Look guys you did a great job. This is one of the best miner for AMD GPU. I have one old R9 290 and with this miner everything goes perfect.
But i have one suggest for you. You need to do only one thing...
ADD kawpow algorithm for Ravencoin in next versions, please. I thing that is a mistake that you can repare it.
Once again, great job! Thanks.
Topic: SRBMiner-MULTI GPU & CPU Miner 0.9.4 - page 37. (Read 42979 times)
hi when monero mining resource monitor only says cpu is at 50 percent usage anyone know how to crank the cpu up cheers.
To manually set number of cpu threads, add : --cpu-threads x where x is the number of threads you want to use.
Just a note : more isn't always better.
hi when monero mining resource monitor only says cpu is at 50 percent usage anyone know how to crank the cpu up cheers.
add --gpu-id 0!1.. with --gpu-boost 10 --gpu-intensity 472+472
at start gpu-intensity 464 not 472 and gpu-boost 1 not 10
at start gpu-intensity 464 not 472 and gpu-boost 1 not 10
paste your config line here cause something ain't good there.
Code:
SRBMiner-MULTI.exe --disable-cpu --algorithm cryptonight_xhv --gpu-id 0!1!2!3!4 --gpu-intensity 472+472 --gpu-boost 10 --pool haven.herominers.com:10451 --wallet your-wallet
work. tnx
add --gpu-id 0!1.. with --gpu-boost 10 --gpu-intensity 472+472
at start gpu-intensity 464 not 472 and gpu-boost 1 not 10
at start gpu-intensity 464 not 472 and gpu-boost 1 not 10
paste your config line here cause something ain't good there.
Code:
SRBMiner-MULTI.exe --disable-cpu --algorithm cryptonight_xhv --gpu-id 0!1!2!3!4 --gpu-intensity 472+472 --gpu-boost 10 --pool haven.herominers.com:10451 --wallet your-wallet
add --gpu-id 0!1.. with --gpu-boost 10 --gpu-intensity 472+472
at start gpu-intensity 464 not 472 and gpu-boost 1 not 10
at start gpu-intensity 464 not 472 and gpu-boost 1 not 10
you know how this works, experiment with different intensity settings..
add --gpu-boost 10 --gpu-intensity 472+472
was 905 now 925
rate high but trm better (( 955
haven rate to low. trm +5-15%
use standart settings as in example
cards rx 474 574 584 without memory error
possible need additional tune settings? run as admin with tweak enable
you know how this works, experiment with different intensity settings..
V0.6.2
+ Added algorithm 'circcash' (Circcash) for CPU mining, fee 0.85%
+ Added algorithm 'phi5' (Combode) for CPU mining, fee 0.85%
+ Added algorithm 'circcash' (Circcash) for CPU mining, fee 0.85%
+ Added algorithm 'phi5' (Combode) for CPU mining, fee 0.85%
haven rate to low. trm +5-15%
use standart settings as in example
cards rx 474 574 584 without memory error
possible need additional tune settings? run as admin with tweak enable
how to select some video card? cannot find in readme.
--gpu-id 0!1 ... where 0 and 1 are gpu's you want to use
how to select some video card? cannot find in readme.
any example command how to use this in simplie mining to mine haven coin?
V0.6.1
+ Added algorithm 'balloon_zentoshi' (Zentoshi coin) for CPU mining, fee 0.85%
+ 'cryptonight_xhv' kernel small changes, pool side hashrate should be a little higher
+ Auto setup for 'cryptonight_xhv' algorithm is a little more agressive now (if you experience some issues, use --gpu-auto-intensity 1 for lighter settings)
+ Removed parameter '--gpu-worksize'
+ Added algorithm 'balloon_zentoshi' (Zentoshi coin) for CPU mining, fee 0.85%
+ 'cryptonight_xhv' kernel small changes, pool side hashrate should be a little higher
+ Auto setup for 'cryptonight_xhv' algorithm is a little more agressive now (if you experience some issues, use --gpu-auto-intensity 1 for lighter settings)
+ Removed parameter '--gpu-worksize'
Quote
Added algorithm 'balloon_zentoshi' (Zentoshi coin)
But.. may i ask.. why? This is another useless pictures sh@tcoin.Quote
Removed parameter '--gpu-worksize'
Yes... and why?. This parameter not work in all version, maybe better to make it work?
@doktor83 Hi i know im risking to seem stupid to a lot o people on the forum but i think its a bit late for me to start programming now that im 35 so i have to ask somebody who knows, now that the 4gb models of graphic cards are more or less obsolete for mining ethereum is there a way to write the dag into the ram of the computer instead of the vram even if its slower or make a hybrid mode like zombie mode other devs implemented to prolong the 4gb gpu cards, the eth asic are using ddr3 memory for dag and achieve good results, is there a limit in a pc that is crippling it too much to be useful or is it really hard to do coding for such a thing? most of the mining boards use ddr4 which should be a bit faster. Also do you think the enabling of the resizeable bar support in which the cpu can access all the memory on the gpu will help improving hashrate on some algos?
Thank you in advance
Thank you in advance
V0.6.1
+ Added algorithm 'balloon_zentoshi' (Zentoshi coin) for CPU mining, fee 0.85%
+ 'cryptonight_xhv' kernel small changes, pool side hashrate should be a little higher
+ Auto setup for 'cryptonight_xhv' algorithm is a little more agressive now (if you experience some issues, use --gpu-auto-intensity 1 for lighter settings)
+ Removed parameter '--gpu-worksize'
+ Added algorithm 'balloon_zentoshi' (Zentoshi coin) for CPU mining, fee 0.85%
+ 'cryptonight_xhv' kernel small changes, pool side hashrate should be a little higher
+ Auto setup for 'cryptonight_xhv' algorithm is a little more agressive now (if you experience some issues, use --gpu-auto-intensity 1 for lighter settings)
+ Removed parameter '--gpu-worksize'
ok than I need to find another miner
Xmrig can gpu mine Randomx. But mining RandomX on your gpu isn't profitable.
Depends which cpu you have.. same as with gpu's. google a little bit around you can find plenty of info
ok than I need to find another miner
Xmrig can gpu mine Randomx. But mining RandomX on your gpu isn't profitable.
ok than I need to find another miner
Xmrig can gpu mine Randomx. But mining RandomX on your gpu isn't profitable.
ok than I need to find another miner
Jump to: