Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 148. (Read 237247 times)

hello - any chance to implement cn-web algo? (webchain coin)

v1.6.8 with v8 support in about 5-7 days if everything goes as planned

Any updates on v8 support?  I’m having trouble find solid info on support from the various miners.

Thx!

ViWe,
Thanks for the response.  The problem, interestingly, was bad timings on one of the video cards.  Surprised me because it was generating good numbers, no errors, no bad shares.  Everything working find now.

Whether or not this is a hardware issue I do not know, just can state that I regularly close the miner (both with Ctrl-C and closing the window) and have never had a subsequent system crash.

My friend send me this, 580 rig srb+haven
WTF?
https://a.radikal.ru/a22/1810/38/fce7f1fee06e.jpg

Please share your bios for XFX RX 570 4GB Elpida with us.

Thanks for the answer.

how to close the automatic menu?

These commands do not help:

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Windows Error Reporting]
"DontShowUI"=dword:00000001


Clicking on OK, Mining starts.

You can edit the premade multi algo configurations just like you can edit the mono-algo configuration, and set individual gpu's differently. Check out the readme.

Hi dok... miner is running great. very stable.

I have mix of gpus in my rig ... i have Rx vega56&64 + i have 1 vega frontier edition.

Problem with algo switching mining:

Rx vegas run on intensity 56 or 57 for heavy algo or bittube which give me 1570h/s

where as for Vega FE can run on more intensities,like 96 which gives you 2000+ h/s for heavy algo.

Now in algo switching scenario if i add 56 intensity in my config file then my VEGA FE gets lower hash rate.
 
in next update can you manage individual gpu intensity for multi algo mining ?

Hope i there is a way.

Thanks

Updated from 1.6.5 to V1.6.7, last AMD drivers (16.9.2).

SPN+ 470/8 same hashrate (940) but... SPN+ VEGA64 +100 H/s (from 2060 to 2160).

Same config/wattage. I am happy  . Good work.

I am also using Clayconn. Also good software.

EDIT: Monero "normalv7" hashrates 

With the commision it is clear, if you checked - ok.


These errors come from the mine, which is on a specific IP address and they are on all farms.
And all these mistakes began only today. Before that, for example, everything worked well.

On farms there are no antiviruses, firewalls. Auto-update is disabled everywhere.

The hang of the network equipment is discarded, since there expensive cisco

Is it possible to take ban on your pools because of the big number from one IP? or ///
Can you have any recommendations for starting in the miner cycle?

Is anyone having problems with the latest AMD drivers ? I have seen around 5-8% decrease in both CN Heavy and ETH even! Who has upgraded from here?

check your firewall/antivirus software is not blocking the miner.
For example i had a user report to me that on zone alarm even if he allowed miner connections, sometimes it blocked them.

I have a few rigs running 24h since i begun to develop the miner, on different coins, and never had it trigger the let's call it 'devfee blocking protection' mechanism.
No antivirus, no firewall and defender disabled on all those machines. Some are win7, some are win10.

Fee is 0.85%, not 2.5%
Fee mining period is never more than a minute. Also its calculated so that it is always around 0.85%/24h.

You can freely run a network sniffer to check it out.

Doc, greetings!!

I have two questions:

1. Today, faced with a large number of self-closing miner!
Here's the error ...
[2018-09-28 19:43:29] pool_have_job: Pool sent a new job (ID: 343197983146868)
[2018-09-28 19:43:54] devfee: Could not connect to a devfee pool for a long time!
[2018-09-28 19:43:54] devfee: Tried few pools, but none of them could be connected, so you are probably blocking them.
[2018-09-28 19:43:54] devfee: Don't be a dick.
[2018-09-28 19:43:54] Stopping miner process

+

[2018-09-28 19:55:20] pool_have_job: Pool sent a new job (ID: 136675056484402)
[2018-09-28 19:55:52] devfee: Could not connect to a devfee pool for a long time!
[2018-09-28 19:55:52] devfee: Tried few pools, but none of them could be connected, so you are probably blocking them.
[2018-09-28 19:55:52] devfee: Don't be a dick.
[2018-09-28 19:55:52] Stopping miner process
 

 

Doc, can you please explain what it is?
And why do you write "Don't be a dick."  

2. And I noticed that the work for you is 1.5 minutes. Logs i can include if u need!
It's an hour, right? If yes - then your commission is 2.5%, not 0.85 !!!

The miner runs great, but I have one serious problem.  When I close the miner (CTRL-C), it crashes the system (Win10) hard, and I have to manually reboot twice to get things going again.  The same thing happens if I close the window.  Do you think this is a configuration problem or a wonky hardware issue?  Any help is greatly appreciated.

Very good result with 18.5.2 drivers:
9810-9830 hashes on heaven protocol. No crashes, +10 or -10 hashrate flow.
1st 3cards is rx580-8, last 4cards-vega56 air ref
18.6.1-2 drivers is weird shit, always downhashing.
https://prnt.sc/kzuufi

config miner:
{
"cryptonight_type" : "haven",
"intensity" : 0,
"double_threads" : true,
"min_rig_speed" : 8500,

"gpu_conf" :
[
   { "id" : 0, "intensity" : 58, "worksize" : 8, "threads" : 2},
        { "id" : 1, "intensity" : 58, "worksize" : 8, "threads" : 2},
   { "id" : 2, "intensity" : 58, "worksize" : 8, "threads" : 2},
   { "id" : 3, "intensity" : 61, "worksize" : 9, "threads" : 2},
   { "id" : 4, "intensity" : 61, "worksize" : 9, "threads" : 2},
        { "id" : 5, "intensity" : 61, "worksize" : 9, "threads" : 2},
          { "id" : 6, "intensity" : 61, "worksize" : 9, "threads" : 2}
]
}

config overdriven:

[Profile_0]
Name=Vega56
GPU_P0=852;800
GPU_P1=991;900
GPU_P2=1138;950
GPU_P3=1269;1000
GPU_P4=1312;1050
GPU_P5=1474;1100
GPU_P6=1312;950
GPU_P7=1474;950
Mem_P0=167;800
Mem_P1=500;800
Mem_P2=700;900
Mem_P3=945;950
Fan_Min=3000
Fan_Max=4900
Fan_Target=50
Fan_Acoustic=2400
Power_Temp=55
Power_Target=-10

[Profile_2]
Name=RX580
GPU_P0=300;750
GPU_P1=600;769
GPU_P2=900;887
GPU_P3=1201;1162
GPU_P4=1274;1150
GPU_P5=1318;1150
GPU_P6=1363;1100
GPU_P7=1420;1100
Mem_P0=300;750
Mem_P1=1000;800
Mem_P2=2130;950
Fan_Min=2000
Fan_Max=3500
Fan_Target=55
Fan_Acoustic=2400
Power_Temp=60
Power_Target=-10

I remember renaming the pre-built binary folder or something along the lines to let it build.

Hi guys.

I have a problem. " received data is larger than buffer "

How can i fix this?


http://prntscr.com/kzs2ps