SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 315.

Q_R_V

sr. member

Activity: 428

Merit: 250

Inactivity: 8963

Quote from: goodb on April 20, 2018, 12:59:12 PM

[...] it was a known problem for sgminer , on stats what GPUnumber : what hash rate: What temp/clock values, never matches, it is a crazy game for multi gpu systems.. [...]

i increment core clock by 1 MHz for each next card, this way i know for sure which is which.

goodb

newbie

Activity: 126

Merit: 0

This is my problem :

Careful eyes would notice that ; between 2 configuration everything is same except left side, one RX 580 card from 1250 MHZ to -->1380 mhz (default clock) restored (GPU1), but where is the hash change , for monero ?

Dear DOc, it was a known problem for sgminer , on stats what GPUnumber : what hash rate: What temp/clock values, never matches, it is a crazy game for multi gpu systems..

Do you think you can do something?

Addition: Actually what we need is the number of shares submitted for each (real)GPU number ? Only so, We can optimize each GPU is working healthy ..or compare it for wrong overclock/underclock.

https://abload.de/img/hash_confuse11dpx0.jpg

cryptolelefla

member

Activity: 121

Merit: 10

i have two rigs with mixed gpu. rx 470 and 570 4/8 gb memory from different producers
getting 820-890 with those settings
{ "id" : 0, "intensity" : 56, "worksize" : 8, "threads" : 2},
   { "id" : 1, "intensity" : 56, "worksize" : 8, "threads" : 2},
   { "id" : 2, "intensity" : 54, "worksize" : 8, "threads" : 2},
   { "id" : 3, "intensity" : 59, "worksize" : 8, "threads" : 2},
   { "id" : 4, "intensity" : 54, "worksize" : 8, "threads" : 2},
   { "id" : 5, "intensity" : 56, "worksize" : 8, "threads" : 2},
   { "id" : 6, "intensity" : 56, "worksize" : 8, "threads" : 2},
   { "id" : 7, "intensity" : 55, "worksize" : 8, "threads" : 2},
all my gpu are firmware tweaked... (different straps)
my aferburner settings are stock core clock and 2100 memclock... 920 mv
id 5 and id 3 are 8gb gpus, the rests are 4gb

cryptolelefla

member

Activity: 121

Merit: 10

~~hello guys i'm experiencing problem downloading from mega.. anybody else???~~
is working right now...

christiano88

member

Activity: 161

Merit: 10

Something is acting up with CN-heavy, I remember someone posted before, you can get 2 speeds, one high speed (e.g. 1000h/s) or 10% lower (900h/s). I have to start the miner almost a dozen times so that I can get the right speed (1000h/s). Can you look into it? It keeps that high speed later on, unless the pool disconnects, then there's a big chance it will start with lower speed.

alczaty

newbie

Activity: 38

Merit: 0

why i have - socket was closed while recriving data ? CN heavy
edit 1 :
also i have this
https://imgur.com/a/SY78kmH

fanisk21

newbie

Activity: 47

Merit: 0

Quote from: Saphire on April 20, 2018, 10:12:16 AM

where do we write Rig name (worker) in V1.4.6 ?

I don't know if the miner have a specific command for that. but i use WALLETADDRESS.rigname. It works dpending on the pool

fanisk21

newbie

Activity: 47

Merit: 0

Quote from: Luisjc69 on April 20, 2018, 08:55:38 AM

Quote from: fanisk21 on April 20, 2018, 07:49:50 AM

Quote from: Luisjc69 on April 20, 2018, 07:24:14 AM

Hi Guys,

anyone have settings for RX580 8giga?

not only intensity, also threads, worksize etc...

Thx for help

Luisa

I'm using I=58, W=16, T=2 on 6 MSI RX580 ARMOR 8G (Micron) with 1500+ straps. And i'm getting 1050+hs with CN-Heavy.

clocks - 1200/2200 - 900/900 mv

Can you explain me what u mean with 1500+ Straps? my cards are flash with coustom bios about ETH! (1 year ago!!)

ok,

i get 920Hs with Haven! 1200/2250Mem und 920mV

{ "id" : 0, "intensity" : 58, "worksize" : 16, "threads" : 2}, that what i have and also only like 920Hash Sad

Thx all for help

Luisa

straps are the timings of the memorys. when i say 1500+ it means that i copied the 1500 value of the original bios to each other next.

Try to use worksize 8

Saphire

full member

Activity: 602

Merit: 114

where do we write Rig name (worker) in V1.4.6 ?

daotienao1217

newbie

Activity: 15

Merit: 0

I see SRBMiner very well. Dev can create an SRB proxy for SRBMiner Cryptonight

Luisjc69

member

Activity: 163

Merit: 10

no pay for customs bios omg
..

i have also the bios customs straps for ETH.

So my question,

what we need to do about bios for cryptonight?

thx

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: murgorx on April 20, 2018, 08:56:57 AM

Can anyone advise what should I be using for Special Edition RX580 Sapphire Nitro+ with Micron memory 8 GB. I get 1220/2200 with 900/900 only 860h/s... using an ETH bios mod tho, dunno where I can find a bios mod for cryptonight heavy

there are folks offering a Bios mod/Performance timing per gpus with a decent price

https://mining-bios.eu/

I don't tried them yet personally, as I'm satisfied with custom straps made also for ETH

murgorx

member

Activity: 443

Merit: 13

Can anyone advise what should I be using for Special Edition RX580 Sapphire Nitro+ with Micron memory 8 GB. I get 1220/2200 with 900/900 only 860h/s... using an ETH bios mod tho, dunno where I can find a bios mod for cryptonight heavy

Luisjc69

member

Activity: 163

Merit: 10

Quote from: fanisk21 on April 20, 2018, 07:49:50 AM

Quote from: Luisjc69 on April 20, 2018, 07:24:14 AM

Hi Guys,

anyone have settings for RX580 8giga?

not only intensity, also threads, worksize etc...

Thx for help

Luisa

I'm using I=58, W=16, T=2 on 6 MSI RX580 ARMOR 8G (Micron) with 1500+ straps. And i'm getting 1050+hs with CN-Heavy.

clocks - 1200/2200 - 900/900 mv

Can you explain me what u mean with 1500+ Straps? my cards are flash with coustom bios about ETH! (1 year ago!!)

ok,

i get 920Hs with Haven! 1200/2250Mem und 920mV

{ "id" : 0, "intensity" : 58, "worksize" : 16, "threads" : 2}, that what i have and also only like 920Hash Sad

Thx all for help

Luisa

Luisjc69

member

Activity: 163

Merit: 10

Quote from: Larvitar on April 20, 2018, 07:31:26 AM

Quote from: Luisjc69 on April 20, 2018, 07:24:14 AM

Hi Guys,

anyone have settings for RX580 8giga?

not only intensity, also threads, worksize etc...

Thx for help

Luisa

It's hard to say it generically. What are your memory? Micron, Hynix or Samsung?

Hynix! and only one Samsung.

12 Cards hynix one Samsung.

Thx for help
Luisa

fanisk21

newbie

Activity: 47

Merit: 0

Quote from: Luisjc69 on April 20, 2018, 07:24:14 AM

Hi Guys,

anyone have settings for RX580 8giga?

not only intensity, also threads, worksize etc...

Thx for help

Luisa

I'm using I=58, W=16, T=2 on 6 MSI RX580 ARMOR 8G (Micron) with 1500+ straps. And i'm getting 1050+hs with CN-Heavy.

clocks - 1200/2200 - 900/900 mv

Larvitar

jr. member

Activity: 196

Merit: 1

Quote from: Luisjc69 on April 20, 2018, 07:24:14 AM

Hi Guys,

anyone have settings for RX580 8giga?

not only intensity, also threads, worksize etc...

Thx for help

Luisa

It's hard to say it generically. What are your memory? Micron, Hynix or Samsung?

Luisjc69

member

Activity: 163

Merit: 10

Hi Guys,

anyone have settings for RX580 8giga?

not only intensity, also threads, worksize etc...

Thx for help

Luisa

4ward

member

Activity: 473

Merit: 18

Quote from: noreit on April 20, 2018, 05:17:24 AM

Add API and I am in

I second that
Need API for monitoring

alivanich

newbie

Activity: 21

Merit: 0

Quote from: doktor83 on April 19, 2018, 09:48:36 AM

V1.4.5
- Added check of already sent result, so possibly no more duplicate shares should be sent to the pool
- Added GPU core clock & memory display (ADL OverdriveN supported cards) BETA

Also added an experiimental kernel (4) , so if you guys with old gpu's could check it that would be great

1.4.6
[2018-04-20 02:18:56] AMD platform FOUND
[2018-04-20 02:18:56] Found 5 AMD devices
[2018-04-20 02:18:56] GPU0: AMD Radeon (TM) R7 370 Series [Pitcairn] [4096 MB][Intensity 30.0][W: 8][T: 2][BUS_ID: 1]
[2018-04-20 02:18:56] GPU1: AMD Radeon (TM) R7 370 Series [Pitcairn] [4096 MB][Intensity 30.0][W: 8][T: 2][BUS_ID: 7]
[2018-04-20 02:18:56] GPU2: AMD Radeon (TM) R7 370 Series [Pitcairn] [4096 MB][Intensity 30.0][W: 8][T: 2][BUS_ID: 4]
[2018-04-20 02:18:56] GPU3: AMD Radeon (TM) R7 370 Series [Pitcairn] [4096 MB][Intensity 30.0][W: 8][T: 2][BUS_ID: 3]
[2018-04-20 02:18:56] GPU4: AMD Radeon (TM) R7 370 Series [Pitcairn] [4096 MB][Intensity 30.0][W: 8][T: 2][BUS_ID: 2]

each card show 504 h/s
there is almost no difference in comparison with 1.3.0 version. But more then 500 h/s for this card is an excellent result.

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 315. (Read 237247 times)