SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 337.

peterboy1

newbie

Activity: 168

Merit: 0

Quote from: Vers on April 11, 2018, 10:10:42 AM

I'm tested 1.3.2 update. For 8Gb Polaris hashrate remained at the same level - 1100 h/s. 4GB Polaris lost performance -725 h/s against 762 h/s in 1.3.1. 4Gb Hawaii productive same level - 670-690 h/s.

same is happening with me.

i dont know, it doesnt makes sense. i never changed any settings.

rig 1:
power color rx 570 red devil 4gb x 13pcs
previous versions: total of 10,400 h/s (cn heavy)
latest: 10,200 h/s (cn heavy)

rig 2:
sap rx570 nitro+ 4gb x 13pcs
nothing has changed

rambetiko

member

Activity: 189

Merit: 10

Quote from: rssw on April 11, 2018, 03:44:12 PM

Tried previous versions on 8*Vega64 rig under 18.3.4 driver, better hashrate than other miners (2000 h/s @ 160W per card)
Today v1.3.2 fixed temp & RPM readings on my rig, stability seems very good
Great job ! Cool

Thanks !

heavy algo or v7 ?

what is config? gpu, mem vs

Nss75

newbie

Activity: 21

Merit: 0

Quote from: heavyarms1912 on April 11, 2018, 03:50:03 PM

Quote from: Nss75 on April 11, 2018, 03:03:55 PM

Well with the vega's 64 i can get 1500h/s max per card with SRBminer wich i think is good now.
Max is 8700kh/s for 6 vega's.

The problem is: after 30 minutes of SRBminer running it drops of 2kh/s (from 8700 to 6500) suddenly, and i don't know why.

Any idea is welcomed ^^

Thanks guys!

That's problem with Vega drivers iirc. Not the miner. Did you try other miners and the hashrate didn't drop?

With other miners it is stable: Around 6500h/s directly and stays.
For SRB, begins at 8500h/s and drops to 6500h/s after 15min, but i don't know why!

I use Xmr-stack-aeon since one hour now, and it seems stable at 8000h/s.

nitrobg

member

Activity: 413

Merit: 17

I don't know why, but 1.3.2 tried to run my Aorus 580 4GB at 130ish intensity with "double_threads" : true, which caused a crash-reboot miner loop. Manually adjusted it to 54 and it is fine now.

vmafioz

newbie

Activity: 4

Merit: 0

Hello. Help, what can this mistake be !?
Error every 5-10 minutes.

Quote

[2018-04-11 23:48:17] GPU0: 903.0 H/S [T: 53c, RPM: 1782]
[2018-04-11 23:48:17] GPU1: 726.0 H/S [T: 56c, RPM: 1941]
[2018-04-11 23:48:17] GPU2: 893.0 H/S [T: 52c, RPM: 1673]
[2018-04-11 23:48:17] GPU3: 659.0 H/S [T: 57c, RPM: 1853]
[2018-04-11 23:48:17] Total: 3181.0 H/S
[2018-04-11 23:50:07] ERROR : ╙фpыxээ√щ їюёЄ яЁшэєфшЄxы№эю ЁpчюЁтpы ёє∙xёЄтє■∙xx яюфъы■ўxэшx.
[2018-04-11 23:50:07] Connection to pool lost. Reconnecting in 5 seconds.

alkoms

newbie

Activity: 1

Merit: 0

wallet binance settings for monero. What is my wallet? wallet or payment id. on xmr.nanopool.org

thank you and excuse me for my english

heavyarms1912

full member

Activity: 729

Merit: 114

Quote from: Nss75 on April 11, 2018, 03:03:55 PM

Well with the vega's 64 i can get 1500h/s max per card with SRBminer wich i think is good now.
Max is 8700kh/s for 6 vega's.

The problem is: after 30 minutes of SRBminer running it drops of 2kh/s (from 8700 to 6500) suddenly, and i don't know why.

Any idea is welcomed ^^

Thanks guys!

That's problem with Vega drivers iirc. Not the miner. Did you try other miners and the hashrate didn't drop?

Nss75

newbie

Activity: 21

Merit: 0

well.... no stability for me Wink

rssw

newbie

Activity: 3

Merit: 0

Tried previous versions on 8*Vega64 rig under 18.3.4 driver, better hashrate than other miners (2000 h/s @ 160W per card)
Today v1.3.2 fixed temp & RPM readings on my rig, stability seems very good
Great job ! Cool

Thanks !

Nss75

newbie

Activity: 21

Merit: 0

Well with the vega's 64 i can get 1500h/s max per card with SRBminer wich i think is good now.
Max is 8700kh/s for 6 vega's.

The problem is: after 30 minutes of SRBminer running it drops of 2kh/s (from 8700 to 6500) suddenly, and i don't know why.

Any idea is welcomed ^^

Thanks guys!

peterboy1

newbie

Activity: 168

Merit: 0

what to do if you receive an hw errors?

do i need to downclock cclock or mclock or intensity?

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: ?? on ??

Hi

when i try to just one gpu:

"gpu_conf" :
[

{ "id" : 3, "intensity" : 120, "worksize" : 16, "threads" : 2},
]
}

i get an error this error:

Error CL_INVALID_DEVICE when calling clCreateContext

however if i run all 4..it works. can you please assist me on getting one gpu only to mine?

thanks

Hi , can you download latest version and try? It should be fixed

minahan24

newbie

Activity: 23

Merit: 0

Quote from: Larvitar on April 11, 2018, 12:47:58 PM

Unafortunately I don't have specific timings to cryptonight, so I'm using the same I did to Ethash. For Cryptonight V7 the great surprise was RX570 4GB Elpida, getting 1000H/s at 1230/2030. It's quite impressive for me.

I may have to try this one. I'm running 1300/2000 on V7 and getting 952 h/s on my RX570 4GB Elpida. Have you tried Heavy on RX570 4gb Elpida?

ZaebaloRegitsa4

jr. member

Activity: 64

Merit: 1

The version 1.3.2 stopped running through start.bat..

Larvitar

jr. member

Activity: 196

Merit: 1

Quote from: heavyarms1912 on April 11, 2018, 12:30:18 PM

Quote from: inv1s1bl3 on April 11, 2018, 11:22:32 AM

Quote from: heavyarms1912 on April 11, 2018, 08:56:58 AM

Quote from: inv1s1bl3 on April 11, 2018, 08:39:00 AM

Okay, so in comparison with xmrig's speed 3,5kh, with this SBRMiner my RX580s are hashing 820h/s on cryptonight heavy!!! Incredible performance! I am currently with intensity 32, because if I get the intensity higher, I have noticed that after some time some cards start hashing around 550h/s(dropping by 300h) .
Running stable with 4150h/s on my 5 cards @ 550W from the wall. Great work man, hands down!

4gb or 8gb? I read 8gb go over 1k on CN-Heavy.

It may give such hash, but my cards are modded for the ethash algo and as far as I read, the timings for cryptonight should be a bit different. I am now looking for a guide or a site from which I will be able to get my hands on such a BIOS mod and I will try then Cheesy

Otherwise still pretty amazing performance, cannot deny that!

P.S - Cards are 8GB Sapphire Nitro+ Special Editions.

Which memory type? Yup, cryptonight works better with different timing straps than ETH.
For 8gb cards you should try the same intensities that you've used on cryptonight.

Also a generic tip. If you are not actively monitoring GPU parameters close apps like HWInfo64, gpu-z or afterburner or change the polling rate to 3sec,5sec.

I'm using the "over and over" utilized Ubermix 3.1, intensity 57 + 2 threads and i'm getting 1100~1150h/s in my Asus RX580 8GB (Samsung memory) at 1280/2010. Try pushing intensity to the limit and then reduce to find the perfect sweet spot. Remember: Cryptonight-heavy is a really different algorithm comparing to Cryptonight V7. The same board I can reach 1100H/s+ in Heavy can do only 1053H/s in V7 (with the best intensity for both).

Unafortunately I don't have specific timings to cryptonight, so I'm using the same I did to Ethash. For Cryptonight V7 the great surprise was RX570 4GB Elpida, getting 1000H/s at 1230/2030. It's quite impressive for me.

heavyarms1912

full member

Activity: 729

Merit: 114

Quote from: inv1s1bl3 on April 11, 2018, 11:22:32 AM

Quote from: heavyarms1912 on April 11, 2018, 08:56:58 AM

Quote from: inv1s1bl3 on April 11, 2018, 08:39:00 AM

Okay, so in comparison with xmrig's speed 3,5kh, with this SBRMiner my RX580s are hashing 820h/s on cryptonight heavy!!! Incredible performance! I am currently with intensity 32, because if I get the intensity higher, I have noticed that after some time some cards start hashing around 550h/s(dropping by 300h) .
Running stable with 4150h/s on my 5 cards @ 550W from the wall. Great work man, hands down!

4gb or 8gb? I read 8gb go over 1k on CN-Heavy.

It may give such hash, but my cards are modded for the ethash algo and as far as I read, the timings for cryptonight should be a bit different. I am now looking for a guide or a site from which I will be able to get my hands on such a BIOS mod and I will try then Cheesy

Otherwise still pretty amazing performance, cannot deny that!

P.S - Cards are 8GB Sapphire Nitro+ Special Editions.

Which memory type? Yup, cryptonight works better with different timing straps than ETH.
For 8gb cards you should try the same intensities that you've used on cryptonight.

Also a generic tip. If you are not actively monitoring GPU parameters close apps like HWInfo64, gpu-z or afterburner or change the polling rate to 3sec,5sec.

alczaty

newbie

Activity: 38

Merit: 0

i don't know how, but at CNheavy my rx 580 8gb gives me more hash then at CNv7

inv1s1bl3

newbie

Activity: 65

Merit: 0

Quote from: heavyarms1912 on April 11, 2018, 08:56:58 AM

Quote from: inv1s1bl3 on April 11, 2018, 08:39:00 AM

Okay, so in comparison with xmrig's speed 3,5kh, with this SBRMiner my RX580s are hashing 820h/s on cryptonight heavy!!! Incredible performance! I am currently with intensity 32, because if I get the intensity higher, I have noticed that after some time some cards start hashing around 550h/s(dropping by 300h) .
Running stable with 4150h/s on my 5 cards @ 550W from the wall. Great work man, hands down!

4gb or 8gb? I read 8gb go over 1k on CN-Heavy.

It may give such hash, but my cards are modded for the ethash algo and as far as I read, the timings for cryptonight should be a bit different. I am now looking for a guide or a site from which I will be able to get my hands on such a BIOS mod and I will try then Cheesy

Otherwise still pretty amazing performance, cannot deny that!

P.S - Cards are 8GB Sapphire Nitro+ Special Editions.

bobben2

full member

Activity: 279

Merit: 104

Quote from: Vers on April 11, 2018, 10:51:32 AM

Quote from: bobben2 on April 11, 2018, 10:39:16 AM

Some early test result with version 1.3.2
My 2 x RX 574 test rig now hashing at 913+914 H/s. And both GPUs temp/RPM are showing.
So far all is well. Thank you, dev Cheesy

Config:

GPUs running at 1200/2000 MSI with Hynix mem.

"gpu_conf" :
[
{ "id" : 0, "intensity" : 56, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 56, "worksize" : 8, "threads" : 2}
]

Algo heavy?

Ah, forgot to mention its normalv7

Vers

newbie

Activity: 10

Merit: 0

Quote from: bobben2 on April 11, 2018, 10:39:16 AM

Some early test result with version 1.3.2
My 2 x RX 574 test rig now hashing at 913+914 H/s. And both GPUs temp/RPM are showing.
So far all is well. Thank you, dev Cheesy

Config:

GPUs running at 1200/2000 MSI with Hynix mem.

"gpu_conf" :
[
{ "id" : 0, "intensity" : 56, "worksize" : 8, "threads" : 2},
{ "id" : 1, "intensity" : 56, "worksize" : 8, "threads" : 2}
]

Algo heavy?

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 337. (Read 237263 times)