Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 30. (Read 237261 times)

You are right, after the big networking code rewrite, i forgot to test every option, and this one isn't working as its supposed to.
Going to fix in next release, thanks for reporting.

As a workaround increase "job_timeout" for example to 1 hour (3600 sec)

Hey. On one rig srb issues a message "Job timeout detected, reconnecting the pool". This condition can last for hours and the reconnect does not pass. In this case, the cards are under 100% load , srb writes that the shares, but in fact the pool does not receive them.
Windows 10, SRB 1.8.6, moneroocean
https://i.ibb.co/rxFZdKd/timeout.jpg

Use the benchmark alogs feature in the mining software

Just realized (from the log) that I had to run the bat file as an administrator to get tweaking enabled. Did that and it seems to work now. Thanks.

@doktor - Any reason to upgrade from 1.8.3 to this latest version if I'm using RX4 & 5 series cards?

how to test new upx2 algo  before fork?

upd
test on testnet. +10-12% power because v8 algo based

hi dok, i have some rigs w vegas 64&56, and when i use srb i have 10-20% of rejects 0_o , and with the same overclock settings, nothing changed, using trm i have only ~3% as i can see in stats... cant understand this thing...how it can be, what i'm doing wrong?)
and i can see it by profit, cause i'm using nicehash, and i get smaller profit using srb with that too many rejects...

UPX2 is it a smaller scratchpad again, is it lighter than pico?

Try maybe changing the value for fragments.
What does your config looks like?

Try renaming the cache file from v182 that works for you to 186 like :

g1CNV4w168f4hm3_182.srb to g1CNV4w168f4hm3_186.srb

I just tried and 182 kernel works on 186

Recommended drivers:
Adrenalin 18.5.1
Adrenalin 18.6.1
Adrenalin 2019

So the reccomended driver is also Adrenaline 2019? Which version?

Are there any new improvements for RX 570/560/550?

hello,

i got little problem here.On 1.8.2 everything works fine.i got 6xvega 64 ref on 18.6.1 and its about 2020h/s per card.On 1.8.5 miner only half of my vegas get tweak boost..all card have same clocks.i try everything new drivers,ddu etc...

there is a log and u can see tweak profile is applied on all cards.thx for help

https://imgur.com/a/DpPlkkx

[2019-04-25 19:10:14] Startup monitor attached
[2019-04-25 19:10:14] Miner version: 1.8.6
[2019-04-25 19:10:14] Windows version: 10.0 build 15063
[2019-04-25 19:10:14] Video driver version: 24.20.11021.1000
[2019-04-25 19:10:45] AMD Platform ID: 0
[2019-04-25 19:10:45] AMD platform FOUND
[2019-04-25 19:10:45] Found 6 AMD devices
[2019-04-25 19:10:45] CPU AES-NI: FALSE
[2019-04-25 19:10:45] PREPARE DATA: FALSE
[2019-04-25 19:10:45] GPU0: Radeon RX Vega [gfx900] [8176 MB][I: 120.0][W: 16][T: 2][F: 4][BUS: 3]
[2019-04-25 19:10:45] GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 120.0][W: 16][T: 2][F: 4][BUS: 12]
[2019-04-25 19:10:45] GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 120.0][W: 16][T: 2][F: 4][BUS: 15]
[2019-04-25 19:10:45] GPU3: Radeon RX Vega [gfx900] [8176 MB][I: 120.0][W: 16][T: 2][F: 4][BUS: 9]
[2019-04-25 19:10:45] GPU4: Radeon RX Vega [gfx900] [8176 MB][I: 120.0][W: 16][T: 2][F: 4][BUS: 18]
[2019-04-25 19:10:45] GPU5: Radeon RX Vega [gfx900] [8176 MB][I: 120.0][W: 16][T: 2][F: 4][BUS: 6]
[2019-04-25 19:10:45] ADL is enabled
[2019-04-25 19:10:45] Algorithm: Cryptonight V4 (R)
[2019-04-25 19:10:45] Algo switching: disabled
[2019-04-25 19:10:45] Coin forking: disabled
[2019-04-25 19:10:45] Gpu watchdog: enabled [normal mode]
[2019-04-25 19:10:45] Startup monitor: enabled
[2019-04-25 19:10:45] Tweaking: enabled
[2019-04-25 19:10:45] Socket initialiasation done
[2019-04-25 19:10:45] Starting init of gpu threads
[2019-04-25 19:10:45] Created OCL context
[2019-04-25 19:10:45] Using fragments 4 for DeviceID 0 (Thread 0)
[2019-04-25 19:10:45] Using heavy_mode 3 for DeviceID 0 (Thread 0)
[2019-04-25 19:10:45] Using thread_delay 319 for DeviceID 0 (Thread 0)
[2019-04-25 19:10:46] Created OCL input buffer for DeviceID 0 (Thread 0)
[2019-04-25 19:10:46] Loading [normalv4] kernel for DEVICE BUS_ID[3]
[2019-04-25 19:10:46] ctx->Program for DeviceID 0 (Thread 0) loaded
[2019-04-25 19:10:46] Using fragments 4 for DeviceID 0 (Thread 1)
[2019-04-25 19:10:46] Using heavy_mode 3 for DeviceID 0 (Thread 1)
[2019-04-25 19:10:46] Using thread_delay 319 for DeviceID 0 (Thread 1)
[2019-04-25 19:10:46] Created OCL input buffer for DeviceID 0 (Thread 1)
[2019-04-25 19:10:46] Loading [normalv4] kernel for DEVICE BUS_ID[3]
[2019-04-25 19:10:46] ctx->Program for DeviceID 0 (Thread 1) loaded
[2019-04-25 19:10:46] Using fragments 4 for DeviceID 1 (Thread 2)
[2019-04-25 19:10:46] Using heavy_mode 3 for DeviceID 1 (Thread 2)
[2019-04-25 19:10:46] Using thread_delay 319 for DeviceID 1 (Thread 2)
[2019-04-25 19:10:46] Created OCL input buffer for DeviceID 1 (Thread 2)
[2019-04-25 19:10:46] Loading [normalv4] kernel for DEVICE BUS_ID[12]
[2019-04-25 19:10:46] ctx->Program for DeviceID 1 (Thread 2) loaded
[2019-04-25 19:10:46] Using fragments 4 for DeviceID 1 (Thread 3)
[2019-04-25 19:10:46] Using heavy_mode 3 for DeviceID 1 (Thread 3)
[2019-04-25 19:10:46] Using thread_delay 319 for DeviceID 1 (Thread 3)
[2019-04-25 19:10:46] Created OCL input buffer for DeviceID 1 (Thread 3)
[2019-04-25 19:10:46] Loading [normalv4] kernel for DEVICE BUS_ID[12]
[2019-04-25 19:10:46] ctx->Program for DeviceID 1 (Thread 3) loaded
[2019-04-25 19:10:46] Using fragments 4 for DeviceID 2 (Thread 4)
[2019-04-25 19:10:46] Using heavy_mode 3 for DeviceID 2 (Thread 4)
[2019-04-25 19:10:46] Using thread_delay 319 for DeviceID 2 (Thread 4)
[2019-04-25 19:10:46] Created OCL input buffer for DeviceID 2 (Thread 4)
[2019-04-25 19:10:46] Loading [normalv4] kernel for DEVICE BUS_ID[15]
[2019-04-25 19:10:46] ctx->Program for DeviceID 2 (Thread 4) loaded
[2019-04-25 19:10:46] Using fragments 4 for DeviceID 2 (Thread 5)
[2019-04-25 19:10:46] Using heavy_mode 3 for DeviceID 2 (Thread 5)
[2019-04-25 19:10:46] Using thread_delay 319 for DeviceID 2 (Thread 5)
[2019-04-25 19:10:46] Created OCL input buffer for DeviceID 2 (Thread 5)
[2019-04-25 19:10:47] Loading [normalv4] kernel for DEVICE BUS_ID[15]
[2019-04-25 19:10:47] ctx->Program for DeviceID 2 (Thread 5) loaded
[2019-04-25 19:10:47] Using fragments 4 for DeviceID 3 (Thread 6)
[2019-04-25 19:10:47] Using heavy_mode 3 for DeviceID 3 (Thread 6)
[2019-04-25 19:10:47] Using thread_delay 319 for DeviceID 3 (Thread 6)
[2019-04-25 19:10:47] Created OCL input buffer for DeviceID 3 (Thread 6)
[2019-04-25 19:10:47] Loading [normalv4] kernel for DEVICE BUS_ID[9]
[2019-04-25 19:10:47] ctx->Program for DeviceID 3 (Thread 6) loaded
[2019-04-25 19:10:47] Using fragments 4 for DeviceID 3 (Thread 7)
[2019-04-25 19:10:47] Using heavy_mode 3 for DeviceID 3 (Thread 7)
[2019-04-25 19:10:47] Using thread_delay 319 for DeviceID 3 (Thread 7)
[2019-04-25 19:10:47] Created OCL input buffer for DeviceID 3 (Thread 7)
[2019-04-25 19:10:47] Loading [normalv4] kernel for DEVICE BUS_ID[9]
[2019-04-25 19:10:47] ctx->Program for DeviceID 3 (Thread 7) loaded
[2019-04-25 19:10:47] Using fragments 4 for DeviceID 4 (Thread
[2019-04-25 19:10:47] Using heavy_mode 3 for DeviceID 4 (Thread
[2019-04-25 19:10:47] Using thread_delay 319 for DeviceID 4 (Thread
[2019-04-25 19:10:47] Created OCL input buffer for DeviceID 4 (Thread
[2019-04-25 19:10:47] Loading [normalv4] kernel for DEVICE BUS_ID[18]
[2019-04-25 19:10:47] ctx->Program for DeviceID 4 (Thread loaded
[2019-04-25 19:10:47] Using fragments 4 for DeviceID 4 (Thread 9)
[2019-04-25 19:10:47] Using heavy_mode 3 for DeviceID 4 (Thread 9)
[2019-04-25 19:10:47] Using thread_delay 319 for DeviceID 4 (Thread 9)
[2019-04-25 19:10:47] Created OCL input buffer for DeviceID 4 (Thread 9)
[2019-04-25 19:10:47] Loading [normalv4] kernel for DEVICE BUS_ID[18]
[2019-04-25 19:10:47] ctx->Program for DeviceID 4 (Thread 9) loaded
[2019-04-25 19:10:47] Using fragments 4 for DeviceID 5 (Thread 10)
[2019-04-25 19:10:47] Using heavy_mode 3 for DeviceID 5 (Thread 10)
[2019-04-25 19:10:47] Using thread_delay 319 for DeviceID 5 (Thread 10)
[2019-04-25 19:10:47] Created OCL input buffer for DeviceID 5 (Thread 10)
[2019-04-25 19:10:47] Loading [normalv4] kernel for DEVICE BUS_ID[6]
[2019-04-25 19:10:47] ctx->Program for DeviceID 5 (Thread 10) loaded
[2019-04-25 19:10:47] Using fragments 4 for DeviceID 5 (Thread 11)
[2019-04-25 19:10:47] Using heavy_mode 3 for DeviceID 5 (Thread 11)
[2019-04-25 19:10:47] Using thread_delay 319 for DeviceID 5 (Thread 11)
[2019-04-25 19:10:47] Created OCL input buffer for DeviceID 5 (Thread 11)
[2019-04-25 19:10:47] Loading [normalv4] kernel for DEVICE BUS_ID[6]
[2019-04-25 19:10:47] ctx->Program for DeviceID 5 (Thread 11) loaded
[2019-04-25 19:10:48] ADL initialised successfully!
[2019-04-25 19:10:48] Finished init of gpu threads
[2019-04-25 19:10:48] Startup monitor detached
[2019-04-25 19:10:48] Applied tweak profile 10 to device BUS_ID[3]
[2019-04-25 19:10:48] Applied tweak profile 10 to device BUS_ID[12]
[2019-04-25 19:10:48] Applied tweak profile 10 to device BUS_ID[15]
[2019-04-25 19:10:48] Applied tweak profile 10 to device BUS_ID[9]
[2019-04-25 19:10:48] Applied tweak profile 10 to device BUS_ID[18]
[2019-04-25 19:10:48] Applied tweak profile 10 to device BUS_ID[6]
[2019-04-25 19:10:48] Tweaking enabled
[2019-04-25 19:10:48] Gpu watchdog started
[2019-04-25 19:10:48] API disabled
[2019-04-25 19:10:48] json_send[262]: {"id":2,"jsonrpc": "2.0","method":"login","params":{"login":"xxx","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.8.6","rigid":""}}
[2019-04-25 19:10:48] json_receive[294]: {"id":2,"jsonrpc":"2.0","result":{"id":"1","job":{"blob":"0b0b94d487e6058211cc6042725e485805660fd16513ab478a0818fc69fd6f70c6b67c78447bbc0 00000004885540d97634d2fcdee8c60e306b03073dfeae88af6866bd65f0ac4aa54acad0c","job_id":"4609","target":"cf8b0000","height":1820900},"status":"OK"},"error":null}
[2019-04-25 19:10:48] Connected to xmr-eu1.nanopool.org:14444
[2019-04-25 19:10:48] pool_have_job: Pool sent a new job, block height 1820900 [ID: 4609]
[2019-04-25 19:11:15] json_send[176]: {"id":10,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"4609","nonce":"34690080","result":"709e90cadfbad75474e208e452ac45be719c74e10636c1139eb8a6f0cd0e0000"}}
[2019-04-25 19:11:15] json_receive[63]: {"id":10,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2019-04-25 19:11:15] miner_result: GPU3[BUS:9] result 0x80006934 accepted for job[1] [154ms]
[2019-04-25 19:11:15] json_send[176]: {"id":11,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"4609","nonce":"226e0080","result":"221b60e8f1aa5c9ca1db2e257b2750ffa3d141db5db69c8b54f15407957c0000"}}
[2019-04-25 19:11:16] json_receive[63]: {"id":11,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2019-04-25 19:11:16] miner_result: GPU3[BUS:9] result 0x80006E22 accepted for job[1] [183ms]
[2019-04-25 19:11:23] json_send[176]: {"id":12,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"4609","nonce":"095d00c0","result":"f4397509d60ff6d8d216fd1e1a3a4bad0254fa2762556e6daf9bbf9566790000"}}
[2019-04-25 19:11:24] json_receive[63]: {"id":12,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2019-04-25 19:11:24] miner_result: GPU4[BUS:18] result 0xC0005D09 accepted for job[1] [150ms]
[2019-04-25 19:11:24] json_send[176]: {"id":13,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"4609","nonce":"79685515","result":"c4d84d1b7c62b2c4156cb9605287b5c1b4034d1aebd6c6542edad95974400000"}}
[2019-04-25 19:11:24] json_receive[63]: {"id":13,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2019-04-25 19:11:24] miner_result: GPU0[BUS:3] result 0x15556879 accepted for job[1] [169ms]
[2019-04-25 19:11:29] json_send[176]: {"id":14,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"4609","nonce":"b17000c0","result":"14dc8837e6f2f1c5b4b264bed0ba8ca737c8a6cdde88e03e0045583f73210000"}}
[2019-04-25 19:11:29] json_receive[63]: {"id":14,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2019-04-25 19:11:29] miner_result: GPU4[BUS:18] result 0xC00070B1 accepted for job[1] [140ms]
[2019-04-25 19:11:29] hashrate: GPU0: 0 H/s [T:34c][BUS:3]
[2019-04-25 19:11:29] hashrate: GPU1: 2242 H/s [T:37c][BUS:12]
[2019-04-25 19:11:29] hashrate: GPU2: 2022 H/s [T:41c][BUS:15]
[2019-04-25 19:11:29] hashrate: GPU3: 2222 H/s [T:43c][BUS:9]
[2019-04-25 19:11:29] hashrate: GPU4: 2222 H/s [T:42c][BUS:18]
[2019-04-25 19:11:29] hashrate: GPU5: 2027 H/s [T:37c][BUS:6]
[2019-04-25 19:11:29] hashrate: Total: 10735 H/s
[2019-04-25 19:11:33] hashrate: GPU0: 2025 H/s [T:36c][BUS:3]
[2019-04-25 19:11:33] hashrate: GPU1: 2240 H/s [T:37c][BUS:12]
[2019-04-25 19:11:33] hashrate: GPU2: 2020 H/s [T:41c][BUS:15]
[2019-04-25 19:11:33] hashrate: GPU3: 2228 H/s [T:44c][BUS:9]
[2019-04-25 19:11:33] hashrate: GPU4: 2222 H/s [T:42c][BUS:18]
[2019-04-25 19:11:33] hashrate: GPU5: 2024 H/s [T:38c][BUS:6]
[2019-04-25 19:11:33] hashrate: Total: 12759 H/s

Paste here the first 10 sec of your log

@doktor83

Tweaking seems still disabled for VII. Tried from both the config file and the command line, with different values for tweak_profile, but it always says it's disabled.

This one the best srb miner all time. For me working very well. Thanks Man!!!

i test it with 18.6.1 it's not submit any shear. (uninstall with ddu )
i use with this --disabletweaking but no shear find.

hash rate is fine but after 30m no shear find .   

ok tanx. but what is different from 1.8.2 and new one it's work fine in older version  .?!

not really except DDU and reinstall 18.6.1 drivers

 

any idea ??

TRM is everything but not simple 
You can 'make timing' with other program just use --disabletweaking parameter. it's all written on the first page and in the readme.