SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 65.

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: rdbase on February 12, 2019, 07:50:51 AM

Quote from: big_daddy on February 11, 2019, 04:00:46 AM

has anyone tested the new RX 570 16GB with SRBMiner?

Those cards are not available to the public consumer yet. They are on preorder. https://bitcointalksearch.org/topic/saphire-rx-570-16gb-seems-to-be-on-preorder-5104016
The radeon VII are out and have 16gb HBM memory but are sold out in most countries.

I know they are unavailable, but was wondering if someone has tested any different algo than eth, I'm very curious what this monster could do on CN forks

rdbase

legendary

Activity: 2828

Merit: 1497

Join the world-leading crypto sportsbook NOW!

Quote from: big_daddy on February 11, 2019, 04:00:46 AM

has anyone tested the new RX 570 16GB with SRBMiner?

Those cards are not available to the public consumer yet. They are on preorder. https://bitcointalksearch.org/topic/saphire-rx-570-16gb-seems-to-be-on-preorder-5104016
The radeon VII are out and have 16gb HBM memory but are sold out in most countries.

abg00

jr. member

Activity: 288

Merit: 1

Quote from: doktor83 on February 11, 2019, 06:27:44 AM

trouble in turtle
rx570 card
8000 rate at start but reduce to around 2000 after 1-2 hour. all ok after restart

in additional. rx550 card too

ManDoneKTM

newbie

Activity: 150

Merit: 0

Quote from: abg00 on February 10, 2019, 07:55:28 AM

new test for webchain coin

loudminer work only with blockchain drivers. with new drivers compute error.
srb miner with new drivers(18.6.1) dont work properly (( possible need remove webchain support in new version

use that miner and stop crying Grin

nordmann666

member

Activity: 363

Merit: 16

hey all...my 6 Vega rig worked great - but after selling some stuff and had 2 cards that i dont sold - i tried to put in my rig - DDU and reinstall drivers as ussual and now i get ""dpc_watchdog_violation"" bsod after some seconds with SRB.
quck test with choosing only 7 cards (-cgpuid 0-6 or 1-7 or 0,2,3,4...)) it works - but if i put all cards into the game - i got this bsod. I have the Intel iGPU active and my monitor is pluged in

i know there was a problem in older windows 10 builds...but i installed 1803 with 18.6.1. and this shouldnt happen

any hint to solve this?

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: dikobraz123 on February 11, 2019, 06:15:37 AM

According to this post:

https://bitcointalksearch.org/topic/m.49684589

XMR will undergo algo-change earlier than expected. I hope that SRBMiner will be adjusted for new algo change in time...?

Yup, it will.
Just adding Zelerius algo, Conceal algo, Wownero and then the new CNV4.
So much to do.

dikobraz123

member

Activity: 88

Merit: 24

According to this post:

https://bitcointalksearch.org/topic/m.49684589

XMR will undergo algo-change earlier than expected. I hope that SRBMiner will be adjusted for new algo change in time...?

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

has anyone tested the new RX 570 16GB with SRBMiner?

Bllacky

newbie

Activity: 22

Merit: 0

Quote from: Bllacky on January 21, 2019, 10:09:50 AM

Quote from: Bllacky on January 07, 2019, 04:54:17 AM

Quote from: doktor83 on January 04, 2019, 10:54:41 AM

Quote from: Bllacky on January 04, 2019, 02:49:08 AM

Feedback on
V. 1.7.5

Now it finally works when I have mix of 270X and 280X video cards.
Hashrates are very good for normal V8 algo:
280X 450 H/s
270X 345 H/s
290 530H/s

I do not OC.
I also sometimes get lots of STALE shares.

Good job!

Awesome, thanks for reporting.
Also stales shown in miner are not a problem because those are accepted shares.
Its just more a 'cosmetical thing'.

Feedback on
V. 1.7.6

Hashrates have gone up for normal V8 algo:
280X 455 H/s
270X 400 H/s
290 650H/s

Temperatures seem to be better on the 270X with this version, or maybe now they are read correctly.

Feedback on
V. 1.7.7

Hashrates have gone up by very little for normal V8 algo:
280X 460 H/s
270X 405 H/s
290 655H/s

Fan rpm on the 270X is now correctly reported.

Thank you!

Feedback on
V. 1.7.8

Hashrates have gone up by very little for normal V8 algo:
280X 460 H/s
270X 405 H/s
290 655H/s

Basically no change. Miner has gotten a lot more stable in the past 2 months.

fmz89

legendary

Activity: 1764

Merit: 1002

Well dev is very active & fast update, thx for supporting cryptonight miner, specially for amd hardware

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: abg00 on February 10, 2019, 10:59:16 AM

Quote from: doktor83 on February 10, 2019, 08:42:41 AM

also why do you say its not working on webchain when its finding shares, i just checked?
on blockchain, on 18.6.1 too.

real share rate in srbminer very low and not stable.
also check gpu usage. in loudminer stable 100%. in srbminer variable and not full usage gpu. realy check blockchain and 18.6.1 same result

test time 30 min. loudminer 85% of local rate. srbminer 40% local rate ((
check rx 470 4gb and rx550 2 gb card

So it is working but you are not getting the results you would like, so that's why i should remove it from the miner ... ?

Just use loudminer if it works for you better.

livada

newbie

Activity: 417

Merit: 0

Quote from: abg00 on February 10, 2019, 10:59:16 AM

Quote from: doktor83 on February 10, 2019, 08:42:41 AM

also why do you say its not working on webchain when its finding shares, i just checked?
on blockchain, on 18.6.1 too.

real share rate in srbminer very low and not stable.
also check gpu usage. in loudminer stable 100%. in srbminer variable and not full usage gpu. realy check blockchain and 18.6.1 same result

test time 30 min. loudminer 85% of local rate. srbminer 40% local rate ((
check rx 470 4gb and rx550 2 gb card

i chk and all work fine. your setup is problem . learn how mining solo (and stop use cheaters pools) and stop spam this topic with loudminer .loudmiener have 40% smaler HR.
loudminer sucks

JCE or xmr have smaller hr on all algo. All miner must remove all algo if have smaller hr??

abg00

jr. member

Activity: 288

Merit: 1

Quote from: doktor83 on February 10, 2019, 08:42:41 AM

also why do you say its not working on webchain when its finding shares, i just checked?
on blockchain, on 18.6.1 too.

real share rate in srbminer very low and not stable.
also check gpu usage. in loudminer stable 100%. in srbminer variable and not full usage gpu. realy check blockchain and 18.6.1 same result

test time 30 min. loudminer 85% of local rate. srbminer 40% local rate ((
check rx 470 4gb and rx550 2 gb card

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: abg00 on February 10, 2019, 08:17:38 AM

Quote from: doktor83 on February 10, 2019, 08:13:08 AM

Quote from: abg00 on February 10, 2019, 07:55:28 AM

new test for webchain coin

loudminer work only with blockchain drivers. with new drivers compute error.
srb miner with new drivers(18.6.1) dont work properly (( possible need remove webchain support in new version

18.6.1 are not new drivers Grin

your miner work with 18.6.1+ drivers? last new driver for mining 18.6.1 )))

also why do you say its not working on webchain when its finding shares, i just checked?
on blockchain, on 18.6.1 too.

SpceGhst

jr. member

Activity: 269

Merit: 4

Quote from: rodney2250 on February 10, 2019, 08:14:44 AM

Hey,

any plans to support RYU's new algo - Cryptonight-GPU?

Thanks

Already done...
https://bitcointalksearch.org/topic/m.49657740

abg00

jr. member

Activity: 288

Merit: 1

Quote from: doktor83 on February 10, 2019, 08:13:08 AM

Quote from: abg00 on February 10, 2019, 07:55:28 AM

new test for webchain coin

loudminer work only with blockchain drivers. with new drivers compute error.
srb miner with new drivers(18.6.1) dont work properly (( possible need remove webchain support in new version

18.6.1 are not new drivers Grin

your miner work with 18.6.1+ drivers? last new driver for mining 18.6.1 )))

rodney2250

jr. member

Activity: 177

Merit: 2

Hey,

any plans to support RYU's new algo - Cryptonight-GPU?

Thanks

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: abg00 on February 10, 2019, 07:55:28 AM

new test for webchain coin

loudminer work only with blockchain drivers. with new drivers compute error.
srb miner with new drivers(18.6.1) dont work properly (( possible need remove webchain support in new version

18.6.1 are not new drivers Grin

abg00

jr. member

Activity: 288

Merit: 1

new test for webchain coin

loudminer work only with blockchain drivers. with new drivers compute error.
srb miner with new drivers(18.6.1) dont work properly (( possible need remove webchain support in new version

NCarter84

jr. member

Activity: 195

Merit: 4

Quote from: doktor83 on February 09, 2019, 02:26:14 PM

Quote from: NCarter84 on February 09, 2019, 12:11:33 PM

Looks like GPU 0, which would be a RX470, 4gb card. All the other algos I tested worked fine.
I have 4 other 470s in this rig that are the same.

So that's why it is interesting, if the other cards are same.
Can you try to add --nocache in start.bat ?

Same result.

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 65. (Read 237263 times)