SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 33.

mrsimit

newbie

Activity: 3

Merit: 0

Quote from: doktor83 on April 22, 2019, 09:16:32 AM

Quote from: mrsimit on April 22, 2019, 08:43:56 AM

hi doc thanks for the awesome miner,

after 1.8.4 my start.bat is;
SRBMiner-CN.exe --logfile %LOGTIME% --ccryptonighttype normalv4 --cgpuid 0,1,2,3 --cgpuintensity 112,112,112,112 --cgpuworksize 16,16,16,16 --cgputhreads 2,2,2,2 --cgputweakprofile 5,5,5,5 --shutdowntemperature 80 --pools pools.txt

in version 8.4 when miner is start it shows tweaking : enabled. but after I change the version to 1.8.5 and use same start.bat it shows tweaking : disabled. how can I change this situation ?

thanks in advance

Put in some Vega gpus

)
Tweaking is atm only for Vega gpus, so from 1.8.5 if no supported gpu found, tweaking gets disabled.

thanks for the answer doc
my rig is 4 Vega 56

I changed the version to 1.8.4 everything is fine now

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: burntroach85 on April 22, 2019, 08:38:54 PM

hello ive been using this for awhile I LOVE THIS MINER!! by far THEY best and i like the algo switching for M.O anyway i have problems when mining LTH and MSR after a bit shares get rejected an i get banned its FAST2 for msr correct? and cn/r for LTHN anyway i have went threw settings an everything to try to fix this issue with no luck figured id report it to you so you can look into this made the account just for that TY again for all you do man

This is interesting, could you describe it a little more, is this happening on every pool, only these 2 algos, others are fine, which gpu/gpus, is it specific to a miner version or all versions ?

burntroach85

newbie

Activity: 17

Merit: 0

hello ive been using this for awhile I LOVE THIS MINER!! by far THEY best and i like the algo switching for M.O anyway i have problems when mining LTH and MSR after a bit shares get rejected an i get banned its FAST2 for msr correct? and cn/r for LTHN anyway i have went threw settings an everything to try to fix this issue with no luck figured id report it to you so you can look into this made the account just for that TY again for all you do man

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: myka280 on April 22, 2019, 02:08:19 PM

Quote from: doktor83 on April 22, 2019, 01:57:22 PM

Quote from: myka280 on April 22, 2019, 01:49:41 PM

I tested on pool.sumokoin.com:3333 and shares get accepted with 'normalv4' (cn/r)

edit:

also tested on sumokoin.miner.rocks:4005 and shares accepted:

Code:

2019-04-22 21:00:19] Connected to sumokoin.miner.rocks:4005
[2019-04-22 21:00:19] pool_have_job: Pool sent a new job, block height 274432 [ID: 368529262273800]
[2019-04-22 21:00:36] json_send[201]: {"id":10,"jsonrpc": "2.0","method":"submit","params":{"id":"266468460344457","job_id":"368529262273800","nonce":"1c1d0000","result":"df423ea2ef48f16bc31f4c0b319eefa0dad53718281c5b4643cd8cdf7fa40100"}}
[2019-04-22 21:00:36] json_receive[63]: {"id":10,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-04-22 21:00:36] miner_result: GPU0[BUS:3] result 0x00001D1C accepted for job[1] [108ms]
[2019-04-22 21:00:37] json_receive[268]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0808fe9df8e5050b9695ec3714ae4de9de59e6ef444b877aabc1cf938540aa60eff555b7010e6d00000000842f2b4043efeebe4059a49cc6e6944d28e3e2b70d1a8fad39aa7e0b3b3169d001","job_id":"552513435742095","target":"3d2f0200","height":274432}}
[2019-04-22 21:00:37] pool_have_job: Pool sent a new job, block height 274432 [ID: 552513435742095]
[2019-04-22 21:00:50] json_send[201]: {"id":11,"jsonrpc": "2.0","method":"submit","params":{"id":"266468460344457","job_id":"552513435742095","nonce":"572d0080","result":"2b27ea0788d9b54619bf0d7c50934e855685a77fe968afd52ffa75c0ad300000"}}
[2019-04-22 21:00:50] json_receive[63]: {"id":11,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-04-22 21:00:50] miner_result: GPU0[BUS:3] result 0x80002D57 accepted for job[2] [105ms]

what's your config like?

I get ban after 5-10 minutes of mining. I use Adrenalin 18.6.1

Code:

{
"cryptonight_type" : "normalv4",
"intensity" : 0,
"double_threads" : true,
"gpu_conf" : 
[ 
	{ 
	  "id" : 0, 
	  "intensity" : 112,
	  "worksize" : 16,
	  "threads" : 2,
	  "tweak_profile" : 3
	}

SRBMiner-CN.exe --config Config\config-normalv4.txt --pools pool-sumo.txt --logfile %LOGTIME% --apienable --apiport 7777

Can you mine monero or wownero normally? ( same cn/r just other coin)

My guess is that your gpu produces too many invalid (low difficulty) shares because of too much OC, or too low vddc, so you get banned.

myka280

newbie

Activity: 3

Merit: 0

Quote from: doktor83 on April 22, 2019, 01:57:22 PM

Quote from: myka280 on April 22, 2019, 01:49:41 PM

I tested on pool.sumokoin.com:3333 and shares get accepted with 'normalv4' (cn/r)

edit:

also tested on sumokoin.miner.rocks:4005 and shares accepted:

Code:

2019-04-22 21:00:19] Connected to sumokoin.miner.rocks:4005
[2019-04-22 21:00:19] pool_have_job: Pool sent a new job, block height 274432 [ID: 368529262273800]
[2019-04-22 21:00:36] json_send[201]: {"id":10,"jsonrpc": "2.0","method":"submit","params":{"id":"266468460344457","job_id":"368529262273800","nonce":"1c1d0000","result":"df423ea2ef48f16bc31f4c0b319eefa0dad53718281c5b4643cd8cdf7fa40100"}}
[2019-04-22 21:00:36] json_receive[63]: {"id":10,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-04-22 21:00:36] miner_result: GPU0[BUS:3] result 0x00001D1C accepted for job[1] [108ms]
[2019-04-22 21:00:37] json_receive[268]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0808fe9df8e5050b9695ec3714ae4de9de59e6ef444b877aabc1cf938540aa60eff555b7010e6d00000000842f2b4043efeebe4059a49cc6e6944d28e3e2b70d1a8fad39aa7e0b3b3169d001","job_id":"552513435742095","target":"3d2f0200","height":274432}}
[2019-04-22 21:00:37] pool_have_job: Pool sent a new job, block height 274432 [ID: 552513435742095]
[2019-04-22 21:00:50] json_send[201]: {"id":11,"jsonrpc": "2.0","method":"submit","params":{"id":"266468460344457","job_id":"552513435742095","nonce":"572d0080","result":"2b27ea0788d9b54619bf0d7c50934e855685a77fe968afd52ffa75c0ad300000"}}
[2019-04-22 21:00:50] json_receive[63]: {"id":11,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-04-22 21:00:50] miner_result: GPU0[BUS:3] result 0x80002D57 accepted for job[2] [105ms]

what's your config like?

I get ban after 5-10 minutes of mining. I use Adrenalin 18.6.1

Code:

{
"cryptonight_type" : "normalv4",
"intensity" : 0,
"double_threads" : true,
"gpu_conf" : 
[ 
	{ 
	  "id" : 0, 
	  "intensity" : 112,
	  "worksize" : 16,
	  "threads" : 2,
	  "tweak_profile" : 3
	}

SRBMiner-CN.exe --config Config\config-normalv4.txt --pools pool-sumo.txt --logfile %LOGTIME% --apienable --apiport 7777

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: myka280 on April 22, 2019, 01:49:41 PM

Srbminer gets banned on a pool because of invalid shares when mining sumokoin (cryptonight_r). Tested on miner rocks and hashvault pools with Srbminers 1.8.3 1.8.4 and 1.8.5. Does anybody have an idea why ?

Code:

[2019-04-22 18:38:21] json_send[257]: {"id":94,"jsonrpc": "2.0","method":"submit","params":{"id":"a060e017-5377-4e4a-96cd-d26a07dc10ef","job_id":"62611261-7f02-4a18-bfe0-d8e61f0b0300","nonce":"0b680090","result":"138a7661b6db9bd51eb4ed28143fa62e295f910729405d312938b75200030000","algo":"cn/r"}}
[2019-04-22 18:38:21] json_receive[361]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0808fbbef7e5051601a527c32744df6187ee9c355e2599e61efcf71199bdb1482740aead744251000000004ef045c235718b7b4f181519d3a072c357d993d94680283698dc448fc26d90dd06","job_id":"62611261-7f02-4a18-bfe0-d8e61f0b0300","target":"50230000","id":"a060e017-5377-4e4a-96cd-d26a07dc10ef","height":274377,"algo":"cn/r","variant":"r"}}
[2019-04-22 18:38:21] pool_have_job: Pool sent a new job, block height 274377 [ID: 62611261-7f02-4a18-bfe0-d8e61f0b0300] [normalv4]
[2019-04-22 18:38:21] json_receive[78]: {"id":94,"jsonrpc":"2.0","error":{"code":-1,"message":"Low difficulty share"}}
[2019-04-22 18:38:21] miner_result: GPU4[BUS:7] result rejected for job[11] [low difficulty share]

Code:

[2019-04-22 00:25:20] miner_result: GPU0[BUS:6] result rejected for job[11] [incorrect share]
[2019-04-22 00:25:31] json_send[201]: {"id":34,"jsonrpc": "2.0","method":"submit","params":{"id":"995632181443679","job_id":"847126244800953","nonce":"b7780140","result":"1e18e28c6904aba5fc8172ffdc73d5ec8fee4411c8e174848f6366c6ef360000"}}
[2019-04-22 00:25:31] json_receive[73]: {"id":34,"jsonrpc":"2.0","error":{"code":20,"message":"Incorrect share"}}
...
[2019-04-22 00:29:18] json_receive[135]: {"id":2,"jsonrpc":"2.0","error":{"code":20,"message":"your miner is banned (569 seconds left), because sends a lot of invalid shares"}}

I tested on pool.sumokoin.com:3333 and shares get accepted with 'normalv4' (cn/r)

edit:

also tested on sumokoin.miner.rocks:4005 and shares accepted:

Code:

[2019-04-22 21:00:19] Connected to sumokoin.miner.rocks:4005
[2019-04-22 21:00:19] pool_have_job: Pool sent a new job, block height 274432 [ID: 368529262273800]
[2019-04-22 21:00:36] json_send[201]: {"id":10,"jsonrpc": "2.0","method":"submit","params":{"id":"266468460344457","job_id":"368529262273800","nonce":"1c1d0000","result":"df423ea2ef48f16bc31f4c0b319eefa0dad53718281c5b4643cd8cdf7fa40100"}}
[2019-04-22 21:00:36] json_receive[63]: {"id":10,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-04-22 21:00:36] miner_result: GPU0[BUS:3] result 0x00001D1C accepted for job[1] [108ms]
[2019-04-22 21:00:37] json_receive[268]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0808fe9df8e5050b9695ec3714ae4de9de59e6ef444b877aabc1cf938540aa60eff555b7010e6d00000000842f2b4043efeebe4059a49cc6e6944d28e3e2b70d1a8fad39aa7e0b3b3169d001","job_id":"552513435742095","target":"3d2f0200","height":274432}}
[2019-04-22 21:00:37] pool_have_job: Pool sent a new job, block height 274432 [ID: 552513435742095]
[2019-04-22 21:00:50] json_send[201]: {"id":11,"jsonrpc": "2.0","method":"submit","params":{"id":"266468460344457","job_id":"552513435742095","nonce":"572d0080","result":"2b27ea0788d9b54619bf0d7c50934e855685a77fe968afd52ffa75c0ad300000"}}
[2019-04-22 21:00:50] json_receive[63]: {"id":11,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-04-22 21:00:50] miner_result: GPU0[BUS:3] result 0x80002D57 accepted for job[2] [105ms]

what's your config like?

myka280

newbie

Activity: 3

Merit: 0

Srbminer gets banned on a pool because of invalid shares when mining sumokoin (cryptonight_r). Tested on miner rocks and hashvault pools with Srbminers 1.8.3 1.8.4 and 1.8.5. Does anybody have an idea why ?

Code:

[2019-04-22 18:38:21] json_send[257]: {"id":94,"jsonrpc": "2.0","method":"submit","params":{"id":"a060e017-5377-4e4a-96cd-d26a07dc10ef","job_id":"62611261-7f02-4a18-bfe0-d8e61f0b0300","nonce":"0b680090","result":"138a7661b6db9bd51eb4ed28143fa62e295f910729405d312938b75200030000","algo":"cn/r"}}
[2019-04-22 18:38:21] json_receive[361]: {"jsonrpc":"2.0","method":"job","params":{"blob":"0808fbbef7e5051601a527c32744df6187ee9c355e2599e61efcf71199bdb1482740aead744251000000004ef045c235718b7b4f181519d3a072c357d993d94680283698dc448fc26d90dd06","job_id":"62611261-7f02-4a18-bfe0-d8e61f0b0300","target":"50230000","id":"a060e017-5377-4e4a-96cd-d26a07dc10ef","height":274377,"algo":"cn/r","variant":"r"}}
[2019-04-22 18:38:21] pool_have_job: Pool sent a new job, block height 274377 [ID: 62611261-7f02-4a18-bfe0-d8e61f0b0300] [normalv4]
[2019-04-22 18:38:21] json_receive[78]: {"id":94,"jsonrpc":"2.0","error":{"code":-1,"message":"Low difficulty share"}}
[2019-04-22 18:38:21] miner_result: GPU4[BUS:7] result rejected for job[11] [low difficulty share]

Code:

[2019-04-22 00:25:20] miner_result: GPU0[BUS:6] result rejected for job[11] [incorrect share]
[2019-04-22 00:25:31] json_send[201]: {"id":34,"jsonrpc": "2.0","method":"submit","params":{"id":"995632181443679","job_id":"847126244800953","nonce":"b7780140","result":"1e18e28c6904aba5fc8172ffdc73d5ec8fee4411c8e174848f6366c6ef360000"}}
[2019-04-22 00:25:31] json_receive[73]: {"id":34,"jsonrpc":"2.0","error":{"code":20,"message":"Incorrect share"}}
...
[2019-04-22 00:29:18] json_receive[135]: {"id":2,"jsonrpc":"2.0","error":{"code":20,"message":"your miner is banned (569 seconds left), because sends a lot of invalid shares"}}

duketasos

newbie

Activity: 28

Merit: 0

forgot to add drivers: 18.5.1

duketasos

newbie

Activity: 28

Merit: 0

Quote from: doktor83 on April 22, 2019, 09:16:32 AM

Quote from: mrsimit on April 22, 2019, 08:43:56 AM

hi doc thanks for the awesome miner,

after 1.8.4 my start.bat is;
SRBMiner-CN.exe --logfile %LOGTIME% --ccryptonighttype normalv4 --cgpuid 0,1,2,3 --cgpuintensity 112,112,112,112 --cgpuworksize 16,16,16,16 --cgputhreads 2,2,2,2 --cgputweakprofile 5,5,5,5 --shutdowntemperature 80 --pools pools.txt

in version 8.4 when miner is start it shows tweaking : enabled. but after I change the version to 1.8.5 and use same start.bat it shows tweaking : disabled. how can I change this situation ?

thanks in advance

Put in some Vega gpus

)
Tweaking is atm only for Vega gpus, so from 1.8.5 if no supported gpu found, tweaking gets disabled.

Doc tweak works (almost**) at 1.8.4 , at your new version it just sais disabled...no matter what i do (7x ref vegas 56 all samsung mem)
now about the almost...it works only at prof 1 all others freeze instantly the system... cards at 1407/950 940/900 PPTs 1100 hbm (the classic everyone uses) old version overdrive.

Iamtutut

full member

Activity: 1120

Merit: 131

Quote from: marcotheminer on April 22, 2019, 09:01:37 AM

For those mining ETN (good time to pick some up, good on you): https://lab.antpool.com/
They have a month of 0% fee, might as well use them if you trust them.

Please PM me if this is not an appropriate thread to post this in.

Mining ETN (electroneum) with a GPU ? Is that some kind of trolling ? You want to make 2 cents per day per GPU...Even with totally free electricity I'd never mine this anymore.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: mrsimit on April 22, 2019, 08:43:56 AM

hi doc thanks for the awesome miner,

after 1.8.4 my start.bat is;
SRBMiner-CN.exe --logfile %LOGTIME% --ccryptonighttype normalv4 --cgpuid 0,1,2,3 --cgpuintensity 112,112,112,112 --cgpuworksize 16,16,16,16 --cgputhreads 2,2,2,2 --cgputweakprofile 5,5,5,5 --shutdowntemperature 80 --pools pools.txt

in version 8.4 when miner is start it shows tweaking : enabled. but after I change the version to 1.8.5 and use same start.bat it shows tweaking : disabled. how can I change this situation ?

thanks in advance

Put in some Vega gpus

)
Tweaking is atm only for Vega gpus, so from 1.8.5 if no supported gpu found, tweaking gets disabled.

marcotheminer

legendary

Activity: 2072

Merit: 1049

┴puoʎǝq ʞool┴

For those mining ETN (good time to pick some up, good on you): https://lab.antpool.com/
They have a month of 0% fee, might as well use them if you trust them.

Please PM me if this is not an appropriate thread to post this in.

mrsimit

newbie

Activity: 3

Merit: 0

hi doc thanks for the awesome miner,

after 1.8.4 my start.bat is;
SRBMiner-CN.exe --logfile %LOGTIME% --ccryptonighttype normalv4 --cgpuid 0,1,2,3 --cgpuintensity 112,112,112,112 --cgpuworksize 16,16,16,16 --cgputhreads 2,2,2,2 --cgputweakprofile 5,5,5,5 --shutdowntemperature 80 --pools pools.txt

in version 8.4 when miner is start it shows tweaking : enabled. but after I change the version to 1.8.5 and use same start.bat it shows tweaking : disabled. how can I change this situation ?

thanks in advance

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: livada on April 22, 2019, 07:30:12 AM

Quote from: doktor83 on April 22, 2019, 07:29:09 AM

Quote from: livada on April 22, 2019, 07:28:22 AM

Quote from: doktor83 on April 22, 2019, 07:25:52 AM

Quote from: livada on April 22, 2019, 07:15:09 AM

Quote from: doktor83 on April 22, 2019, 06:14:04 AM

V1.8.5
- Fixed the 'tweak_profile' changing with + - on keyboard
- Tweaking is now auto disabled if no supported devices found

This release is a quick fix

+ There was a bug with using + - while mining to switch tweak_profiles. Miner reported 0 hash after switch and restarted itself. This should now be fixed.

+ If no tweak supported devices found, tweaking is auto disabled so no unneccessary resources are used

SRBMINER block AMD MEM TWEAK Huh

Failed to load EIO.dll

after srb 1.8.4 start amd tweak stop work.

wtf?

use other option. iff user not use + for tweak not block amd mem tweek . if use block tweak.

i use srbminer but i wont use beter tweak (amd mem tweek) not srb miner tweak.

Use the --disabletweaking parameter if you are going to use an external software to change timings on the fly.

problem je nakon izlaska iz srbminera. i dalje je bllokiran taj EIO. ja koristim tvoj tweek al nakon toga moram restartat cijeli miner da ponistim taj block. to bas i nije normalno.

Ako koristis --disabletweaking onda nije nista blokirano.

pa korstio sam srbminer npr na lite algui s tweakom izadjem van i ocu upotrijebit amd tweakera i ne mogu eto tu je problem. moras restartat stroj.
jednom kad upotrijebis srbminera bez disable moras restartat stroj jer je zauvjek blokirao amd mem tweakera.

Znaci koristi ili samo majnerov tweak ili onaj tweak. Tako je kako je. Necu da mi se iscitavaju strapovi koje kreira majner.

livada

newbie

Activity: 417

Merit: 0

Quote from: doktor83 on April 22, 2019, 07:29:09 AM

Quote from: livada on April 22, 2019, 07:28:22 AM

Quote from: doktor83 on April 22, 2019, 07:25:52 AM

Quote from: livada on April 22, 2019, 07:15:09 AM

Quote from: doktor83 on April 22, 2019, 06:14:04 AM

V1.8.5
- Fixed the 'tweak_profile' changing with + - on keyboard
- Tweaking is now auto disabled if no supported devices found

This release is a quick fix

+ There was a bug with using + - while mining to switch tweak_profiles. Miner reported 0 hash after switch and restarted itself. This should now be fixed.

+ If no tweak supported devices found, tweaking is auto disabled so no unneccessary resources are used

SRBMINER block AMD MEM TWEAK Huh

Failed to load EIO.dll

after srb 1.8.4 start amd tweak stop work.

wtf?

use other option. iff user not use + for tweak not block amd mem tweek . if use block tweak.

i use srbminer but i wont use beter tweak (amd mem tweek) not srb miner tweak.

Use the --disabletweaking parameter if you are going to use an external software to change timings on the fly.

problem je nakon izlaska iz srbminera. i dalje je bllokiran taj EIO. ja koristim tvoj tweek al nakon toga moram restartat cijeli miner da ponistim taj block. to bas i nije normalno.

Ako koristis --disabletweaking onda nije nista blokirano.

pa koristio sam srbminer npr na lite algui s tweakom izadjem van i hocu upotrijebit amd tweakera i ne mogu. eto tu je problem. moras restartat stroj.
jednom kad upotrijebis srbminera bez disable moras restartat stroj jer je zauvjek blokirao amd mem tweakera.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: livada on April 22, 2019, 07:28:22 AM

Quote from: doktor83 on April 22, 2019, 07:25:52 AM

Quote from: livada on April 22, 2019, 07:15:09 AM

Quote from: doktor83 on April 22, 2019, 06:14:04 AM

V1.8.5
- Fixed the 'tweak_profile' changing with + - on keyboard
- Tweaking is now auto disabled if no supported devices found

This release is a quick fix

+ There was a bug with using + - while mining to switch tweak_profiles. Miner reported 0 hash after switch and restarted itself. This should now be fixed.

+ If no tweak supported devices found, tweaking is auto disabled so no unneccessary resources are used

SRBMINER block AMD MEM TWEAK Huh

Failed to load EIO.dll

after srb 1.8.4 start amd tweak stop work.

wtf?

use other option. iff user not use + for tweak not block amd mem tweek . if use block tweak.

i use srbminer but i wont use beter tweak (amd mem tweek) not srb miner tweak.

Use the --disabletweaking parameter if you are going to use an external software to change timings on the fly.

problem je nakon izlaska iz srbminera. i dalje je bllokiran taj EIO. ja koristim tvoj tweek al nakon toga moram restartat cijeli miner da ponistim taj block. to bas i nije normalno.

Ako koristis --disabletweaking onda nije nista blokirano.

livada

newbie

Activity: 417

Merit: 0

Quote from: doktor83 on April 22, 2019, 07:25:52 AM

Quote from: livada on April 22, 2019, 07:15:09 AM

Quote from: doktor83 on April 22, 2019, 06:14:04 AM

V1.8.5
- Fixed the 'tweak_profile' changing with + - on keyboard
- Tweaking is now auto disabled if no supported devices found

This release is a quick fix

+ There was a bug with using + - while mining to switch tweak_profiles. Miner reported 0 hash after switch and restarted itself. This should now be fixed.

+ If no tweak supported devices found, tweaking is auto disabled so no unneccessary resources are used

SRBMINER block AMD MEM TWEAK Huh

Failed to load EIO.dll

after srb 1.8.4 start amd tweak stop work.

wtf?

use other option. iff user not use + for tweak not block amd mem tweek . if use block tweak.

i use srbminer but i wont use beter tweak (amd mem tweek) not srb miner tweak.

Use the --disabletweaking parameter if you are going to use an external software to change timings on the fly.

problem je nakon izlaska iz srbminera. i dalje je bllokiran taj EIO. ja koristim tvoj tweek al nakon toga moram restartat cijeli miner da ponistim taj block. to bas i nije normalno.

ktome sto moram nesto disablirat ak nisa mupotrijebio niejdnu opciju koja bi uplaila tweekera niti sam stisnuo + ?

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: livada on April 22, 2019, 07:15:09 AM

Quote from: doktor83 on April 22, 2019, 06:14:04 AM

V1.8.5
- Fixed the 'tweak_profile' changing with + - on keyboard
- Tweaking is now auto disabled if no supported devices found

This release is a quick fix

+ There was a bug with using + - while mining to switch tweak_profiles. Miner reported 0 hash after switch and restarted itself. This should now be fixed.

+ If no tweak supported devices found, tweaking is auto disabled so no unneccessary resources are used

SRBMINER block AMD MEM TWEAK Huh

Failed to load EIO.dll

after srb 1.8.4 start amd tweak stop work.

wtf?

use other option. iff user not use + for tweak not block amd mem tweek . if use block tweak.

i use srbminer but i wont use beter tweak (amd mem tweek) not srb miner tweak.

Use the --disabletweaking parameter if you are going to use an external software to change timings on the fly.

livada

newbie

Activity: 417

Merit: 0

Quote from: doktor83 on April 22, 2019, 06:14:04 AM

V1.8.5
- Fixed the 'tweak_profile' changing with + - on keyboard
- Tweaking is now auto disabled if no supported devices found

This release is a quick fix

+ There was a bug with using + - while mining to switch tweak_profiles. Miner reported 0 hash after switch and restarted itself. This should now be fixed.

+ If no tweak supported devices found, tweaking is auto disabled so no unneccessary resources are used

SRBMINER block AMD MEM TWEAK Huh

Failed to load EIO.dll

after srb 1.8.4 start amd tweak stop work.

wtf?

use other option. iff user not use + for tweak not block amd mem tweek . if use block tweak.

i use srbminer but i wont use beter tweak (amd mem tweek) not srb miner tweak.

problem is : when i go out and use other miner amd tweek not work. srb block and not work after exit. only restart unblock amd tweek. this is problem.

doktor83

hero member

Activity: 2548

Merit: 626

V1.8.5
- Fixed the 'tweak_profile' changing with + - on keyboard
- Tweaking is now auto disabled if no supported devices found

This release is a quick fix

+ There was a bug with using + - while mining to switch tweak_profiles. Miner reported 0 hash after switch and restarted itself. This should now be fixed.

+ If no tweak supported devices found, tweaking is auto disabled so no unneccessary resources are used

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 33. (Read 237261 times)