). After new year I think I will halt expansion till volta releases.

My electrician found a decent warehouse with 500A 3 phrase 415V power. Flying back to malaysia to check it out in a month.

I have a number of brand new and unopened Biostar TB250 BTC + risers I am selling cheap. Anyone interested pm me.

tpd09

full member

Activity: 287

Merit: 100

Quote from: chup on November 17, 2017, 07:22:29 AM

Quote from: philipma1957 on November 17, 2017, 06:53:01 AM

Quote from: tpd09 on November 17, 2017, 04:12:01 AM

Quote from: KaydenC on November 14, 2017, 12:46:11 PM

This seems almost too good to be true: https://www.aliexpress.com/item/Cheap-Mining-Rig-Machine-Antminer-8-NP106-Cards-1600W-ETH-185MH-s-ZEC-2500-Blackchain-Win10/32836106822.html

Prebuilt mining rig sold at cost on aliexpress.

I ordered one today guys - will report back once I receive it

Did you use paypal or some type of protection for the purchase?

Great price if it works out.

My order for 10 more boards has given me tracking maybe monday or tuesday. they will show up.

AliPay is overprotecting buyers. Seller doesn't receive the money until buyer confirms receiving and satisfaction with the product.

didnt use paypal - seller provided me with a tracking number... lets see if all works out well.

chup

sr. member

Activity: 737

Merit: 262

Me, Myself & I

Quote from: philipma1957 on November 17, 2017, 06:53:01 AM

Quote from: tpd09 on November 17, 2017, 04:12:01 AM

Quote from: KaydenC on November 14, 2017, 12:46:11 PM

This seems almost too good to be true: https://www.aliexpress.com/item/Cheap-Mining-Rig-Machine-Antminer-8-NP106-Cards-1600W-ETH-185MH-s-ZEC-2500-Blackchain-Win10/32836106822.html

Prebuilt mining rig sold at cost on aliexpress.

I ordered one today guys - will report back once I receive it

Did you use paypal or some type of protection for the purchase?

Great price if it works out.

My order for 10 more boards has given me tracking maybe monday or tuesday. they will show up.

AliPay is overprotecting buyers. Seller doesn't receive the money until buyer confirms receiving and satisfaction with the product.

chup

sr. member

Activity: 737

Merit: 262

Me, Myself & I

One can lower the price of the rig for cca 40$ if register for cashback with my signature link... Wink

asukahan

newbie

Activity: 17

Merit: 0

I got several D1800s and cases, the stability of the rigs is hugely improved because of no risers.

p.s. if P106-100 is the card you choose to use on ur D1800, you should ask a new bios update from the seller.

kemo6600

member

Activity: 130

Merit: 10

Quote from: philipma1957 on November 17, 2017, 06:53:01 AM

My order for 10 more boards has given me tracking maybe monday or tuesday. they will show up.

My Sample of the new version also shipped and seller confirmed RX GPU support , also quoted me the case for 39$ without fans/fan grills , only problem is shipping cost .

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: tpd09 on November 17, 2017, 04:12:01 AM

Quote from: KaydenC on November 14, 2017, 12:46:11 PM

This seems almost too good to be true: https://www.aliexpress.com/item/Cheap-Mining-Rig-Machine-Antminer-8-NP106-Cards-1600W-ETH-185MH-s-ZEC-2500-Blackchain-Win10/32836106822.html

Prebuilt mining rig sold at cost on aliexpress.

I ordered one today guys - will report back once I receive it

Did you use paypal or some type of protection for the purchase?

Great price if it works out.

My order for 10 more boards has given me tracking maybe monday or tuesday. they will show up.

tpd09

full member

Activity: 287

Merit: 100

Quote from: KaydenC on November 14, 2017, 12:46:11 PM

This seems almost too good to be true: https://www.aliexpress.com/item/Cheap-Mining-Rig-Machine-Antminer-8-NP106-Cards-1600W-ETH-185MH-s-ZEC-2500-Blackchain-Win10/32836106822.html

Prebuilt mining rig sold at cost on aliexpress.

I ordered one today guys - will report back once I receive it

R0mi

full member

Activity: 305

Merit: 148

Theranos Coin - IoT + micro-blood arrays = Moon!

Quote from: QuintLeo on November 16, 2017, 04:48:32 PM

Quote from: dragonmike on November 16, 2017, 10:53:13 AM

Quote from: philipma1957 on November 16, 2017, 10:48:14 AM

Quote from: dragonmike on November 16, 2017, 10:44:12 AM

Quote from: judypug1956 on November 16, 2017, 09:26:46 AM

IT is philipma1957 on cell phone. Are you using six blower style 1080ti?

No, blower style Vega56.

all the same hight correct?

Yup. All Sapphire RX Vega 56.

Fan on top of those cards isn't going to help much unless it's blowing air down at the "blower fan" intake for the cards - in which case it might help some.

if you take the back plate off, a fan on top will help some.

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: MingMining on November 16, 2017, 09:34:02 PM

Quote from: bdiddle on November 16, 2017, 04:21:46 PM

Hey Phil, the Onda D1800 6 slot board uses a DDR3 sodimm, right?
Aliexpress doesn't clarify what it uses.

Thanks!

Yes.

yes it does

the second one of mine is yet to be tested. since I shorted the first one with the molex put in upside down Sad

MingMining

member

Activity: 202

Merit: 10

Eloncoin.org - Mars, here we come!

Quote from: bdiddle on November 16, 2017, 04:21:46 PM

Hey Phil, the Onda D1800 6 slot board uses a DDR3 sodimm, right?
Aliexpress doesn't clarify what it uses.

Thanks!

Yes.

SquigglyBear

newbie

Activity: 7

Merit: 0

Quote from: QuintLeo on November 16, 2017, 04:53:42 PM

Quote from: SquigglyBear on November 16, 2017, 02:40:41 PM

Quote from: QuintLeo on November 15, 2017, 08:11:11 PM

Quote from: SquigglyBear on November 14, 2017, 12:06:52 PM

FYI: GPU0 - 1080 TI, GPU1 - 1070 Mini, GPU2 - 1080 TI (GPU0 & GPU2 are the exact same 1080 TI make/model)

https://www.flickr.com/gp/157030813@N04/X4d99y

You appear to have one of your 1080ti set for a MUCH lower TDP level than the other one.

Hey QuintLeo, thanks for the response. I added a few more pics for you (or anyone) to take a look at. I believe I have power settings set correctly... but as you can see in the Nvidia Powermizer pics, the one card is clocking significantly less.

Also, I added a picture of the GPU stats in the terminal. I notice 2 discrepancies from the bad 1080ti (GPU0), and the good 1080ti (GPU2). Both the memory usage and gpu-util are higher than the others. Does this mean something?

https://www.flickr.com/photos/157030813@N04/

EWBF stats keep showing 2 of your cards using a lot lower power level than the 3'd card - and one of the 1080 ti cards running pretty hot despite the lower TDP than the other one.
Starting to look like a cooling issue preventing the low-TDP card from boosting enough to need more power or hash fast.

You the man QuintLeo, I put a fan on the cards, and they immediately jumped up back to normal. Now getting ~1800 Sol/s with the same 3 cards. Thanks for the tip!

https://www.flickr.com/photos/157030813@N04/38441239072/in/dateposted-public/

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: QuintLeo on November 16, 2017, 04:48:32 PM

Quote from: dragonmike on November 16, 2017, 10:53:13 AM

Quote from: philipma1957 on November 16, 2017, 10:48:14 AM

Quote from: dragonmike on November 16, 2017, 10:44:12 AM

Quote from: judypug1956 on November 16, 2017, 09:26:46 AM

IT is philipma1957 on cell phone. Are you using six blower style 1080ti?

No, blower style Vega56.

all the same hight correct?

Yup. All Sapphire RX Vega 56.

Fan on top of those cards isn't going to help much unless it's blowing air down at the "blower fan" intake for the cards - in which case it might help some.

nope if fan is in front near video ports it pulls a lot of air up and out..all back plates feel hot

and you pull it up and out so the back plate tosses much less hot air at the blower fan it is close to

crazydane

full member

Activity: 558

Merit: 194

I got my mobo as well. Yeah, great job packing it Phil!

Hope to get it fired up tonight. Need to steal an ATX PSU from another rig that I'm switching over to a Delta 2400W. So I'll have to do that first.

I did notice that the slot spacing is wider than the standard 2 x 20.32mm, so I won't be able to water cool using EK quad parallel blocks.

On other words, 2 of these blocks won't work:

So if I water cool, I'll have to use tubing between GPUs instead of blocks.

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: SquigglyBear on November 16, 2017, 02:40:41 PM

Quote from: QuintLeo on November 15, 2017, 08:11:11 PM

Quote from: SquigglyBear on November 14, 2017, 12:06:52 PM

FYI: GPU0 - 1080 TI, GPU1 - 1070 Mini, GPU2 - 1080 TI (GPU0 & GPU2 are the exact same 1080 TI make/model)

https://www.flickr.com/gp/157030813@N04/X4d99y

You appear to have one of your 1080ti set for a MUCH lower TDP level than the other one.

Hey QuintLeo, thanks for the response. I added a few more pics for you (or anyone) to take a look at. I believe I have power settings set correctly... but as you can see in the Nvidia Powermizer pics, the one card is clocking significantly less.

Also, I added a picture of the GPU stats in the terminal. I notice 2 discrepancies from the bad 1080ti (GPU0), and the good 1080ti (GPU2). Both the memory usage and gpu-util are higher than the others. Does this mean something?

https://www.flickr.com/photos/157030813@N04/

EWBF stats keep showing 2 of your cards using a lot lower power level than the 3'd card - and one of the 1080 ti cards running pretty hot despite the lower TDP than the other one.
Starting to look like a cooling issue preventing the low-TDP card from boosting enough to need more power or hash fast.

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: dragonmike on November 16, 2017, 10:53:13 AM

Quote from: philipma1957 on November 16, 2017, 10:48:14 AM

Quote from: dragonmike on November 16, 2017, 10:44:12 AM

Quote from: judypug1956 on November 16, 2017, 09:26:46 AM

IT is philipma1957 on cell phone. Are you using six blower style 1080ti?

No, blower style Vega56.

all the same hight correct?

Yup. All Sapphire RX Vega 56.

Fan on top of those cards isn't going to help much unless it's blowing air down at the "blower fan" intake for the cards - in which case it might help some.

bdiddle

member

Activity: 75

Merit: 10

Hey Phil, the Onda D1800 6 slot board uses a DDR3 sodimm, right?
Aliexpress doesn't clarify what it uses.

Thanks!

Topic: Sixth alt coin thread I forgot to mod last thread. - page 67. (Read 80196 times)