SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 318.

rig1313

newbie

Activity: 16

Merit: 0

Hello Doktor

i have 11 gpus

miner crashing when double threads is on for all of them

i must set some of them on 1 that miner work properly

whats the problem?

ur miner can handle only 7 gpus with double threads?

liomojo1

hero member

Activity: 676

Merit: 500

Quote from: ALEX_RAA on April 19, 2018, 05:36:55 AM

Quote from: liomojo1 on April 19, 2018, 05:14:41 AM

It is hynix 1170/2150 modded bios , they make 30 on eth that way and 940 on sumo

for cryptonight algo big metter only gpu core clock, if your gpu can do 1250-1300mhz - you will see ~1000h/s per card.
Just overclock gpu to 1300mhz and clock down memmory to 2050mhz

Well after 1400/2100 the hashrate got lower from 830-50 to 790 . So this is not a good decision or I am doing something wrong?

doktor83

hero member

Activity: 2548

Merit: 626

i will add some logic to check if share was already sent, and if it was , don't send it again.
Maybe sometimes a sneaky share is sent two times.

JuanHungLo

hero member

Activity: 935

Merit: 1001

I don't always drink...

Quote from: dannyprats on April 18, 2018, 08:20:04 PM

I get "your IP is banned" ..

SRBminer v1.4.4

https://imgur.com/a/srBuIhH

pool: https://cryptoknight.cc/haven/

Anyone else with this problem?

PD: I was mining for a week without problems with v1.3.1, last night I updated to version 1.4.4.

I have this problem. It is with Stellite Pool - CryptoKnight.

It does it with this current miner AND xmr-stak-stellitequestion-compiled-0.

And, no, it is NOT because of the incorrect algo being picked.

~~So, I conclude that it is a POOL problem, not a config or miner problem~~

I have brought it to the attention of the pool's thread.

ALEX_RAA

newbie

Activity: 78

Merit: 0

Quote from: doktor83 on April 19, 2018, 05:39:43 AM

Quote from: ALEX_RAA on April 19, 2018, 04:40:08 AM

sorry for noob question but how to see when miner is minig to dev? is it showed in the console?

yes, its displayed when it starts and when it ends.

ohh... finaly i find it in console and i see that after dev fee mining is end miner try to send duplicate shares... what is that?

https://preview.ibb.co/kd3gcS/2018_04_19_142719.png

p.s. thats happen after every dev fee mining session

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: ALEX_RAA on April 19, 2018, 04:40:08 AM

sorry for noob question but how to see when miner is minig to dev? is it showed in the console?

yes, its displayed when it starts and when it ends.

ALEX_RAA

newbie

Activity: 78

Merit: 0

Quote from: liomojo1 on April 19, 2018, 05:14:41 AM

It is hynix 1170/2150 modded bios , they make 30 on eth that way and 940 on sumo

for cryptonight algo big metter only gpu core clock, if your gpu can do 1250-1300mhz - you will see ~1000h/s per card.
Just overclock gpu to 1300mhz and clock down memmory to 2050mhz

Q_R_V

sr. member

Activity: 428

Merit: 250

Inactivity: 8963

If it's hynix or micron then you will need tighter timings or higher memory clock. Timings for eth are not ideal when used on xmr.

liomojo1

hero member

Activity: 676

Merit: 500

It is hynix 1170/2150 modded bios , they make 30 on eth that way and 940 on sumo

Q_R_V

sr. member

Activity: 428

Merit: 250

Inactivity: 8963

Quote from: liomojo1 on April 19, 2018, 04:45:54 AM

Guys give advice for rx580 8gb , i can`t get it to hash more than 830h , 2 treads 55 intensity. Any suggestion?

What memory do you have and what clocks have you tried? 2 treads, 56 intensity, 8GB Samsung with ubermix 3.1 @ 1250cc 2000mc should give you 1000h/s or more.

liomojo1

hero member

Activity: 676

Merit: 500

Guys give advice for rx580 8gb , i can`t get it to hash more than 830h , 2 treads 55 intensity. Any suggestion?

ALEX_RAA

newbie

Activity: 78

Merit: 0

sorry for noob question but how to see when miner is minig to dev? is it showed in the console?

bovineplane

jr. member

Activity: 153

Merit: 2

Quote from: Sgsg666 on April 19, 2018, 03:04:10 AM

https://minerstat.com/ Is Srbminer the same as minerstat? watchdog/reset rig and all that? is someone using this? Currently Im mining on Normalv7 at intensity 120 on vega 56 with 1810 H/s, 155 w based on Hwinfo. I havent figured out how to mine with same hashrates on xmrstak using only gpu.

Try 110.5, 2 thread, 16 worksize on the vega. If your mem is at 925-950 that should get you over 1900.

Sgsg666

jr. member

Activity: 113

Merit: 1

https://minerstat.com/ Is Srbminer the same as minerstat? watchdog/reset rig and all that? is someone using this? Currently Im mining on Normalv7 at intensity 120 on vega 56 with 1810 H/s, 155 w based on Hwinfo. I havent figured out how to mine with same hashrates on xmrstak using only gpu.

serg3140

newbie

Activity: 3

Merit: 0

how to fix one difficulty? For example, 560000 on Haven

bovineplane

jr. member

Activity: 153

Merit: 2

Quote from: CryptoPlay on April 18, 2018, 11:05:31 PM

Quote from: dannyprats on April 18, 2018, 08:20:04 PM

I get "your IP is banned" ..

SRBminer v1.4.4

https://imgur.com/a/srBuIhH

pool: https://cryptoknight.cc/haven/

Anyone else with this problem?

PD: I was mining for a week without problems with v1.3.1, last night I updated to version 1.4.4.

You probably selected the wrong algo...
The IP ban usually is lifted in 30min...pretty fast.

Our IP ban is only 10 minutes and it is for invalid shares. As stated this is most commonly related to the wrong algo selected in the miner.

CryptoPlay

jr. member

Activity: 202

Merit: 2

Quote from: dannyprats on April 18, 2018, 08:20:04 PM

I get "your IP is banned" ..

SRBminer v1.4.4

https://imgur.com/a/srBuIhH

pool: https://cryptoknight.cc/haven/

Anyone else with this problem?

PD: I was mining for a week without problems with v1.3.1, last night I updated to version 1.4.4.

You probably selected the wrong algo...
The IP ban usually is lifted in 30min...pretty fast.

dannyprats

member

Activity: 132

Merit: 10

I get "your IP is banned" ..

SRBminer v1.4.4

https://imgur.com/a/srBuIhH

pool: https://cryptoknight.cc/haven/

Anyone else with this problem?

PD: I was mining for a week without problems with v1.3.1, last night I updated to version 1.4.4.

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: dragonmike on April 18, 2018, 09:27:06 AM

Quote from: bovineplane on April 18, 2018, 08:56:23 AM

Quote from: dragonmike on April 18, 2018, 08:52:34 AM

If anyone's using SRB miner to mine TRTL please check your stats on the pool. I just noticed the following:

https://bitcointalksearch.org/topic/m.35002699

Basically hashrate for both my rigs was lost in ether for several hours. So at this stage I don't know if the pool, the miner or anything else is at fault.

Mining TRTL is an adventure. The fast block times makes so many forks. Hard not to blame SRB for the occasional lost hash but also hard not to blame TRTL.

Yes, I'm not pointing any fingers as I don't know the cause of the issue, so just making people aware at this stage, really. I doubt it's a miner issue as both my rigs seem to have stopped contributing (or the pool stopped registering hashrate from my rigs) at the same time (which would be quite a coincidence, considering they did not start mining TRTL at the same time at all).

All sorted!
My hashes didn't get lost. They went to the US server I had set as backup. I wasn't aware the pool had two segregated web front-ends. Thanks to CodIsAFish for helping me sorting out!

bruslie

newbie

Activity: 22

Merit: 0

hy thx for your great work !

can you plz add :Share Time , i am using static diff so i want to know always my Target Time .

thx

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 318. (Read 237263 times)