SRBMiner-MULTI GPU & CPU Miner 0.9.4 - page 41.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: alizali on December 20, 2020, 05:11:33 AM

with core 1200 and memory 2100 i have 945~950
my problem is i do not know the range of values so i can test your great miner
is there any help or manual for it

For example if miner shows you 472 when you run it without any intensity settings (auto mode), you could try going up/down by steps of 8.

--gpu-intensity 480+480

if hashrate is increased , increment more

--gpu-intensity 488+488

etc

test until hashrate decreses, or miner / system crashes etc. Then go back to the last value that worked for you.

you get the point

alizali

newbie

Activity: 197

Merit: 0

Quote from: doktor83 on December 20, 2020, 04:00:57 AM

Quote from: alizali on December 20, 2020, 03:34:12 AM

Quote from: alizali on December 17, 2020, 09:58:08 AM

Quote from: doktor83 on December 16, 2020, 12:02:24 PM

Quote from: alizali on December 16, 2020, 11:43:50 AM

Thanks
Yes 4gb
Now improve to 893H/s
What is the range for gpu boost option?

1-50

Any recommendations for 4gb rx580 for another rig
Right now core 1200 memory 2100 boost 4 hashrate 940-945
What is your professional suggestion

@doktor83
Hi
do you gave any suggestion for rx 580

auto setup should be good enough, you can always see what value the auto setup sets and try to increase/decrease it by small steps and test.
What is good for one card isn't guaranteed to be good for an other card, so testing is a must.

with core 1200 and memory 2100 i have 945~950
my problem is i do not know the range of values so i can test your great miner
is there any help or manual for it

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: alizali on December 20, 2020, 03:34:12 AM

Quote from: alizali on December 17, 2020, 09:58:08 AM

Quote from: doktor83 on December 16, 2020, 12:02:24 PM

Quote from: alizali on December 16, 2020, 11:43:50 AM

Thanks
Yes 4gb
Now improve to 893H/s
What is the range for gpu boost option?

1-50

Any recommendations for 4gb rx580 for another rig
Right now core 1200 memory 2100 boost 4 hashrate 940-945
What is your professional suggestion

@doktor83
Hi
do you gave any suggestion for rx 580

auto setup should be good enough, you can always see what value the auto setup sets and try to increase/decrease it by small steps and test.
What is good for one card isn't guaranteed to be good for an other card, so testing is a must.

alizali

newbie

Activity: 197

Merit: 0

Quote from: alizali on December 17, 2020, 09:58:08 AM

Quote from: doktor83 on December 16, 2020, 12:02:24 PM

Quote from: alizali on December 16, 2020, 11:43:50 AM

Thanks
Yes 4gb
Now improve to 893H/s
What is the range for gpu boost option?

1-50

Any recommendations for 4gb rx580 for another rig
Right now core 1200 memory 2100 boost 4 hashrate 940-945
What is your professional suggestion

@doktor83
Hi
do you gave any suggestion for rx 580

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: somaton on December 19, 2020, 07:54:50 AM

tried 0.6.0 with rx 6800, was mining eth for last 10 hours - no problems or crashing. Only temp, fan speed, power consumption and frequencies are missing. For example gminer, nbminer show all that info, speeds almost same too.
btw, is it possible to show the difficulty of job/share?

Thanks for testing, at least i know it hashes and finds shares. Can't really do much about sensor readings without having access to a card.
Diff that pool sends is the job diff, that's displayed in miner, but i dont have share diff added, i never found that stat useful enough to add it.

Edit: you could try setting adl manually with : --gpu-adl-type 3

somaton

jr. member

Activity: 212

Merit: 6

tried 0.6.0 with rx 6800, was mining eth for last 10 hours - no problems or crashing. Only temp, fan speed, power consumption and frequencies are missing. For example gminer, nbminer show all that info, speeds almost same too.
btw, is it possible to show the difficulty of job/share?

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: N2DCRYPT on December 18, 2020, 06:34:54 PM

@doktor83 kudos for being one the first devs to add experimental support for big navi.

No luck on cn_gpu for 6900xt, gpu is hashing but not getting any accepted shares on pool. Thoughts?

Can mine cn_xhv with accepted shares, strange behavior, hashrate will oscillate b/t 2100-2600 until settling around 2400.
Tried varying intensities, gpu seemed to prefer using dual threads, but similar results with respect to oscillating for first minute or two after startup.

Yes i have actually, now that you mentioned cn_gpu, because i just remembered i didnt compile it the way i should have

Going to be fixed in next release.

I dont have a 6900xt so i couldn't test, but looking at the specs i think you could try running 3 or maybe even 4 threads.

Code:

--gpu-intensity 896+896+896

For settling the oscilations you could try the new-old thread delay parameter i added, --gpu-extra-config (check details in Help\Gpu_Tweaking_And_Boost.txt)

Can you test it on ETHASH, im curious about the results ?

N2DCRYPT

jr. member

Activity: 148

Merit: 5

@doktor83 kudos for being one the first devs to add experimental support for big navi.

No luck on cn_gpu for 6900xt, gpu is hashing but not getting any accepted shares on pool. Thoughts?

Can mine cn_xhv with accepted shares, strange behavior, hashrate will oscillate b/t 2100-2600 until settling around 2400.
Tried varying intensities, gpu seemed to prefer using dual threads, but similar results with respect to oscillating for first minute or two after startup.

bassistas

newbie

Activity: 32

Merit: 0

does this miner support "zombie" mode for 4GB cards on ethereum?

majsta

hero member

Activity: 561

Merit: 500

kittehcoin.info

@doktor83 Just to report that 20536 port together with esm 0 did the trick for miningpoolhub. Thank you.

doktor83

hero member

Activity: 2548

Merit: 626

V0.6.0
+ Added experimental support for RX 6500/6700/6800/6900 AMD devices
+ Small performance increase on 'cryptonight_gpu' algorithm
+ Small performance increase on 'curvehash' algorithm
+ Slow start (ramp up) of GPU's on miner start is now on by default
+ Added parameter '--disable-workers-ramp-up'
+ Added parameter '--gpu-extra-config' (check details in Help\Gpu_Tweaking_And_Boost.txt)
+ Removed 'tellor' algorithm
+ Removed 'rainforestv2' algorithm

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: alizali on December 18, 2020, 03:42:15 AM

There is an odd thing i have with hiveos
Right now i use srbminer to mine xhv
I config the watchdog hashrate like if a card down reboot the system
My problem is one card gone off but the watchdog does not work
Because the report hashrate does not drop

See the pic please
https://pasteboard.co/JFrVNFj.jpg

Depending on how the card crashed, sometimes the last hashrate can be stuck but only on the 'display'. if the gpu worker thread isnt reporting back to the control thread a few minutes then the miner watchdog triggers. (or it shoudld)

alizali

newbie

Activity: 197

Merit: 0

There is an odd thing i have with hiveos
Right now i use srbminer to mine xhv
I config the watchdog hashrate like if a card down reboot the system
My problem is one card gone off but the watchdog does not work
Because the report hashrate does not drop

See the pic please
https://pasteboard.co/JFrVNFj.jpg

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: naxbc on December 17, 2020, 06:06:40 AM

Same here. Tried with "--esm 2" and "ESM: 2" without any difference whatsoever.
Yeah, Autoexchange is the only feature why I use MPH. It works great on Hive Pool for instance, it´s just with MPH.

And this is the reply from the pool when asked about:

"Hi xxxxx,

We actually haven't tested SRBMulti with hive OS, but you can check the reference and port no. on our news page.
You may ask any SRBMulti miner communities if you have any issues.

Thank you. "

There is no esm 2 in SRBMiner btw. There are 0 and 1.

After looking at miningpoolhub main page, i found out that you can mine to port 20536.
That's what the reply from them actually said ( but you can check the reference and port no. on our news page )

Code:

SRBMiner-MULTI.exe --disable-cpu --algorithm ethash --pool us-east.ethash-hub.miningpoolhub.com:20536 --wallet wallet.worker --password x --worker wallet.worker

alizali

newbie

Activity: 197

Merit: 0

Quote from: doktor83 on December 16, 2020, 12:02:24 PM

Quote from: alizali on December 16, 2020, 11:43:50 AM

Thanks
Yes 4gb
Now improve to 893H/s
What is the range for gpu boost option?

1-50

Any recommendations for 4gb rx580 for another rig
Right now core 1200 memory 2100 boost 4 hashrate 940-945
What is your professional suggestion

doktor83

hero member

Activity: 2548

Merit: 626

Going to check it out and make it work guys

Thanks for reporting

naxbc

newbie

Activity: 5

Merit: 0

Same here. Tried with "--esm 2" and "ESM: 2" without any difference whatsoever.
Yeah, Autoexchange is the only feature why I use MPH. It works great on Hive Pool for instance, it´s just with MPH.

And this is the reply from the pool when asked about:

"Hi xxxxx,

We actually haven't tested SRBMulti with hive OS, but you can check the reference and port no. on our news page.
You may ask any SRBMulti miner communities if you have any issues.

Thank you. "

majsta

hero member

Activity: 561

Merit: 500

kittehcoin.info

Quote from: doktor83 on December 16, 2020, 11:09:44 AM

Quote from: majsta on December 16, 2020, 10:19:58 AM

@doktor83 I m having problems with connecting to miningpoolhub. Other pools are working just fine. It must be that I m doing something wrong.

Quote

[2020-12-16 16:18:37] PARSE error: Missing important data from job JSON [ethash]
[2020-12-16 16:18:37] Reconnecting to us-east.ethash-hub.miningpoolhub.com:20535 in 3 seconds [ethash]

Never tested on miningpoolhub, did you try setting --esm parameter?

Yes I did but didn't help. It does not matter what to use as --esm parameter result is the same.
I have one interesting machine with Vega cards who doesn't work anymore with claymore for ETH because of known reasons. However all other miners fail on that machine when it comes to implementations of the straps except SRBMiner-MULTI who works flawlessly. Only problem with it is with connecting to miningpoolhub. It could be good if you find some time to take a look at this because I know that there are lot of users who have same problem. For me changing pool is not an option because miningpoolhub has certain features like autoexchange.

naxbc

newbie

Activity: 5

Merit: 0

Anyone knows the settings to mine ETH on MiningPoolHub on HiveOS?
Experienced miner here, and I can´t figure out what are the parameters to connect to pool.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: alizali on December 16, 2020, 11:43:50 AM

Thanks
Yes 4gb
Now improve to 893H/s
What is the range for gpu boost option?

1-50

Topic: SRBMiner-MULTI GPU & CPU Miner 0.9.4 - page 41. (Read 45097 times)