[SOLD OUT] ASICMiner 49 port hubs - .25 BTC - Free Shipping - page 5.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

at bitterdog this is running off a hi end asus maximus mobo left over from all my gpu rigs. (it is a 1k pc)

I have 3 pc's left from the 13 I ran gpu rigs with. two in the photo and one in another room. you can also see the 20 port hub to the left of the 49 port hub

last set

current bitminter mining

the 20 hub plus the 49 port . I think I have it at 19 of 20 ports and 46 of 49 ports. 4 fans.

the grand total power of 301 watts. I want to add a second 49 port to this rig if I can.

I would be at about 450-460 watts and about 111 sticks

bitterdog

hero member

Activity: 728

Merit: 503

dApps Development Automation Platform

Phil you have a RAS PI?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Some more photos

see silverstone filter stops short issues

psu is 163 at the plug it is doing 46 sticks 1 usb fan and 3 x 12 volt fans from the other wire

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Hold a second set for me.

here are some photos

Photos

second shot

third shot

Dagger75

full member

Activity: 156

Merit: 100

Quote from: CrazyGuy on October 28, 2013, 10:00:28 PM

Quote from: Dagger75 on October 28, 2013, 09:33:56 PM

I'm in for 1 if they're available now please. What address for BTC and total is 1.82BTC correct? Thanks!

I've got 3 left that I can send with sticks.

Sounds good, I'll take one then. Send to address listed at start of thread?

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: conairlines on October 28, 2013, 09:55:21 PM

This is a good & cheap option for power, 32amps at 5v, I bought one for my pc build a couple weeks ago from here:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=151146545085&ssPageName=STRK:MESE:IT

Are these back in stock yet? I'd like to purchase one.

that's an awesome PSU for this purpose... (based on listed specs and price)

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Quote from: Dagger75 on October 28, 2013, 09:33:56 PM

I'm in for 1 if they're available now please. What address for BTC and total is 1.82BTC correct? Thanks!

I've got 3 left that I can send with sticks.

conairlines

newbie

Activity: 14

Merit: 0

This is a good & cheap option for power, 32amps at 5v, I bought one for my pc build a couple weeks ago from here:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=151146545085&ssPageName=STRK:MESE:IT

Are these back in stock yet? I'd like to purchase one.

bitterdog

hero member

Activity: 728

Merit: 503

dApps Development Automation Platform

Anyone know if a Rasperry PI will run this?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: CrazyGuy on October 28, 2013, 08:55:22 PM

Quote from: CanaryInTheMine on October 28, 2013, 08:47:51 PM

I've got all 49 hashing using that PSU I found at Frys...

I decided to keep one with this batch for testing as well. I've got a few PSUs I'll be testing and will provide updates on what I find. I've got to say, I like your idea of stacking them with spacers and I look forward to seeing some of the rigs you guys build.

I sent a pm to you about surplus PSU with 36 amp 5 volt rating .

Dagger75

full member

Activity: 156

Merit: 100

I'm in for 1 if they're available now please. What address for BTC and total is 1.82BTC correct? Thanks!

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Quote from: anw on October 28, 2013, 08:52:34 PM

How much for 1 hub + 50 sticks with express delivery to France?
Thanks

USA only for the time being, sorry.

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Quote from: CanaryInTheMine on October 28, 2013, 08:47:51 PM

I've got all 49 hashing using that PSU I found at Frys...

I decided to keep one with this batch for testing as well. I've got a few PSUs I'll be testing and will provide updates on what I find. I've got to say, I like your idea of stacking them with spacers and I look forward to seeing some of the rigs you guys build.

anw

member

Activity: 76

Merit: 10

How much for 1 hub + 50 sticks with express delivery to France?
Thanks

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

I've got all 49 hashing using that PSU I found at Frys...

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

I have 45 sticks running on this psu.

http://www.amazon.com/NZXT-Hale82-Bronze-Modular-Supply/dp/B006I2H05M

and 2x 12 volt fans. I used the 4 pin out wire from the NZXT to run the fans. the psu is running 45 sticks and 2 thermaltake usb fans

http://www.amazon.com/Thermaltake-Mobile-External-Cooling-AF0007/dp/B002OJN250/ref=sr_1_2?s=electronics&ie=UTF8&qid=1383008019&sr=1-2&keywords=thermaltake+usb+fans

The kill a watt reads 159 watts for this hub and 4 fans. So I am probably right on the line of what this psu can do. I will run it over nite.

http://www.tweaktown.com/reviews/4758/nzxt_hale82_n_650_watt_power_supply_review/index.html

this review is the non modular one I have the modular one my 5 volt rating is for 25a.

the none modular rating is for 28a. they may be the same unit with different ratings. IE this may just be 28a even though it reads 25a.

any how what I really like about this is it is a small hub, you can cool it with 2x 12 volt 120 mm fans and 2 plastic grills.

http://www.amazon.com/SilverStone-120mm-Filter-Grill-FF121/dp/B0036WTDHK/ref=sr_1_1?ie=UTF8&qid=1383008952&sr=8-1&keywords=fan+grill+120mm+plastic

use 2 of these to prevent shorts or damage to the sticks.

attach them to your fans lay the grill right on the stick tops. have the fans blow right up to the ceiling. seems to work.

bitterdog

hero member

Activity: 728

Merit: 503

dApps Development Automation Platform

FYI the wire gauge on this power supply is 21AWG it is not warm at all

35 are running off of this bestec cheapo now.

Make sure you have the BE seated firmly all the way in the hub

Power Supply Im using is

http://www.amazon.com/eMachine-Bestec-ATX-300-12E-Power-Supply/dp/B000J657XA/ref=sr_1_1?s=electronics&ie=UTF8&qid=1383008737&sr=1-1&keywords=bestec+atx-300-12e

bitterdog

hero member

Activity: 728

Merit: 503

dApps Development Automation Platform

32 running off this cheapo bestec PSU 5V 30A
.... I sold the other ones off before I tested =/
Been running 20 mins

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: CrazyGuy on October 28, 2013, 05:35:07 PM

Quote from: philipma1957 on October 28, 2013, 05:08:11 PM

got mine today . having a few issues but 34 ports work fine. right now I am using a 225 usd sea sonic platinum 1000 watt psu. running 34 ports . I am pulling 117 watts at the wall . not surprised as 34 x 2.5 = 85 watts divide by 70 percent you get 121 watts. so my efficiency is in the 70's

near as I can figure my hub has 2 bad banks row 8- 14 and row 15-21 are powered but do not detect the hubs. 1 lone port does not work in bank 42-49

hard to tell why. one thing for sure it is a nice size for am sticks . you can use just 2 fans to cool it.

I will test more psu's as I would like to find the best one. for running 34 sticks.

it also may be that running this hub on a different pc will allow more then 34 sticks

Is it powering the units and your controller is just not recognizing them? Try isolating the two banks in question and unplugging all other units.

I got it to work on a different pc. right now I am running 44 sticks using a Nzxt psu a 650 watt model rated for 5 v

25 amp. I am also using the four pin 12 volt cable to run a pair of 12 volt fans. total power at the wall is 159 watts for 44 sticks and 2 fans. seems to be a decent piece of gear.

but it may vary from pc to pc. I am going to run more tests and post later today and tommorow. On wed. thurs I get 2 surplus 20 dollar psu's.. if they work I will give links to buy them.

CrazyGuy

legendary

Activity: 1973

Merit: 1007

Quote from: philipma1957 on October 28, 2013, 05:08:11 PM

got mine today . having a few issues but 34 ports work fine. right now I am using a 225 usd sea sonic platinum 1000 watt psu. running 34 ports . I am pulling 117 watts at the wall . not surprised as 34 x 2.5 = 85 watts divide by 70 percent you get 121 watts. so my efficiency is in the 70's

near as I can figure my hub has 2 bad banks row 8- 14 and row 15-21 are powered but do not detect the hubs. 1 lone port does not work in bank 42-49

hard to tell why. one thing for sure it is a nice size for am sticks . you can use just 2 fans to cool it.

I will test more psu's as I would like to find the best one. for running 34 sticks.

it also may be that running this hub on a different pc will allow more then 34 sticks

Is it powering the units and your controller is just not recognizing them? Try isolating the two banks in question and unplugging all other units.

Topic: [SOLD OUT] ASICMiner 49 port hubs - .25 BTC - Free Shipping - page 5. (Read 14468 times)