SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 334.

stsocrat

newbie

Activity: 24

Merit: 0

Wanna more than 200 at RX550 2Gb Buffin unlocked!
Please, help with config((

Boss_One

newbie

Activity: 14

Merit: 0

Quote from: RaidoP2 on April 12, 2018, 08:19:51 AM

Quote from: Boss_One on April 12, 2018, 08:16:18 AM

Quote from: Boss_One on April 10, 2018, 03:02:36 PM

Hello
I'm using 2 old RADEON 6950 on 2 different computer. It's the 1st miner could hash from the Monero V7 fork and I'm happy to discover this miner!

I have a hashrate problem, I can't reach better than 145 H / s. Before the Fork I was doing 350 H / s with this card with other miner.

I've tried the automatic intensity, and a lot of between 0 - 300 i've got the max with intensity 15
Is this card compatible with this miner ? Already it is stable and there is HASHRATE. Which is not the case with any other minor i've tried ...

I hope you could help me with my 2 old radeon card.

I'm Using Windows 8.1 X64
The last WHQL Driver for this card "15.7.1"

There is some recommendation about the driver revision or other tips to Hash more with that card ?

Thank you for your work

@doktor83

I quoted myself

Any idea about this card ?

The blockchain driver did'nt work and the laster beta drivers didn't work too.
So only the WHQL 15.7.1 driver works at low hasrate.

Since the hard fork claymore doesn't support older card than 6xxx, i think u have a lot of old miner could be interested by your miner, i saw same problem on other forum as mine with this 6xxx card can't hash, SRB Miner is the only one could hash with my card.

I hope you could help me.

The blockchain and latest drivers won't work with this card because it is a pre-GCN card. Probably need custom timings in BIOS and overclock memory to get better hashrate.

Ok and what about the hasrate 350 before hard fork ==> 145h/s after ? Sad

I know it's a very oldcard, but 700h/s on two card was prety good for those grandma Grin

i'm at the maximum OC AMD Override let me put : Gpu 800@840 Memory 1250@1350, Memory speed didn't impact the hashrate. It's seems the miner didn't take all the GPU "powerfull"

RaidoP2

newbie

Activity: 61

Merit: 0

Quote from: Boss_One on April 12, 2018, 08:16:18 AM

Quote from: Boss_One on April 10, 2018, 03:02:36 PM

Hello
I'm using 2 old RADEON 6950 on 2 different computer. It's the 1st miner could hash from the Monero V7 fork and I'm happy to discover this miner!

I have a hashrate problem, I can't reach better than 145 H / s. Before the Fork I was doing 350 H / s with this card with other miner.

I've tried the automatic intensity, and a lot of between 0 - 300 i've got the max with intensity 15
Is this card compatible with this miner ? Already it is stable and there is HASHRATE. Which is not the case with any other minor i've tried ...

I hope you could help me with my 2 old radeon card.

I'm Using Windows 8.1 X64
The last WHQL Driver for this card "15.7.1"

There is some recommendation about the driver revision or other tips to Hash more with that card ?

Thank you for your work

@doktor83

I quoted myself

Any idea about this card ?

The blockchain driver did'nt work and the laster beta drivers didn't work too.
So only the WHQL 15.7.1 driver works at low hasrate.

Since the hard fork claymore doesn't support older card than 6xxx, i think u have a lot of old miner could be interested by your miner, i saw same problem on other forum as mine with this 6xxx card can't hash, SRB Miner is the only one could hash with my card.

I hope you could help me.

The blockchain and latest drivers won't work with this card because it is a pre-GCN card. Probably need custom timings in BIOS and overclock memory to get better hashrate.

Boss_One

newbie

Activity: 14

Merit: 0

Quote from: Boss_One on April 10, 2018, 03:02:36 PM

Hello
I'm using 2 old RADEON 6950 on 2 different computer. It's the 1st miner could hash from the Monero V7 fork and I'm happy to discover this miner!

I have a hashrate problem, I can't reach better than 145 H / s. Before the Fork I was doing 350 H / s with this card with other miner.

I've tried the automatic intensity, and a lot of between 0 - 300 i've got the max with intensity 15
Is this card compatible with this miner ? Already it is stable and there is HASHRATE. Which is not the case with any other minor i've tried ...

I hope you could help me with my 2 old radeon card.

I'm Using Windows 8.1 X64
The last WHQL Driver for this card "15.7.1"

There is some recommendation about the driver revision or other tips to Hash more with that card ?

Thank you for your work

@doktor83

I quoted myself

Any idea about this card ?

The blockchain driver did'nt work and the laster beta drivers didn't work too.
So only the WHQL 15.7.1 driver works at low hasrate.

Since the hard fork claymore doesn't support older card than 6xxx, i think u have a lot of old miner could be interested by your miner, i saw same problem on other forum as mine with this 6xxx card can't hash, SRB Miner is the only one could hash with my card.

I've tried 1.3.0 /1.3.1 / and 1.3.2 version with same result.

I hope you could help me. Huh

inv1s1bl3

newbie

Activity: 65

Merit: 0

Dok, is there a way to set a constant difficulty? I think I am getting better hashrate when I am mining on lower difficulty tho, that's why I am asking Cheesy

rig1313

newbie

Activity: 16

Merit: 0

Hello Doctor

I have these cards on Asrock h110 13slots

2*Rx 560 4GB--------500 h/s
3*Rx 470 4GB--------670 h/s
3*Rx 470 8GB--------880 h/s
Rx 480 8GB----------1050 h/s
Rx 570 4GB-----------700 h/s

my hashrate dropping alot

its not intensity problem , ive tried alot of numbers with/without double_threads

swinging hashrate -20%

i set virtual memory 100 GB

tenmoi

newbie

Activity: 59

Merit: 0

Doktor, don’t know if this is possible but can you let the gpu run idle when there aren’t any jobs from the pool? Less heat and power waste. Huh

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: peterboy1 on April 12, 2018, 07:05:09 AM

but i have 2 rigs. rig 1 is not affected. only rig 2. here are my specs:

rig 1:
sap rx 570 nitro+ 4gb (samsung)

rig 2:
powercolor rx 570 red devil 4gb (hynix&elpida)

Now that is really strange, both cards are 570 4g, i will check what is happening.
Regarding hw errors, that means the result GPU returned could not be validated on the CPU, because it's wrong.

If you have a few errors don't worry, but if you got a lot i would start with lowering intensity.
Intensity can be a decimal number, so for example if you now use 35, you can try 34.5. If not satisfying then 34 and so on.

tenmoi

newbie

Activity: 59

Merit: 0

Quote from: ipe4enko on April 12, 2018, 06:55:28 AM

Miner 1.3.2 cant't shutdown if crash detected. System also can't reboot in this case. Only reset can help.
CPU usage in this case is 99%

Also in version 1.3.2 i can't see which card is crashed.

Yes. In claymore for eth , the log file tells you which card hangs so you can deal with it.

peterboy1

newbie

Activity: 168

Merit: 0

Quote from: doktor83 on April 12, 2018, 06:46:27 AM

Quote from: peterboy1 on April 12, 2018, 06:43:13 AM

Quote from: doktor83 on April 12, 2018, 05:17:16 AM

post your 1.3.1 conf , and 1.3.2 conf here please
nothing was done in new version regarding hashing speeds, only some re-work of auto intensity settings.
I had to lower a little bit auto settings cause lot of users get false-good intensity value and crashing.

So you just need to increase the auto intensity value you get and insert that value instead 0 in the config file.

https://image.ibb.co/jW97nH/asa323333.jpg

im on a manual gpu conf before and after the latest update. latest update reduced speed. i dont understand neither.

i will check it then. Which algo? Heavy?

heavy sir.

but i have 2 rigs. rig 1 is not affected. only rig 2. here are my specs:

rig 1:
sap rx 570 nitro+ 4gb (samsung)

rig 2:
powercolor rx 570 red devil 4gb (hynix&elpida)

anyway, can the logs be improved? i saw gpu crash, but not clear which gpu.

and if ever you received hw errors on logs (this one indicates which gpu), what to do? reduce cclock or memclock or intensity?

thanks

daotienao1217

newbie

Activity: 15

Merit: 0

Quote from: bovineplane on April 12, 2018, 05:05:03 AM

Quote from: daotienao1217 on April 12, 2018, 04:58:41 AM

Does SRBminer v1.3.2 run the new IPBC V3 algorithm?
http://54.37.94.172/pool/

On testnet it runs fine.

What algorithm options do I have to run on the testnet?

ipe4enko

newbie

Activity: 34

Merit: 0

Miner 1.3.2 cant't shutdown if crash detected. System also can't reboot in this case. Only reset can help.
CPU usage in this case is 99%

Also in version 1.3.2 i can't see which card is crashed.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: Nss75 on April 12, 2018, 06:21:34 AM

Hello doktor,
My hashrate still drops with vega 64, even with 100% fan config in afterburner (8500 to 6000h/s for 6 gpu) after few minutes.
Do you think it is better to use overdrive for this or it will change nothing?

Is it a driver problem? I have Amd Crimson 016.001.001.000 , should i change?

Last question: i can set my mem clock to 1100 max, after this, it reboot my computer, is there a way to go higher, or will it change nothing?

Thanks a lot for your help!

I don't have Vega cards but i found on many many places on the net that vegas hashrate drops, so its not a miner related problem.
Maybe someone here who has Vega cards can help you ?

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: peterboy1 on April 12, 2018, 06:43:13 AM

Quote from: doktor83 on April 12, 2018, 05:17:16 AM

post your 1.3.1 conf , and 1.3.2 conf here please
nothing was done in new version regarding hashing speeds, only some re-work of auto intensity settings.
I had to lower a little bit auto settings cause lot of users get false-good intensity value and crashing.

So you just need to increase the auto intensity value you get and insert that value instead 0 in the config file.

im on a manual gpu conf before and after the latest update. latest update reduced speed. i dont understand neither.

i will check it then. Which algo? Heavy?

peterboy1

newbie

Activity: 168

Merit: 0

Quote from: doktor83 on April 12, 2018, 05:17:16 AM

post your 1.3.1 conf , and 1.3.2 conf here please
nothing was done in new version regarding hashing speeds, only some re-work of auto intensity settings.
I had to lower a little bit auto settings cause lot of users get false-good intensity value and crashing.

So you just need to increase the auto intensity value you get and insert that value instead 0 in the config file.

https://image.ibb.co/jW97nH/asa323333.jpg

im on a manual gpu conf before and after the latest update. latest update reduced speed. i dont understand neither.

Nss75

newbie

Activity: 21

Merit: 0

Hello doktor,
My hashrate still drops with vega 64, even with 100% fan config in afterburner (8500 to 6000h/s for 6 gpu) after few minutes.
Do you think it is better to use overdrive for this or it will change nothing?

Is it a driver problem? I have Amd Crimson 016.001.001.000 , should i change?

Last question: i can set my mem clock to 1100 max, after this, it reboot my computer, is there a way to go higher, or will it change nothing?

Thanks a lot for your help!

alczaty

newbie

Activity: 38

Merit: 0

Quote from: doktor83 on April 12, 2018, 05:37:03 AM

ok, now --listdevices please

https://imgur.com/a/sw1A3

doktor83

hero member

Activity: 2548

Merit: 626

i still need that log file to help you

WhyMe

sr. member

Activity: 661

Merit: 250

Problem about devfee is not really a devfee problem ...
I now run rigs with the nofee option and I always have the problem : miner stop founding share ...

zeii

newbie

Activity: 41

Merit: 0

Quote from: doktor83 on April 12, 2018, 05:18:10 AM

Quote from: zeii on April 12, 2018, 03:49:16 AM

Excuse me,noob question.
where to put "--logfile filename"?
this is my bat file.

Quote

@echo off

cls
SETLOCAL EnableExtensions
set EXE=SRBMiner-CN.exe

:START
FOR /F %%x IN ('tasklist /NH /FI "IMAGENAME eq %EXE%"') DO IF %%x == %EXE% goto RUNNING
%EXE% -c config.txt --logfile log.txt
TIMEOUT /T 5 /NOBREAK
goto START
:RUNNING
echo "%EXE% is already running"
pause

I bolded it for you

Thank you very much. Cheesy

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 334. (Read 237263 times)