Can someone help ! how t set difficulty on SRB 1.4.6
that is something that is pool related, not miner.
Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 314. (Read 237247 times)
April 20, 2018, 11:48:01 PM
that is something that is pool related, not miner.
April 20, 2018, 11:47:38 PM
@doktor83 Please make an option for simple one bat file, where we can put all data for mining, like claymore cryptonight miner, or sgminer for example with simple commands (-o -a -w -g -I...), why separate so much config, pools, etc and so much unnecessary files??
I will add that, few of you asked for it, so you will get it
April 20, 2018, 11:46:43 PM
hy again 
@doktor83 is SRBMiner showing AMD Invalid results aswell as Acceptept total shares ?
it would be verry helpful for me to know the share time in stats ...
thx again
@doktor83 is SRBMiner showing AMD Invalid results aswell as Acceptept total shares ?
it would be verry helpful for me to know the share time in stats ...
thx again
Invalid results = HW errors in SRBminer
Also what is a share time ?
April 20, 2018, 10:03:20 PM
Can someone help ! how t set difficulty on SRB 1.4.6
April 20, 2018, 09:45:51 PM
@doktor83 Please make an option for simple one bat file, where we can put all data for mining, like claymore cryptonight miner, or sgminer for example with simple commands (-o -a -w -g -I...), why separate so much config, pools, etc and so much unnecessary files??
April 20, 2018, 09:38:38 PM
hy again
@doktor83 is SRBMiner showing AMD Invalid results aswell as Acceptept total shares ?
it would be verry helpful for me to know the share time in stats ...
thx again
@doktor83 is SRBMiner showing AMD Invalid results aswell as Acceptept total shares ?
it would be verry helpful for me to know the share time in stats ...
thx again
April 20, 2018, 06:55:17 PM
Hi there, I've had a problem with every miner around since the monero pow change, since the only miner I was able to use was Claymore 9.7beta without it crashing my display drivers.
I've tried xmr-stak, xmrig-amd, newer claymore's (No ASM bin found for my old card.) and about anything else that is supposed to work, I've compiled all the ones available and tried
with stock binaries on windows..
Display drivers crash no matter which version I try.. 14.4 15.7, 15.11-beta (for some reason this one is tricky to find.) Even tried the crimson edition beta which I've found out doesn't
actually include any assembler/disassembly tools for openCL.. Anywho..
Display card: AMD Ati Radeon 6530D (Evergeen or BeaverCreek as it picks it up everywhere.)
Cpu: AMD A6-3620 APU w/ the onboard 6530D
I've tried all 4 kernels out, all kill display, and of course can't get ADL to work, but I'd be highly surprised if that could even work at all anyways on this gpu.
All in all I really don't know what to do, or even try anymore.. I'd lend a hand if I could for getting what is needed to make these A-Series APUs to work. I haven't really seen anything in
the code for the other miners like xmrig/xmr-stak that would be a problem.. But I noted for some reason Claymore is posting exact driver versions for all of their releases, and wondering
how they are able to compile against them specifically, or if that just happens to be what they were using when compiling...
Any help is appreciated, and I'd love to get back to mining on my gpu, had a ton more shares and efficiency even at 42H/s and that's better than 0 since it's on 24/7 anyways.
Here are a couple screenshots for how it's acting and what it catches, and second is showing when display was killed and came back.
https://imgur.com/a/mBtohkv
Thanks, you really are saving miner's lives with this miner and I hope you keep at it.. So I tip my hat to you Doc.
I've tried xmr-stak, xmrig-amd, newer claymore's (No ASM bin found for my old card.) and about anything else that is supposed to work, I've compiled all the ones available and tried
with stock binaries on windows..
Display drivers crash no matter which version I try.. 14.4 15.7, 15.11-beta (for some reason this one is tricky to find.) Even tried the crimson edition beta which I've found out doesn't
actually include any assembler/disassembly tools for openCL.. Anywho..
Display card: AMD Ati Radeon 6530D (Evergeen or BeaverCreek as it picks it up everywhere.)
Cpu: AMD A6-3620 APU w/ the onboard 6530D
I've tried all 4 kernels out, all kill display, and of course can't get ADL to work, but I'd be highly surprised if that could even work at all anyways on this gpu.
All in all I really don't know what to do, or even try anymore.. I'd lend a hand if I could for getting what is needed to make these A-Series APUs to work. I haven't really seen anything in
the code for the other miners like xmrig/xmr-stak that would be a problem.. But I noted for some reason Claymore is posting exact driver versions for all of their releases, and wondering
how they are able to compile against them specifically, or if that just happens to be what they were using when compiling...
Any help is appreciated, and I'd love to get back to mining on my gpu, had a ton more shares and efficiency even at 42H/s and that's better than 0 since it's on 24/7 anyways.
Here are a couple screenshots for how it's acting and what it catches, and second is showing when display was killed and came back.
https://imgur.com/a/mBtohkv
Thanks, you really are saving miner's lives with this miner and I hope you keep at it.. So I tip my hat to you Doc.
hi, remove drivers with Display Driver Uninstaller, install 14.4 and try SRBMINER 1.4.6 --userkernel 4 for XMR use "normalv7"
and start with a very low intensity like 5, and only 1 thread
Ok well I used DDU and found the correct 14.4 drivers.. seems the last one wasn't actually installing for some reason.. anyways now all other miners work as well.
Only one issue really is the intensity setting, I can only go up to 2.0. 2.1 or higher kills display driver or gives the CL invalid buffer.. tried all 4 kernels and worksizes, kernel 2 seems to be the best
at 14H/s compared to 12-13H/s on 3 & 4 kernels. I was wondering if the gpu kernels having "256" in them as being the hash size? and if so, is there a way to lower or give a CLI option to change them or
maybe a 128 version? If that isn't the case, oh well.
(126 intensity seemed to be the optimal number for xmr-stak for some odd reason, also with a 35.9H/s which isn't to far off of the original claymore 9.7's 42H/s with low intensity mode on before v7.)
Does anyone know how to keep windows and everything from being totally unusable on all these miners?
(like clay's -li low intensity mode, which doesn't seem to be related at all to actual intensity.)
Best of luck to everyone.
easy, lower the intensity and problem solved
Claymore v9.7 allows me to have 320 hash threads -> 176 H/s and with low intensity option my PC is perfectly usable for other tasks.
All all other miners max out at 100 H/s and the PC is lagging hard! If I try to use intensity 320, the entire PC freezes.
And yes, I've tried 14.4 drivers.
Srbminer is helping you to use these old cards, so be patient.
Lowering intensity on an APU has no effect, It's more like it's either on or off.. When miner runs with even lowest intensity: it takes 7 seconds to pull up start bar. On higher intensity: 7 seconds to pull up start bar.
If I had a dedicated gpu card this probably isn't the case since they are not built into cpu. I've been playing around trying to make a kernel that runs 1/60th a second, kind of like an oscillation and it should be a fully usable desktop if the mode is enabled.. I'll keep folks posted, and if and when I get it done, I'll post the code enhancements somewhere for anyone interested.
April 20, 2018, 05:07:32 PM
New results
Cryptonight v7 hashrate of 2020 H/s vs 1960-1965 on xmr-stak (Adrenalin 18.3.4 drivers)
https://imgur.com/a/G9ZxD6Q
Vega 56 1475/1100 Mhz @ 881mV (bios mod to V64)
So far SRB miner has been rocking all Cryptonight algos for me on both Polaris and Vega.
Great job doktor83
Cryptonight v7 hashrate of 2020 H/s vs 1960-1965 on xmr-stak (Adrenalin 18.3.4 drivers)
https://imgur.com/a/G9ZxD6Q
Vega 56 1475/1100 Mhz @ 881mV (bios mod to V64)
So far SRB miner has been rocking all Cryptonight algos for me on both Polaris and Vega.
Great job doktor83
April 20, 2018, 04:17:18 PM
Hi there, I've had a problem with every miner around since the monero pow change, since the only miner I was able to use was Claymore 9.7beta without it crashing my display drivers.
I've tried xmr-stak, xmrig-amd, newer claymore's (No ASM bin found for my old card.) and about anything else that is supposed to work, I've compiled all the ones available and tried
with stock binaries on windows..
Display drivers crash no matter which version I try.. 14.4 15.7, 15.11-beta (for some reason this one is tricky to find.) Even tried the crimson edition beta which I've found out doesn't
actually include any assembler/disassembly tools for openCL.. Anywho..
Display card: AMD Ati Radeon 6530D (Evergeen or BeaverCreek as it picks it up everywhere.)
Cpu: AMD A6-3620 APU w/ the onboard 6530D
I've tried all 4 kernels out, all kill display, and of course can't get ADL to work, but I'd be highly surprised if that could even work at all anyways on this gpu.
All in all I really don't know what to do, or even try anymore.. I'd lend a hand if I could for getting what is needed to make these A-Series APUs to work. I haven't really seen anything in
the code for the other miners like xmrig/xmr-stak that would be a problem.. But I noted for some reason Claymore is posting exact driver versions for all of their releases, and wondering
how they are able to compile against them specifically, or if that just happens to be what they were using when compiling...
Any help is appreciated, and I'd love to get back to mining on my gpu, had a ton more shares and efficiency even at 42H/s and that's better than 0 since it's on 24/7 anyways.
Here are a couple screenshots for how it's acting and what it catches, and second is showing when display was killed and came back.
https://imgur.com/a/mBtohkv
Thanks, you really are saving miner's lives with this miner and I hope you keep at it.. So I tip my hat to you Doc.
I've tried xmr-stak, xmrig-amd, newer claymore's (No ASM bin found for my old card.) and about anything else that is supposed to work, I've compiled all the ones available and tried
with stock binaries on windows..
Display drivers crash no matter which version I try.. 14.4 15.7, 15.11-beta (for some reason this one is tricky to find.) Even tried the crimson edition beta which I've found out doesn't
actually include any assembler/disassembly tools for openCL.. Anywho..
Display card: AMD Ati Radeon 6530D (Evergeen or BeaverCreek as it picks it up everywhere.)
Cpu: AMD A6-3620 APU w/ the onboard 6530D
I've tried all 4 kernels out, all kill display, and of course can't get ADL to work, but I'd be highly surprised if that could even work at all anyways on this gpu.
All in all I really don't know what to do, or even try anymore.. I'd lend a hand if I could for getting what is needed to make these A-Series APUs to work. I haven't really seen anything in
the code for the other miners like xmrig/xmr-stak that would be a problem.. But I noted for some reason Claymore is posting exact driver versions for all of their releases, and wondering
how they are able to compile against them specifically, or if that just happens to be what they were using when compiling...
Any help is appreciated, and I'd love to get back to mining on my gpu, had a ton more shares and efficiency even at 42H/s and that's better than 0 since it's on 24/7 anyways.
Here are a couple screenshots for how it's acting and what it catches, and second is showing when display was killed and came back.
https://imgur.com/a/mBtohkv
Thanks, you really are saving miner's lives with this miner and I hope you keep at it.. So I tip my hat to you Doc.
hi, remove drivers with Display Driver Uninstaller, install 14.4 and try SRBMINER 1.4.6 --userkernel 4 for XMR use "normalv7"
and start with a very low intensity like 5, and only 1 thread
Ok well I used DDU and found the correct 14.4 drivers.. seems the last one wasn't actually installing for some reason.. anyways now all other miners work as well.
Only one issue really is the intensity setting, I can only go up to 2.0. 2.1 or higher kills display driver or gives the CL invalid buffer.. tried all 4 kernels and worksizes, kernel 2 seems to be the best
at 14H/s compared to 12-13H/s on 3 & 4 kernels. I was wondering if the gpu kernels having "256" in them as being the hash size? and if so, is there a way to lower or give a CLI option to change them or
maybe a 128 version? If that isn't the case, oh well.
(126 intensity seemed to be the optimal number for xmr-stak for some odd reason, also with a 35.9H/s which isn't to far off of the original claymore 9.7's 42H/s with low intensity mode on before v7.)
Does anyone know how to keep windows and everything from being totally unusable on all these miners?
(like clay's -li low intensity mode, which doesn't seem to be related at all to actual intensity.)
Best of luck to everyone.
easy, lower the intensity and problem solved
Claymore v9.7 allows me to have 320 hash threads -> 176 H/s and with low intensity option my PC is perfectly usable for other tasks.
All all other miners max out at 100 H/s and the PC is lagging hard! If I try to use intensity 320, the entire PC freezes.
And yes, I've tried 14.4 drivers.
Srbminer is helping you to use these old cards, so be patient.
April 20, 2018, 04:12:49 PM
Hi there, I've had a problem with every miner around since the monero pow change, since the only miner I was able to use was Claymore 9.7beta without it crashing my display drivers.
I've tried xmr-stak, xmrig-amd, newer claymore's (No ASM bin found for my old card.) and about anything else that is supposed to work, I've compiled all the ones available and tried
with stock binaries on windows..
Display drivers crash no matter which version I try.. 14.4 15.7, 15.11-beta (for some reason this one is tricky to find.) Even tried the crimson edition beta which I've found out doesn't
actually include any assembler/disassembly tools for openCL.. Anywho..
Display card: AMD Ati Radeon 6530D (Evergeen or BeaverCreek as it picks it up everywhere.)
Cpu: AMD A6-3620 APU w/ the onboard 6530D
I've tried all 4 kernels out, all kill display, and of course can't get ADL to work, but I'd be highly surprised if that could even work at all anyways on this gpu.
All in all I really don't know what to do, or even try anymore.. I'd lend a hand if I could for getting what is needed to make these A-Series APUs to work. I haven't really seen anything in
the code for the other miners like xmrig/xmr-stak that would be a problem.. But I noted for some reason Claymore is posting exact driver versions for all of their releases, and wondering
how they are able to compile against them specifically, or if that just happens to be what they were using when compiling...
Any help is appreciated, and I'd love to get back to mining on my gpu, had a ton more shares and efficiency even at 42H/s and that's better than 0 since it's on 24/7 anyways.
Here are a couple screenshots for how it's acting and what it catches, and second is showing when display was killed and came back.
https://imgur.com/a/mBtohkv
Thanks, you really are saving miner's lives with this miner and I hope you keep at it.. So I tip my hat to you Doc.
I've tried xmr-stak, xmrig-amd, newer claymore's (No ASM bin found for my old card.) and about anything else that is supposed to work, I've compiled all the ones available and tried
with stock binaries on windows..
Display drivers crash no matter which version I try.. 14.4 15.7, 15.11-beta (for some reason this one is tricky to find.) Even tried the crimson edition beta which I've found out doesn't
actually include any assembler/disassembly tools for openCL.. Anywho..
Display card: AMD Ati Radeon 6530D (Evergeen or BeaverCreek as it picks it up everywhere.)
Cpu: AMD A6-3620 APU w/ the onboard 6530D
I've tried all 4 kernels out, all kill display, and of course can't get ADL to work, but I'd be highly surprised if that could even work at all anyways on this gpu.
All in all I really don't know what to do, or even try anymore.. I'd lend a hand if I could for getting what is needed to make these A-Series APUs to work. I haven't really seen anything in
the code for the other miners like xmrig/xmr-stak that would be a problem.. But I noted for some reason Claymore is posting exact driver versions for all of their releases, and wondering
how they are able to compile against them specifically, or if that just happens to be what they were using when compiling...
Any help is appreciated, and I'd love to get back to mining on my gpu, had a ton more shares and efficiency even at 42H/s and that's better than 0 since it's on 24/7 anyways.
Here are a couple screenshots for how it's acting and what it catches, and second is showing when display was killed and came back.
https://imgur.com/a/mBtohkv
Thanks, you really are saving miner's lives with this miner and I hope you keep at it.. So I tip my hat to you Doc.
hi, remove drivers with Display Driver Uninstaller, install 14.4 and try SRBMINER 1.4.6 --userkernel 4 for XMR use "normalv7"
and start with a very low intensity like 5, and only 1 thread
Ok well I used DDU and found the correct 14.4 drivers.. seems the last one wasn't actually installing for some reason.. anyways now all other miners work as well.
Only one issue really is the intensity setting, I can only go up to 2.0. 2.1 or higher kills display driver or gives the CL invalid buffer.. tried all 4 kernels and worksizes, kernel 2 seems to be the best
at 14H/s compared to 12-13H/s on 3 & 4 kernels. I was wondering if the gpu kernels having "256" in them as being the hash size? and if so, is there a way to lower or give a CLI option to change them or
maybe a 128 version? If that isn't the case, oh well.
(126 intensity seemed to be the optimal number for xmr-stak for some odd reason, also with a 35.9H/s which isn't to far off of the original claymore 9.7's 42H/s with low intensity mode on before v7.)
Does anyone know how to keep windows and everything from being totally unusable on all these miners?
(like clay's -li low intensity mode, which doesn't seem to be related at all to actual intensity.)
Best of luck to everyone.
easy, lower the intensity and problem solved
Claymore v9.7 allows me to have 320 hash threads -> 176 H/s and with low intensity option my PC is perfectly usable for other tasks.
All all other miners max out at 100 H/s and the PC is lagging hard! If I try to use intensity 320, the entire PC freezes.
And yes, I've tried 14.4 drivers.
Srbminer is helping you to use these old cards, so be patient.
April 20, 2018, 04:06:13 PM
Hi there, I've had a problem with every miner around since the monero pow change, since the only miner I was able to use was Claymore 9.7beta without it crashing my display drivers.
I've tried xmr-stak, xmrig-amd, newer claymore's (No ASM bin found for my old card.) and about anything else that is supposed to work, I've compiled all the ones available and tried
with stock binaries on windows..
Display drivers crash no matter which version I try.. 14.4 15.7, 15.11-beta (for some reason this one is tricky to find.) Even tried the crimson edition beta which I've found out doesn't
actually include any assembler/disassembly tools for openCL.. Anywho..
Display card: AMD Ati Radeon 6530D (Evergeen or BeaverCreek as it picks it up everywhere.)
Cpu: AMD A6-3620 APU w/ the onboard 6530D
I've tried all 4 kernels out, all kill display, and of course can't get ADL to work, but I'd be highly surprised if that could even work at all anyways on this gpu.
All in all I really don't know what to do, or even try anymore.. I'd lend a hand if I could for getting what is needed to make these A-Series APUs to work. I haven't really seen anything in
the code for the other miners like xmrig/xmr-stak that would be a problem.. But I noted for some reason Claymore is posting exact driver versions for all of their releases, and wondering
how they are able to compile against them specifically, or if that just happens to be what they were using when compiling...
Any help is appreciated, and I'd love to get back to mining on my gpu, had a ton more shares and efficiency even at 42H/s and that's better than 0 since it's on 24/7 anyways.
Here are a couple screenshots for how it's acting and what it catches, and second is showing when display was killed and came back.
https://imgur.com/a/mBtohkv
Thanks, you really are saving miner's lives with this miner and I hope you keep at it.. So I tip my hat to you Doc.
I've tried xmr-stak, xmrig-amd, newer claymore's (No ASM bin found for my old card.) and about anything else that is supposed to work, I've compiled all the ones available and tried
with stock binaries on windows..
Display drivers crash no matter which version I try.. 14.4 15.7, 15.11-beta (for some reason this one is tricky to find.) Even tried the crimson edition beta which I've found out doesn't
actually include any assembler/disassembly tools for openCL.. Anywho..
Display card: AMD Ati Radeon 6530D (Evergeen or BeaverCreek as it picks it up everywhere.)
Cpu: AMD A6-3620 APU w/ the onboard 6530D
I've tried all 4 kernels out, all kill display, and of course can't get ADL to work, but I'd be highly surprised if that could even work at all anyways on this gpu.
All in all I really don't know what to do, or even try anymore.. I'd lend a hand if I could for getting what is needed to make these A-Series APUs to work. I haven't really seen anything in
the code for the other miners like xmrig/xmr-stak that would be a problem.. But I noted for some reason Claymore is posting exact driver versions for all of their releases, and wondering
how they are able to compile against them specifically, or if that just happens to be what they were using when compiling...
Any help is appreciated, and I'd love to get back to mining on my gpu, had a ton more shares and efficiency even at 42H/s and that's better than 0 since it's on 24/7 anyways.
Here are a couple screenshots for how it's acting and what it catches, and second is showing when display was killed and came back.
https://imgur.com/a/mBtohkv
Thanks, you really are saving miner's lives with this miner and I hope you keep at it.. So I tip my hat to you Doc.
hi, remove drivers with Display Driver Uninstaller, install 14.4 and try SRBMINER 1.4.6 --userkernel 4 for XMR use "normalv7"
and start with a very low intensity like 5, and only 1 thread
Ok well I used DDU and found the correct 14.4 drivers.. seems the last one wasn't actually installing for some reason.. anyways now all other miners work as well.
Only one issue really is the intensity setting, I can only go up to 2.0. 2.1 or higher kills display driver or gives the CL invalid buffer.. tried all 4 kernels and worksizes, kernel 2 seems to be the best
at 14H/s compared to 12-13H/s on 3 & 4 kernels. I was wondering if the gpu kernels having "256" in them as being the hash size? and if so, is there a way to lower or give a CLI option to change them or
maybe a 128 version? If that isn't the case, oh well.
(126 intensity seemed to be the optimal number for xmr-stak for some odd reason, also with a 35.9H/s which isn't to far off of the original claymore 9.7's 42H/s with low intensity mode on before v7.)
Does anyone know how to keep windows and everything from being totally unusable on all these miners?
(like clay's -li low intensity mode, which doesn't seem to be related at all to actual intensity.)
Best of luck to everyone.
easy, lower the intensity and problem solved
Claymore v9.7 allows me to have 320 hash threads -> 176 H/s and with low intensity option my PC is perfectly usable for other tasks.
All other miners max out at 100 H/s and the PC is lagging hard! If I try to use intensity 320, the entire PC freezes.
And yes, I've tried 14.4 drivers.
April 20, 2018, 03:58:02 PM
Hi there, I've had a problem with every miner around since the monero pow change, since the only miner I was able to use was Claymore 9.7beta without it crashing my display drivers.
I've tried xmr-stak, xmrig-amd, newer claymore's (No ASM bin found for my old card.) and about anything else that is supposed to work, I've compiled all the ones available and tried
with stock binaries on windows..
Display drivers crash no matter which version I try.. 14.4 15.7, 15.11-beta (for some reason this one is tricky to find.) Even tried the crimson edition beta which I've found out doesn't
actually include any assembler/disassembly tools for openCL.. Anywho..
Display card: AMD Ati Radeon 6530D (Evergeen or BeaverCreek as it picks it up everywhere.)
Cpu: AMD A6-3620 APU w/ the onboard 6530D
I've tried all 4 kernels out, all kill display, and of course can't get ADL to work, but I'd be highly surprised if that could even work at all anyways on this gpu.
All in all I really don't know what to do, or even try anymore.. I'd lend a hand if I could for getting what is needed to make these A-Series APUs to work. I haven't really seen anything in
the code for the other miners like xmrig/xmr-stak that would be a problem.. But I noted for some reason Claymore is posting exact driver versions for all of their releases, and wondering
how they are able to compile against them specifically, or if that just happens to be what they were using when compiling...
Any help is appreciated, and I'd love to get back to mining on my gpu, had a ton more shares and efficiency even at 42H/s and that's better than 0 since it's on 24/7 anyways.
Here are a couple screenshots for how it's acting and what it catches, and second is showing when display was killed and came back.
https://imgur.com/a/mBtohkv
Thanks, you really are saving miner's lives with this miner and I hope you keep at it.. So I tip my hat to you Doc.
I've tried xmr-stak, xmrig-amd, newer claymore's (No ASM bin found for my old card.) and about anything else that is supposed to work, I've compiled all the ones available and tried
with stock binaries on windows..
Display drivers crash no matter which version I try.. 14.4 15.7, 15.11-beta (for some reason this one is tricky to find.) Even tried the crimson edition beta which I've found out doesn't
actually include any assembler/disassembly tools for openCL.. Anywho..
Display card: AMD Ati Radeon 6530D (Evergeen or BeaverCreek as it picks it up everywhere.)
Cpu: AMD A6-3620 APU w/ the onboard 6530D
I've tried all 4 kernels out, all kill display, and of course can't get ADL to work, but I'd be highly surprised if that could even work at all anyways on this gpu.
All in all I really don't know what to do, or even try anymore.. I'd lend a hand if I could for getting what is needed to make these A-Series APUs to work. I haven't really seen anything in
the code for the other miners like xmrig/xmr-stak that would be a problem.. But I noted for some reason Claymore is posting exact driver versions for all of their releases, and wondering
how they are able to compile against them specifically, or if that just happens to be what they were using when compiling...
Any help is appreciated, and I'd love to get back to mining on my gpu, had a ton more shares and efficiency even at 42H/s and that's better than 0 since it's on 24/7 anyways.
Here are a couple screenshots for how it's acting and what it catches, and second is showing when display was killed and came back.
https://imgur.com/a/mBtohkv
Thanks, you really are saving miner's lives with this miner and I hope you keep at it.. So I tip my hat to you Doc.
hi, remove drivers with Display Driver Uninstaller, install 14.4 and try SRBMINER 1.4.6 --userkernel 4 for XMR use "normalv7"
and start with a very low intensity like 5, and only 1 thread
Ok well I used DDU and found the correct 14.4 drivers.. seems the last one wasn't actually installing for some reason.. anyways now all other miners work as well.
Only one issue really is the intensity setting, I can only go up to 2.0. 2.1 or higher kills display driver or gives the CL invalid buffer.. tried all 4 kernels and worksizes, kernel 2 seems to be the best
at 14H/s compared to 12-13H/s on 3 & 4 kernels. I was wondering if the gpu kernels having "256" in them as being the hash size? and if so, is there a way to lower or give a CLI option to change them or
maybe a 128 version? If that isn't the case, oh well.
(126 intensity seemed to be the optimal number for xmr-stak for some odd reason, also with a 35.9H/s which isn't to far off of the original claymore 9.7's 42H/s with low intensity mode on before v7.)
Does anyone know how to keep windows and everything from being totally unusable on all these miners?
(like clay's -li low intensity mode, which doesn't seem to be related at all to actual intensity.)
Best of luck to everyone.
easy, lower the intensity and problem solved
April 20, 2018, 03:50:15 PM
Hi there, I've had a problem with every miner around since the monero pow change, since the only miner I was able to use was Claymore 9.7beta without it crashing my display drivers.
I've tried xmr-stak, xmrig-amd, newer claymore's (No ASM bin found for my old card.) and about anything else that is supposed to work, I've compiled all the ones available and tried
with stock binaries on windows..
Display drivers crash no matter which version I try.. 14.4 15.7, 15.11-beta (for some reason this one is tricky to find.) Even tried the crimson edition beta which I've found out doesn't
actually include any assembler/disassembly tools for openCL.. Anywho..
Display card: AMD Ati Radeon 6530D (Evergeen or BeaverCreek as it picks it up everywhere.)
Cpu: AMD A6-3620 APU w/ the onboard 6530D
I've tried all 4 kernels out, all kill display, and of course can't get ADL to work, but I'd be highly surprised if that could even work at all anyways on this gpu.
All in all I really don't know what to do, or even try anymore.. I'd lend a hand if I could for getting what is needed to make these A-Series APUs to work. I haven't really seen anything in
the code for the other miners like xmrig/xmr-stak that would be a problem.. But I noted for some reason Claymore is posting exact driver versions for all of their releases, and wondering
how they are able to compile against them specifically, or if that just happens to be what they were using when compiling...
Any help is appreciated, and I'd love to get back to mining on my gpu, had a ton more shares and efficiency even at 42H/s and that's better than 0 since it's on 24/7 anyways.
Here are a couple screenshots for how it's acting and what it catches, and second is showing when display was killed and came back.
https://imgur.com/a/mBtohkv
Thanks, you really are saving miner's lives with this miner and I hope you keep at it.. So I tip my hat to you Doc.
I've tried xmr-stak, xmrig-amd, newer claymore's (No ASM bin found for my old card.) and about anything else that is supposed to work, I've compiled all the ones available and tried
with stock binaries on windows..
Display drivers crash no matter which version I try.. 14.4 15.7, 15.11-beta (for some reason this one is tricky to find.) Even tried the crimson edition beta which I've found out doesn't
actually include any assembler/disassembly tools for openCL.. Anywho..
Display card: AMD Ati Radeon 6530D (Evergeen or BeaverCreek as it picks it up everywhere.)
Cpu: AMD A6-3620 APU w/ the onboard 6530D
I've tried all 4 kernels out, all kill display, and of course can't get ADL to work, but I'd be highly surprised if that could even work at all anyways on this gpu.
All in all I really don't know what to do, or even try anymore.. I'd lend a hand if I could for getting what is needed to make these A-Series APUs to work. I haven't really seen anything in
the code for the other miners like xmrig/xmr-stak that would be a problem.. But I noted for some reason Claymore is posting exact driver versions for all of their releases, and wondering
how they are able to compile against them specifically, or if that just happens to be what they were using when compiling...
Any help is appreciated, and I'd love to get back to mining on my gpu, had a ton more shares and efficiency even at 42H/s and that's better than 0 since it's on 24/7 anyways.
Here are a couple screenshots for how it's acting and what it catches, and second is showing when display was killed and came back.
https://imgur.com/a/mBtohkv
Thanks, you really are saving miner's lives with this miner and I hope you keep at it.. So I tip my hat to you Doc.
hi, remove drivers with Display Driver Uninstaller, install 14.4 and try SRBMINER 1.4.6 --userkernel 4 for XMR use "normalv7"
and start with a very low intensity like 5, and only 1 thread
Ok well I used DDU and found the correct 14.4 drivers.. seems the last one wasn't actually installing for some reason.. anyways now all other miners work as well.
Only one issue really is the intensity setting, I can only go up to 2.0. 2.1 or higher kills display driver or gives the CL invalid buffer.. tried all 4 kernels and worksizes, kernel 2 seems to be the best
at 14H/s compared to 12-13H/s on 3 & 4 kernels. I was wondering if the gpu kernels having "256" in them as being the hash size? and if so, is there a way to lower or give a CLI option to change them or
maybe a 128 version? If that isn't the case, oh well.
(126 intensity seemed to be the optimal number for xmr-stak for some odd reason, also with a 35.9H/s which isn't to far off of the original claymore 9.7's 42H/s with low intensity mode on before v7.)
Does anyone know how to keep windows and everything from being totally unusable on all these miners?
(like clay's -li low intensity mode, which doesn't seem to be related at all to actual intensity.)
Best of luck to everyone.
April 20, 2018, 03:48:34 PM
hello dok, in my 6950 I get 355 h / s with I 54.5 W 16 with OC 840/1250 usekernel 3, 90% similar to claymore 9.7, sincerely I would like you to explain how the usekernel option works to better understand the configuration, thanks and congratulations for the work done to these old gpu.
I also have a 6870 with I 22.5 W 8 and I get 170 ~ 200 h / s with OC 950/1150 usekernel 3, with claymore 9.7 I get 250, I think it can improve a bit, thank.
If you need access to my platform to perform tests, I'm willing to help.
I also have a 6870 with I 22.5 W 8 and I get 170 ~ 200 h / s with OC 950/1150 usekernel 3, with claymore 9.7 I get 250, I think it can improve a bit, thank.
If you need access to my platform to perform tests, I'm willing to help.
simple, those are opencl kernels. 1 is for gcn cards, 2 is same kernel like 1 but changed a few rhing to make it work on old cards, 3 and 4 is something i was experimenting.
Thanks DOK, do you recommend using kernel 2 for those cards?
April 20, 2018, 03:45:09 PM
hello dok, in my 6950 I get 355 h / s with I 54.5 W 16 with OC 840/1250 usekernel 3, 90% similar to claymore 9.7, sincerely I would like you to explain how the usekernel option works to better understand the configuration, thanks and congratulations for the work done to these old gpu.
I also have a 6870 with I 22.5 W 8 and I get 170 ~ 200 h / s with OC 950/1150 usekernel 3, with claymore 9.7 I get 250, I think it can improve a bit, thank.
If you need access to my platform to perform tests, I'm willing to help.
I also have a 6870 with I 22.5 W 8 and I get 170 ~ 200 h / s with OC 950/1150 usekernel 3, with claymore 9.7 I get 250, I think it can improve a bit, thank.
If you need access to my platform to perform tests, I'm willing to help.
simple, those are opencl kernels. 1 is for gcn cards, 2 is same kernel like 1 but changed a few rhing to make it work on old cards, 3 and 4 is something i was experimenting.
April 20, 2018, 03:21:53 PM
hello dok, in my 6950 I get 355 h / s with I 54.5 W 16 with OC 840/1250 usekernel 3, 90% similar to claymore 9.7, sincerely I would like you to explain how the usekernel option works to better understand the configuration, thanks and congratulations for the work done to these old gpu.
I also have a 6870 with I 22.5 W 8 and I get 170 ~ 200 h / s with OC 950/1150 usekernel 3, with claymore 9.7 I get 250, I think it can improve a bit, thank.
If you need access to my platform to perform tests, I'm willing to help.
I also have a 6870 with I 22.5 W 8 and I get 170 ~ 200 h / s with OC 950/1150 usekernel 3, with claymore 9.7 I get 250, I think it can improve a bit, thank.
If you need access to my platform to perform tests, I'm willing to help.
April 20, 2018, 03:20:26 PM
hy
after fail mining at dev fee pool, 1 mimute nothing and after this duplicat share...
https://jpst.it/1e0PC
after fail mining at dev fee pool, 1 mimute nothing and after this duplicat share...
https://jpst.it/1e0PC
download 1.4.6, i added duplicate share protection.
ok thx
and why 1 min down time ? it tried 1 min to connect to devfee and because it couldnt it switched back to mine for you
April 20, 2018, 03:18:52 PM
hy
after fail mining at dev fee pool, 1 mimute nothing and after this duplicat share...
https://jpst.it/1e0PC
after fail mining at dev fee pool, 1 mimute nothing and after this duplicat share...
https://jpst.it/1e0PC
download 1.4.6, i added duplicate share protection.
ok thx
and why 1 min down time ? try in few min again would be > than 1 min to nothing ?thx for your great work !
April 20, 2018, 03:07:05 PM
hy
after fail mining at dev fee pool, 1 mimute nothing and after this duplicat share...
https://jpst.it/1e0PC
after fail mining at dev fee pool, 1 mimute nothing and after this duplicat share...
https://jpst.it/1e0PC
download 1.4.6, i added duplicate share protection.
April 20, 2018, 03:01:09 PM
hy
after fail mining at dev fee pool, 1 mimute nothing and after this duplicat share...
https://jpst.it/1e0PC
after fail mining at dev fee pool, 1 mimute nothing and after this duplicat share...
https://jpst.it/1e0PC
Jump to: