Author

Topic: 💥SOLARIS XLR💥100% PoS + Masternodes ⚡Zerocoin⚡txbit.io in development - page 281. (Read 309009 times)

copper member
Activity: 1024
Merit: 513
txbit.io - cryptocurrency exchange
What's the latest on the masternodes issue? Payments are incredibly infrequent for having so few nodes online. In addition, the XLR being received is sometimes 0.02 instead of 0.4 as stated in the spec. Pretty disappointing for an MN owner looking to get in early.

If you had read the previous post you could have known that masternode payment enforcement will be enabled very soon. We could not enable it from start because we started with zero masternodes.

There is nothing wrong with the network. Miners are just not paying masternode rewards. They can do that because masternode payment enforcement is not yet enabled. It will be enabled by us in the next days.

And what is the reason for that? There is no incentive for the early MNs...

Because when we started there were no masternodes. So we cannot enforce something that does not happen. Now that we have enough masternodes we can enable it. Its just how it technically works.
full member
Activity: 123
Merit: 100
What's the latest on the masternodes issue? Payments are incredibly infrequent for having so few nodes online. In addition, the XLR being received is sometimes 0.02 instead of 0.4 as stated in the spec. Pretty disappointing for an MN owner looking to get in early.
full member
Activity: 185
Merit: 100




Dev
Any ETA on new wallet update?

You need to open mn ports for us to run more than 1 node pr ip.


Currently there isnt enough nodes running to soak up the block rewards even.


No need to speculate about this. It is possible to run multiple masternodes on a single IP adres.

Just reuse the same port for all entries.

Thank you for your support !

What?
But it needs to be connectable from the outside.
Router cant forward 1 port to multiple adresses.

Neither can u start more than 1 progam using the same port.
Instance 2 gets "could not bind port 60020"

Thats why you dont see ANYONE run 2 from same ip.
We tried yesterday, as you saw in the list. But running more than 1 will become invalid and never go from 0:00:00 active.  (also ban)

Look at the current masternode list. Do you see any duplicate IP address? Yes you do... so... its possible. Just reuse the same port for each entry in masternode conf.



Actually, there are no duplicate WORKING nodes.

And look at the list right now.
Mr 86.88.39.133 proves my point.
3 nodes... 1 active.


Now he is trying 4. But as we see... only 1 accepted.



[/quote

That duplicate nodes are mine .
yesterday i started them and  on a certain moment i also got rewards on all the masternodes i see when i got home.
but only one was enabled  and was counting
rest was missing .
today i had 5 nodes trying and i only had one reward  on my first masternode nothing and that was the only one that was enabled.

but if it is possible dev says  that it must work  then i keep it likes this and we will see when effectively masternodes payments will be enforced.


sr. member
Activity: 687
Merit: 291
@SolarisDev

I didn't get your responce how I should update stratum ? I don't know


We are not miners and we do not have knowledge of specific mining software.

Thanks
copper member
Activity: 1024
Merit: 513
txbit.io - cryptocurrency exchange
@dev: please add the masternode payment fix as Kees de Wit is doing for Amsterdamcoin (Update spork and alert key commit)

https://github.com/CoinProjects/AmsterdamCoin-v4

This will prevent too low payments for the masternode owners.

I am sure Kees is willing to explain it more in detail as he was answering stuff in this thread as well. Thanks!  Cool


I will enable the enforcement date today. Effectively masternode payments will be enforced from October 13.
newbie
Activity: 3
Merit: 0
Hi Guys
I just heard that XLR is being delisted from Cryptopia - can somebody tell me how I can undertake a coinswap? All my coins are stored on the exchange

You should still be able to withdraw the coins to an old Solaris Wallet. After that, you can swap them to new coins on this website: https://solaris.swapyourcoins.today

Oh, so I can't send the coins from the exchange to the new wallet?
https://solaris.swapyourcoins.today/ seems to suggest I should be getting an address from the new wallet? - not sure
sorry, I'm quite noob

Edit: Searched this thread and from what I gather:
1. Install NEW wallet
2. Get new address from NEW wallet
3. Paste new address into https://solaris.swapyourcoins.today/
4. Copy address provided by website
5. Send from Cryptopia directly to address provided by website (from step 4)

CAN SOMEONE PLEASE CONFIRM WHETHER THESE STEPS ARE CORRECT? THANK YOU



that is right, i did similar thing. sent to the swap website directly from exchange

Thanks - worked well!

Edit: I do believe there should be clearer instructions on the website though.
newbie
Activity: 43
Merit: 0
List of all the new xlr algo pools that i know of.

http://pool.denarius.name/
https://umine.org/
https://cryptohub.online/pools/
https://pool.minertopia.org/
http://newcoin.sopool.us/ -*(SCAM-NO PAYOUT)*

I think that's it for now. Did i miss any?
sr. member
Activity: 1092
Merit: 273
KonsolTurk  SGMiner for xevan can't detect stratum dif properly.  to resolve the problem you should launch with param   --difficulty-multiplier 0.0039



CryptoHub Pool notify


I wait for devs responce how I should configure my pool to proper masternodes reward! I didn't upgrade wallet on my pool yet.

CryptoHub has more than 80% of net hashrate for now. We need more pools for xlr-xevan


thanks for fast reply,  
but i'm still having problem i added this to my bat now it gives
[16:03:31] Option difficulty-multiplier is deprecated and will be removed in v5.1. Pools that need this option should fix their setup

could you publish a working config file?


yes it shows that error but works.  I don't know how fix my pool,  I set algo multiplier 24,  cpuminer and ccminer detects it,  only sgminer does not

That is my sg.bat

Quote
sgminer.exe -k xevan -o stratum+tcp://cryptohub.online:3028 -u [email protected] -p x -I 16 --gpu-platform 2 --difficulty-multiplier 0.0039
pause
newbie
Activity: 76
Merit: 0
KonsolTurk  SGMiner for xevan can't detect stratum dif properly.  to resolve the problem you should launch with param   --difficulty-multiplier 0.0039



CryptoHub Pool notify


I wait for devs responce how I should configure my pool to proper masternodes reward! I didn't upgrade wallet on my pool yet.

CryptoHub has more than 80% of net hashrate for now. We need more pools for xlr-xevan


thanks for fast reply,  
but i'm still having problem i added this to my bat now it gives
[16:03:31] Option difficulty-multiplier is deprecated and will be removed in v5.1. Pools that need this option should fix their setup

could you publish a working config file?
sr. member
Activity: 1092
Merit: 273
@SolarisDev

I didn't get your responce how I should update stratum ? I don't know
newbie
Activity: 44
Merit: 0
I'm very glad that XLR will be on coinexchange soon. And I will wait for greater exchange as saying.
sr. member
Activity: 687
Merit: 291
Looks like the pools not setting masternode rewards or update wallets or they must be setting on wallet or on the network?

Yesterday I sent PM  message to Solaris Xevan pool owners  that we need them to:

- Update the wallet to v2.0.1.0
- Prepare for masternode payment enforcement (include proper masternode rewards)




Thank you for your support
hero member
Activity: 1414
Merit: 516
Looks like the pools not setting masternode rewards or update wallets or they must be setting on wallet or on the network?
hero member
Activity: 742
Merit: 505




Dev
Any ETA on new wallet update?

You need to open mn ports for us to run more than 1 node pr ip.


Currently there isnt enough nodes running to soak up the block rewards even.


No need to speculate about this. It is possible to run multiple masternodes on a single IP adres.

Just reuse the same port for all entries.

Thank you for your support !

What?
But it needs to be connectable from the outside.
Router cant forward 1 port to multiple adresses.

Neither can u start more than 1 progam using the same port.
Instance 2 gets "could not bind port 60020"

Thats why you dont see ANYONE run 2 from same ip.
We tried yesterday, as you saw in the list. But running more than 1 will become invalid and never go from 0:00:00 active.  (also ban)

Look at the current masternode list. Do you see any duplicate IP address? Yes you do... so... its possible. Just reuse the same port for each entry in masternode conf.



Actually, there are no duplicate WORKING nodes.

And look at the list right now.
Mr 86.88.39.133 proves my point.
3 nodes... 1 active.


Now he is trying 4. But as we see... only 1 accepted.


Hi Dev.
Hope you've had time to realize im correct here Smiley

The number of masternodes is unhealthy low and it seems like 70%+ of all blocks are pow only.

Fix the locked port number and you'd probably see x2 nodes very fast.

This also motivates people to buy more than just 1k.
sr. member
Activity: 336
Merit: 258
@dev: please add the masternode payment fix as Kees de Wit is doing for Amsterdamcoin (Update spork and alert key commit)

https://github.com/CoinProjects/AmsterdamCoin-v4

This will prevent too low payments for the masternode owners.

I am sure Kees is willing to explain it more in detail as he was answering stuff in this thread as well. Thanks!  Cool
sr. member
Activity: 687
Merit: 291
When xlr_xevan will be on exchange?





We got a message from CoinExchange regarding a swap :

Quote
I have had very little time lately . We are upgrading the system at the moment. So unfortunately cannot commit to doing the swap at least for the next week.

Then we asked him if its ok to contact him after next week and he agreed.

In the meantime, I sent a query to Novaexchange  with request to add Solaris with Xevan algorithm to their  voting list .

I got a message from NovaExchange support team :

Quote
Hi

At the moment we do not accept the listing of any new coins. Please be patient until we do again.

Regards,
NovaExchange support team

We hope that Coinexchange.io  will swap Nist5 to Xevan in the next week.   Then we can try apply for bigger exchange.

Thanks for your support!


member
Activity: 140
Merit: 12
hello, bought solaris on coinexchage.io, do i need to undergo the swap process too? thanks.

Yes the ones currently on coinexchange are the old (Nist5) ones , So you will need to swap them for the new ones.
full member
Activity: 376
Merit: 103
When xlr_xevan will be on exchange?
full member
Activity: 476
Merit: 100
maybe to buy a very expensive trade and we will sell it at a very cheap price it will kill us in selling and we have to be careful until now.
full member
Activity: 266
Merit: 100
Next-Gen Blockchain Ecosystem - Luxcore.io
local wallet open get error ,
cant found the block data, and direct force close .
Jump to: