Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 97. (Read 237261 times)
November 18, 2018, 03:21:09 PM
9 gpus x 8gb memmory = 72 gb x 1024 = 73728 gb of virtual memmory you need to set for these cards.
November 18, 2018, 02:55:27 PM
not v8, haven forever. how much virtual memory need for 9 cards x 8gb?
November 18, 2018, 01:04:28 PM
DOK. my cards don't work well with the drivers 18.5.x and 18.6.1 (even in stock frequencies), stable work only with 18.3.4. with i 54, w 8, f 1, t 2.
rig 9xSapphire 580/8 special edition, HYNIX H5GQ8H24MJR
999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16. (this timing is the best and stable for me) 1230-1250/2100-2150 (880mv) - 1135-1165h/s on the haven algo.
If i>54 and f>1 + 2 threads = crash cards. in 1 thread i can start miner with i=100 f<=16, but hashrate is low and only 8 cards and 1 card (random)need low settings (i 54, w 8, f 1, t 2) 9 cards = crash. any ideas?
Hello friend,I also have these cards , this strap is the best strap for Hinyx memory, but your 880 mV is too small for this algo V8 and these cards,rise up your mV to 950 and have a nice minning.
rig 9xSapphire 580/8 special edition, HYNIX H5GQ8H24MJR
999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16. (this timing is the best and stable for me) 1230-1250/2100-2150 (880mv) - 1135-1165h/s on the haven algo.
If i>54 and f>1 + 2 threads = crash cards. in 1 thread i can start miner with i=100 f<=16, but hashrate is low and only 8 cards and 1 card (random)need low settings (i 54, w 8, f 1, t 2) 9 cards = crash. any ideas?
Hello friend,I also have these cards , this strap is the best strap for Hinyx memory, but your 880 mV is too small for this algo V8 and these cards,rise up your mV to 950 and have a nice minning.
November 18, 2018, 12:34:27 PM
Just a little headsup for the ones with a rx570 4GB, I increased the hashrate with +/-50 h/s by using W8 instead of W16, v1.7.0, on various cards with various clockings. All the options in between gave me errors or reboots or crashes. Power consumption seemed to increase too by 10 watts or so, for both stable clocking sets for 800 mV and 875mV. (SRBPIMP straps).
November 18, 2018, 11:37:23 AM
1.7.0 is working great for me on my 4x RX 560 (XfX 2GB) rig mining CNv8. I'm getting 460-490H/s per card with intensity set to 25.0 and using MSI AB 4.5.0 to set core at 1200, mem at 1900 and 100% PL (running an Anorak powersave BIOS). I really like the restart miner if hashrate drops below a certain value function as it seems that one or both of the middle two cards on this rig will drop in hashrate by about 150H/s every so often.
All in all, I'm happy to pay the dev fee vs. running xmr-stak compiled to have no devfee, as the latter barely did better than 400H/s per card and it had stability problems when it did run. Unfortunately, I am running at a razor thin margin of profitability vs. power cost right now, and it is only because the weather turned cooler recently that I am keeping this rig running at all (everything else was turned off and/or sold earlier this year).
All in all, I'm happy to pay the dev fee vs. running xmr-stak compiled to have no devfee, as the latter barely did better than 400H/s per card and it had stability problems when it did run. Unfortunately, I am running at a razor thin margin of profitability vs. power cost right now, and it is only because the weather turned cooler recently that I am keeping this rig running at all (everything else was turned off and/or sold earlier this year).
November 18, 2018, 11:25:17 AM
Getting a TON of compute errors with 1.7.0 on CN-Heavy.... Same settings at 1.6.8 and I saw no issues with... Keeps telling me to reduce memory clock... Even with dropping all clocks back to 1950 I see these errors... Anyone else?
November 18, 2018, 10:26:37 AM
DOK. my cards don't work well with the drivers 18.5.x and 18.6.1 (even in stock frequencies), stable work only with 18.3.4. with i 54, w 8, f 1, t 2.
rig 9xSapphire 580/8 special edition, HYNIX H5GQ8H24MJR
999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16. (this timing is the best and stable for me) 1230-1250/2100-2150 (880mv) - 1135-1165h/s on the haven algo.
If i>54 and f>1 + 2 threads = crash cards. in 1 thread i can start miner with i=100 f<=16, but hashrate is low and only 8 cards and 1 card (random)need low settings (i 54, w 8, f 1, t 2) 9 cards = crash. any ideas?
rig 9xSapphire 580/8 special edition, HYNIX H5GQ8H24MJR
999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16. (this timing is the best and stable for me) 1230-1250/2100-2150 (880mv) - 1135-1165h/s on the haven algo.
If i>54 and f>1 + 2 threads = crash cards. in 1 thread i can start miner with i=100 f<=16, but hashrate is low and only 8 cards and 1 card (random)need low settings (i 54, w 8, f 1, t 2) 9 cards = crash. any ideas?
November 18, 2018, 06:30:12 AM
hello everybody,
I am using win 10 64 bit and 3 vega rx 64 with adrenaling 18.6.1. driver
I had the problem that after a while (3 to 24) hours one of my cards crashed completly and could not be reset bei srbminer anymore, so hashing stopped completly.
now I reinstalled the driver (DDU save) and also didn't use BIOS hack anymore.
I deactivated CrossFire and started srbminer 1.7.0. with only changing my wallet adress in pool file.
srb starts, detects all 3 cards and connects to the pool. as soon as it starts to mine, the whole windows crashes and restarts automatically.
what could be the reason. thx for an clou.
thx
uli
I am using win 10 64 bit and 3 vega rx 64 with adrenaling 18.6.1. driver
I had the problem that after a while (3 to 24) hours one of my cards crashed completly and could not be reset bei srbminer anymore, so hashing stopped completly.
now I reinstalled the driver (DDU save) and also didn't use BIOS hack anymore.
I deactivated CrossFire and started srbminer 1.7.0. with only changing my wallet adress in pool file.
srb starts, detects all 3 cards and connects to the pool. as soon as it starts to mine, the whole windows crashes and restarts automatically.
what could be the reason. thx for an clou.
thx
uli
I had the same problem when I first started using SRBMiner. To tackle this issue, I identify the problematic GPU and reduce its memory clock a little bit and that solved the problem for good.
I also had the same issue with one of my Vega 56's. I had to start with minimal settings and then one by one tweak until I identified the weak one. I was then was able to do the full aggressive tweaks to the other six then found where the weak one would fail then back off on it.
sorry for the noob questions.
thx
OK, I digged deeper into it. Problem was deactivation of crossfire with on specific card. I now changed the riser I use for this card and everything is OK again. I only hope that also the problem of temporary crashes is solved now.
thx for you help
November 18, 2018, 01:37:24 AM
hello everybody,
I am using win 10 64 bit and 3 vega rx 64 with adrenaling 18.6.1. driver
I had the problem that after a while (3 to 24) hours one of my cards crashed completly and could not be reset bei srbminer anymore, so hashing stopped completly.
now I reinstalled the driver (DDU save) and also didn't use BIOS hack anymore.
I deactivated CrossFire and started srbminer 1.7.0. with only changing my wallet adress in pool file.
srb starts, detects all 3 cards and connects to the pool. as soon as it starts to mine, the whole windows crashes and restarts automatically.
what could be the reason. thx for an clou.
thx
uli
I am using win 10 64 bit and 3 vega rx 64 with adrenaling 18.6.1. driver
I had the problem that after a while (3 to 24) hours one of my cards crashed completly and could not be reset bei srbminer anymore, so hashing stopped completly.
now I reinstalled the driver (DDU save) and also didn't use BIOS hack anymore.
I deactivated CrossFire and started srbminer 1.7.0. with only changing my wallet adress in pool file.
srb starts, detects all 3 cards and connects to the pool. as soon as it starts to mine, the whole windows crashes and restarts automatically.
what could be the reason. thx for an clou.
thx
uli
I had the same problem when I first started using SRBMiner. To tackle this issue, I identify the problematic GPU and reduce its memory clock a little bit and that solved the problem for good.
I also had the same issue with one of my Vega 56's. I had to start with minimal settings and then one by one tweak until I identified the weak one. I was then was able to do the full aggressive tweaks to the other six then found where the weak one would fail then back off on it.
sorry for the noob questions.
thx
November 17, 2018, 11:43:13 PM
So i have some issues with one rx 480. Sometimes everything works with it running at 900 h/s. Most times it is running at 650 h/s, with or without video cable on it. What could be the issue? Anyone has similar problem? TIA.
November 17, 2018, 09:43:16 PM
hello everybody,
I am using win 10 64 bit and 3 vega rx 64 with adrenaling 18.6.1. driver
I had the problem that after a while (3 to 24) hours one of my cards crashed completly and could not be reset bei srbminer anymore, so hashing stopped completly.
now I reinstalled the driver (DDU save) and also didn't use BIOS hack anymore.
I deactivated CrossFire and started srbminer 1.7.0. with only changing my wallet adress in pool file.
srb starts, detects all 3 cards and connects to the pool. as soon as it starts to mine, the whole windows crashes and restarts automatically.
what could be the reason. thx for an clou.
thx
uli
I am using win 10 64 bit and 3 vega rx 64 with adrenaling 18.6.1. driver
I had the problem that after a while (3 to 24) hours one of my cards crashed completly and could not be reset bei srbminer anymore, so hashing stopped completly.
now I reinstalled the driver (DDU save) and also didn't use BIOS hack anymore.
I deactivated CrossFire and started srbminer 1.7.0. with only changing my wallet adress in pool file.
srb starts, detects all 3 cards and connects to the pool. as soon as it starts to mine, the whole windows crashes and restarts automatically.
what could be the reason. thx for an clou.
thx
uli
I had the same problem when I first started using SRBMiner. To tackle this issue, I identify the problematic GPU and reduce its memory clock a little bit and that solved the problem for good.
I also had the same issue with one of my Vega 56's. I had to start with minimal settings and then one by one tweak until I identified the weak one. I was then was able to do the full aggressive tweaks to the other six then found where the weak one would fail then back off on it.
November 17, 2018, 10:43:20 AM
Just curious if you were gonna add the new free haven algo?
https://github.com/freehavenprotocol/freehaven
https://github.com/freehavenprotocol/freehaven
November 17, 2018, 07:51:14 AM
hello everybody,
I am using win 10 64 bit and 3 vega rx 64 with adrenaling 18.6.1. driver
I had the problem that after a while (3 to 24) hours one of my cards crashed completly and could not be reset bei srbminer anymore, so hashing stopped completly.
now I reinstalled the driver (DDU save) and also didn't use BIOS hack anymore.
I deactivated CrossFire and started srbminer 1.7.0. with only changing my wallet adress in pool file.
srb starts, detects all 3 cards and connects to the pool. as soon as it starts to mine, the whole windows crashes and restarts automatically.
what could be the reason. thx for an clou.
thx
uli
I am using win 10 64 bit and 3 vega rx 64 with adrenaling 18.6.1. driver
I had the problem that after a while (3 to 24) hours one of my cards crashed completly and could not be reset bei srbminer anymore, so hashing stopped completly.
now I reinstalled the driver (DDU save) and also didn't use BIOS hack anymore.
I deactivated CrossFire and started srbminer 1.7.0. with only changing my wallet adress in pool file.
srb starts, detects all 3 cards and connects to the pool. as soon as it starts to mine, the whole windows crashes and restarts automatically.
what could be the reason. thx for an clou.
thx
uli
November 17, 2018, 07:49:09 AM
how to mine webchain with this ?
everytime a error ( Could not login user to pool, trying again)
everytime a error ( Could not login user to pool, trying again)
November 17, 2018, 04:54:31 AM
Hi what should I do to use SRB miner V1.7.0 on hiveos. I use it on Windows, but after a few hours the computer slows down a lot of operations can not.
November 17, 2018, 03:05:06 AM
Whats happening with the RX 550 2GB with the 1.7.0 version?
When i run benchmark mode the hashrate is 465 (lower than the previous 490), but when i run the miner it drops to 365 h/s. Algo is normalv8. The RX 570 perform better than before, the RX 460 are at the same level.
Doctor, do you have RX 550 cards to test this?
When i run benchmark mode the hashrate is 465 (lower than the previous 490), but when i run the miner it drops to 365 h/s. Algo is normalv8. The RX 570 perform better than before, the RX 460 are at the same level.
Doctor, do you have RX 550 cards to test this?
November 17, 2018, 02:32:01 AM
I cant undervolt my cards more of -130 ,on some cards maximim is -150
XMR https://imgur.com/gallery/F6wtKsV
Why cant undervolt ,somebody know?
Use Overdrive tool XMR https://imgur.com/gallery/F6wtKsV
Why cant undervolt ,somebody know?
November 16, 2018, 09:38:03 PM
Thanks, Here are my new numbers using your data: https://bitcointalksearch.org/topic/m.47961899
I do have a question about the memory voltage. I have set Mem_P3 to 875mv but in HWINFO64 the GPU Memory Voltage (mvddc) is shown as 1.250V no matter what Mem_P3 is set to. On your system what does HWINFO64 show for GPU Memory Voltage (mvddc)?
I do not really know cause i do not have hwinfo64 installed. But I do read some stuff that my interests you here:
https://www.reddit.com/r/MoneroMining/comments/9pwedo/guide_to_reaching_2k_2020_hs_on_cryptonight_v8_on/e84vinn
November 16, 2018, 08:50:30 PM
Nice increase of performance,
My vega 64 go from 1600 to 1780
with a little more power comsume 
Thanks
My vega 64 go from 1600 to 1780
with a little more power comsume Thanks
November 16, 2018, 12:50:58 PM
I cant undervolt my cards more of -130 ,on some cards maximim is -150
XMR https://imgur.com/gallery/F6wtKsV
Why cant undervolt ,somebody know?
XMR https://imgur.com/gallery/F6wtKsV
Why cant undervolt ,somebody know?
Jump to: