Topic: SRBMiner-MULTI GPU & CPU Miner 0.9.4 - page 38. (Read 42480 times)
does this miner support "zombie" mode for 4GB cards on ethereum?
@doktor83 Just to report that 20536 port together with esm 0 did the trick for miningpoolhub. Thank you.
V0.6.0
+ Added experimental support for RX 6500/6700/6800/6900 AMD devices
+ Small performance increase on 'cryptonight_gpu' algorithm
+ Small performance increase on 'curvehash' algorithm
+ Slow start (ramp up) of GPU's on miner start is now on by default
+ Added parameter '--disable-workers-ramp-up'
+ Added parameter '--gpu-extra-config' (check details in Help\Gpu_Tweaking_And_Boost.txt)
+ Removed 'tellor' algorithm
+ Removed 'rainforestv2' algorithm
+ Added experimental support for RX 6500/6700/6800/6900 AMD devices
+ Small performance increase on 'cryptonight_gpu' algorithm
+ Small performance increase on 'curvehash' algorithm
+ Slow start (ramp up) of GPU's on miner start is now on by default
+ Added parameter '--disable-workers-ramp-up'
+ Added parameter '--gpu-extra-config' (check details in Help\Gpu_Tweaking_And_Boost.txt)
+ Removed 'tellor' algorithm
+ Removed 'rainforestv2' algorithm
There is an odd thing i have with hiveos
Right now i use srbminer to mine xhv
I config the watchdog hashrate like if a card down reboot the system
My problem is one card gone off but the watchdog does not work
Because the report hashrate does not drop
See the pic please
https://pasteboard.co/JFrVNFj.jpg
Depending on how the card crashed, sometimes the last hashrate can be stuck but only on the 'display'. if the gpu worker thread isnt reporting back to the control thread a few minutes then the miner watchdog triggers. (or it shoudld) Right now i use srbminer to mine xhv
I config the watchdog hashrate like if a card down reboot the system
My problem is one card gone off but the watchdog does not work
Because the report hashrate does not drop
See the pic please
https://pasteboard.co/JFrVNFj.jpg
There is an odd thing i have with hiveos
Right now i use srbminer to mine xhv
I config the watchdog hashrate like if a card down reboot the system
My problem is one card gone off but the watchdog does not work
Because the report hashrate does not drop
See the pic please
https://pasteboard.co/JFrVNFj.jpg
Right now i use srbminer to mine xhv
I config the watchdog hashrate like if a card down reboot the system
My problem is one card gone off but the watchdog does not work
Because the report hashrate does not drop
See the pic please
https://pasteboard.co/JFrVNFj.jpg
Same here. Tried with "--esm 2" and "ESM: 2" without any difference whatsoever.
Yeah, Autoexchange is the only feature why I use MPH. It works great on Hive Pool for instance, it´s just with MPH.
And this is the reply from the pool when asked about:
"Hi xxxxx,
We actually haven't tested SRBMulti with hive OS, but you can check the reference and port no. on our news page.
You may ask any SRBMulti miner communities if you have any issues.
Thank you. "
Yeah, Autoexchange is the only feature why I use MPH. It works great on Hive Pool for instance, it´s just with MPH.
And this is the reply from the pool when asked about:
"Hi xxxxx,
We actually haven't tested SRBMulti with hive OS, but you can check the reference and port no. on our news page.
You may ask any SRBMulti miner communities if you have any issues.
Thank you. "
There is no esm 2 in SRBMiner btw. There are 0 and 1.
After looking at miningpoolhub main page, i found out that you can mine to port 20536.
That's what the reply from them actually said ( but you can check the reference and port no. on our news page )
Code:
SRBMiner-MULTI.exe --disable-cpu --algorithm ethash --pool us-east.ethash-hub.miningpoolhub.com:20536 --wallet wallet.worker --password x --worker wallet.worker
Thanks
Yes 4gb
Now improve to 893H/s
What is the range for gpu boost option?
Yes 4gb
Now improve to 893H/s
What is the range for gpu boost option?
1-50
Any recommendations for 4gb rx580 for another rig
Right now core 1200 memory 2100 boost 4 hashrate 940-945
What is your professional suggestion
Going to check it out and make it work guys 
Thanks for reporting
Thanks for reporting
Same here. Tried with "--esm 2" and "ESM: 2" without any difference whatsoever.
Yeah, Autoexchange is the only feature why I use MPH. It works great on Hive Pool for instance, it´s just with MPH.
And this is the reply from the pool when asked about:
"Hi xxxxx,
We actually haven't tested SRBMulti with hive OS, but you can check the reference and port no. on our news page.
You may ask any SRBMulti miner communities if you have any issues.
Thank you. "
Yeah, Autoexchange is the only feature why I use MPH. It works great on Hive Pool for instance, it´s just with MPH.
And this is the reply from the pool when asked about:
"Hi xxxxx,
We actually haven't tested SRBMulti with hive OS, but you can check the reference and port no. on our news page.
You may ask any SRBMulti miner communities if you have any issues.
Thank you. "
@doktor83 I m having problems with connecting to miningpoolhub. Other pools are working just fine. It must be that I m doing something wrong.
Quote
[2020-12-16 16:18:37] PARSE error: Missing important data from job JSON [ethash]
[2020-12-16 16:18:37] Reconnecting to us-east.ethash-hub.miningpoolhub.com:20535 in 3 seconds [ethash]
[2020-12-16 16:18:37] Reconnecting to us-east.ethash-hub.miningpoolhub.com:20535 in 3 seconds [ethash]
Never tested on miningpoolhub, did you try setting --esm parameter?
I have one interesting machine with Vega cards who doesn't work anymore with claymore for ETH because of known reasons. However all other miners fail on that machine when it comes to implementations of the straps except SRBMiner-MULTI who works flawlessly. Only problem with it is with connecting to miningpoolhub. It could be good if you find some time to take a look at this because I know that there are lot of users who have same problem. For me changing pool is not an option because miningpoolhub has certain features like autoexchange.
Anyone knows the settings to mine ETH on MiningPoolHub on HiveOS?
Experienced miner here, and I can´t figure out what are the parameters to connect to pool.
Experienced miner here, and I can´t figure out what are the parameters to connect to pool.
Thanks
Yes 4gb
Now improve to 893H/s
What is the range for gpu boost option?
Yes 4gb
Now improve to 893H/s
What is the range for gpu boost option?
1-50
hi guys
any advice for 470 on hiveos
the coreclock and memory clock
and best setting for SRBminer
mining XHV
right now my setting is
--disable-cpu
--gpu-intensity (not set)
--gpu-worksize (not set)
--gpu-threads (not set)
core 1169
memory 1975
and have 875H/s
can i improve it?
any advice for 470 on hiveos
the coreclock and memory clock
and best setting for SRBminer
mining XHV
right now my setting is
--disable-cpu
--gpu-intensity (not set)
--gpu-worksize (not set)
--gpu-threads (not set)
core 1169
memory 1975
and have 875H/s
can i improve it?
Those are 4gb cards, right?
you could try:
--gpu-intensity 480+480
--gpu-boost 3
Yes 4gb
Now improve to 893H/s
What is the range for gpu boost option?
hi guys
any advice for 470 on hiveos
the coreclock and memory clock
and best setting for SRBminer
mining XHV
right now my setting is
--disable-cpu
--gpu-intensity (not set)
--gpu-worksize (not set)
--gpu-threads (not set)
core 1169
memory 1975
and have 875H/s
can i improve it?
any advice for 470 on hiveos
the coreclock and memory clock
and best setting for SRBminer
mining XHV
right now my setting is
--disable-cpu
--gpu-intensity (not set)
--gpu-worksize (not set)
--gpu-threads (not set)
core 1169
memory 1975
and have 875H/s
can i improve it?
Those are 4gb cards, right?
you could try:
--gpu-intensity 480+480
--gpu-boost 3
@doktor83 I m having problems with connecting to miningpoolhub. Other pools are working just fine. It must be that I m doing something wrong.
Quote
[2020-12-16 16:18:37] PARSE error: Missing important data from job JSON [ethash]
[2020-12-16 16:18:37] Reconnecting to us-east.ethash-hub.miningpoolhub.com:20535 in 3 seconds [ethash]
[2020-12-16 16:18:37] Reconnecting to us-east.ethash-hub.miningpoolhub.com:20535 in 3 seconds [ethash]
Never tested on miningpoolhub, did you try setting --esm parameter?
hi guys
any advice for 470 on hiveos
the coreclock and memory clock
and best setting for SRBminer
mining XHV
right now my setting is
--disable-cpu
--gpu-intensity (not set)
--gpu-worksize (not set)
--gpu-threads (not set)
core 1169
memory 1975
and have 875H/s
can i improve it?
any advice for 470 on hiveos
the coreclock and memory clock
and best setting for SRBminer
mining XHV
right now my setting is
--disable-cpu
--gpu-intensity (not set)
--gpu-worksize (not set)
--gpu-threads (not set)
core 1169
memory 1975
and have 875H/s
can i improve it?
@doktor83 I m having problems with connecting to miningpoolhub. Other pools are working just fine. It must be that I m doing something wrong.
Quote
[2020-12-16 16:18:37] PARSE error: Missing important data from job JSON [ethash]
[2020-12-16 16:18:37] Reconnecting to us-east.ethash-hub.miningpoolhub.com:20535 in 3 seconds [ethash]
[2020-12-16 16:18:37] Reconnecting to us-east.ethash-hub.miningpoolhub.com:20535 in 3 seconds [ethash]
omg another miner 
guys is it faster than Phoenixminer and Claymore miner?
guys is it faster than Phoenixminer and Claymore miner?
It's not
omg another miner
guys is it faster than Phoenixminer and Claymore miner?
guys is it faster than Phoenixminer and Claymore miner?
V0.5.9
+ Fixed a bug on 'randomx' algorithm that could cause miner to create invalid shares for some jobs ( Important fix! )
+ Removed algorithm 'cryptonight_bbc'
+ Removed algorithm 'cryptonight_catalans'
+ Bug fixes
+ Fixed a bug on 'randomx' algorithm that could cause miner to create invalid shares for some jobs ( Important fix! )
+ Removed algorithm 'cryptonight_bbc'
+ Removed algorithm 'cryptonight_catalans'
+ Bug fixes
Jump to: