Pages:
Author

Topic: SRBMiner-MULTI GPU & CPU Miner 0.9.4 - page 48. (Read 41789 times)

hero member
Activity: 2422
Merit: 625
March 10, 2020, 07:10:07 AM
V0.4.0

+ Added algorithm 'randomkeva' (Keva coin upcoming algorithm)
+ Added Navi support for 'cryptonight_bbc' algorithm
+ Much better auto setup for RX 4xx/5xx 8G cards on 'cryptonight_bbc' algorithm
hero member
Activity: 2422
Merit: 625
March 09, 2020, 06:29:44 AM
V0.3.9

+ Miner now works on older linux distributions ( Ubuntu 16.04 - glibc2.23 )
+ Small hashrate increase on 'cryptonight_bbc' algorithm for some GPU's
+ Yescrypt algorithms hashrate increase on CPU if miner run with administrator/root privilege
+ Fixed GPU sensors reading on Linux
+ Fixed a bug that sometimes stopped hashing when connected to the pool after a long reconnect period
+ Renamed '--disable-randomx-tweaks' parameter to '--disable-msr-tweaks', '--disable-tweaking' to '--disable-gpu-tweaking', and '--randomx-use-tweaks' to '--msr-use-tweaks'
+ Minor bug fixes
hero member
Activity: 2422
Merit: 625
March 02, 2020, 06:34:26 AM
Do we have some numbers for kadena?
Rx570 or vega 56/64
Unfortunately not able to test for a few days

Very core clock dependent, but you should get around 6.4 - 6.5 Ghs on Vega64 for example
hero member
Activity: 2422
Merit: 625
March 02, 2020, 06:33:15 AM
V0.3.8
+ Hashrate increased even more on 'kadena' algorithm, and at the same time lowered power usage
+ Small hashrate increase on 'yescrypt' CPU algorithms
+ Minor bug fixes
jr. member
Activity: 225
Merit: 1
March 02, 2020, 06:28:38 AM
V0.3.7
+ 'kadena' algorithm huge hashrate increase
+ Added 'gpu_' prefix to GPU related parameters in config file : gpu_intensity, gpu_raw_intensity, gpu_worksize, gpu_threads, gpu_tweak_profile, gpu_target_temperature, gpu_shutdown_temperature, gpu_off_temperature. 'gpu_conf' parameters naming stays the same.
+ Added new parameters in config file : cpu_threads, cpu_affinity, cpu_priority
+ Renamed 'pool_use_tls' in pool configuration file to 'tls'

- Kadena algo is now again profitable to mine with GPU (at least for some time), so try it out!

- From this version i added the gpu_ prefix to all parameters in configuration file that are related to GPU, and used outside gpu_conf. Parameters inside 'gpu_conf' stayed the same.

- Also added possibility to set basic CPU parameters in configuration file ( cpu_threads, cpu_affinity, cpu_priority )


Do we have some numbers for kadena?
Rx570 or vega 56/64
Unfortunately not able to test for a few days
hero member
Activity: 2422
Merit: 625
March 01, 2020, 05:46:18 PM
V0.3.7
+ 'kadena' algorithm huge hashrate increase
+ Added 'gpu_' prefix to GPU related parameters in config file : gpu_intensity, gpu_raw_intensity, gpu_worksize, gpu_threads, gpu_tweak_profile, gpu_target_temperature, gpu_shutdown_temperature, gpu_off_temperature. 'gpu_conf' parameters naming stays the same.
+ Added new parameters in config file : cpu_threads, cpu_affinity, cpu_priority
+ Renamed 'pool_use_tls' in pool configuration file to 'tls'

- Kadena algo is now again profitable to mine with GPU (at least for some time), so try it out!

- From this version i added the gpu_ prefix to all parameters in configuration file that are related to GPU, and used outside gpu_conf. Parameters inside 'gpu_conf' stayed the same.

- Also added possibility to set basic CPU parameters in configuration file ( cpu_threads, cpu_affinity, cpu_priority )
newbie
Activity: 315
Merit: 0
February 29, 2020, 04:28:00 AM
No, restart not solve the problem. This error at least few months old =)

https://i.imgur.com/DlMTs6X.png
hero member
Activity: 2422
Merit: 625
February 28, 2020, 08:47:47 AM

Quote
CPU0: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz [L3:6144 KB][L2:256 KB][L1:32 KB]
--------------------------------------------------------------------------------
SRBMiner-MULTI 0.3.5
--------------------------------------------------------------------------------
Algorithm               : randomsfx
Gpu mining              : disabled
Cpu mining              : enabled
Huge-pages              : enabled
HW-Aes                  : available
Startup monitor         : enabled

[2020-02-22 09:32:50] Tweaking disabled - no supported devices found
[2020-02-22 09:32:50] RandomX MSR tweaking disabled. Unknown error happened.
[2020-02-22 09:32:51] 4 CPU core/s - 4 thread/s detected
[2020-02-22 09:32:51] Using 3 thread/s for CPU mining
[2020-02-22 09:32:51] Initialising dataset & cache & vm
[2020-02-22 09:32:51] Insufficient system resources available to allocate 2129920 kB in large-page memory

Last line means SRBMiner can work with huge pages only on AMD Zen platform?

It just means that Windows could not allocate 2+ GB in large page area , so basically a computer restart solves this Smiley
newbie
Activity: 315
Merit: 0
February 28, 2020, 03:20:19 AM
@doktor83

Hi, what about my question? ^^

Oh, a little googling could help you there, but let me answer then : large (or huge) pages is neither L2 or L3 cache.
When you download SRBMiner for windows theres a folder 'Docs' where you can find Enable-Huge-Pages.txt file, which explains how you can enable large pages on windows.

Yes, i know how to enable huge pages. My question was about this debug output:

Quote
CPU0: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz [L3:6144 KB][L2:256 KB][L1:32 KB]
--------------------------------------------------------------------------------
SRBMiner-MULTI 0.3.5
--------------------------------------------------------------------------------
Algorithm               : randomsfx
Gpu mining              : disabled
Cpu mining              : enabled
Huge-pages              : enabled
HW-Aes                  : available
Startup monitor         : enabled

[2020-02-22 09:32:50] Tweaking disabled - no supported devices found
[2020-02-22 09:32:50] RandomX MSR tweaking disabled. Unknown error happened.
[2020-02-22 09:32:51] 4 CPU core/s - 4 thread/s detected
[2020-02-22 09:32:51] Using 3 thread/s for CPU mining
[2020-02-22 09:32:51] Initialising dataset & cache & vm
[2020-02-22 09:32:51] Insufficient system resources available to allocate 2129920 kB in large-page memory

Last line means SRBMiner can work with huge pages only on AMD Zen platform?
hero member
Activity: 2422
Merit: 625
February 27, 2020, 03:25:12 AM
Here's a video tutorial on how to mine Scala XLA with SRBMiner.
It is 3x profitable than mining it with the official miner.

https://youtu.be/8mta1ztnDs0
hero member
Activity: 2422
Merit: 625
February 27, 2020, 03:22:37 AM
@doktor83

Hi, what about my question? ^^

Oh, a little googling could help you there, but let me answer then : large (or huge) pages is neither L2 or L3 cache.
When you download SRBMiner for windows theres a folder 'Docs' where you can find Enable-Huge-Pages.txt file, which explains how you can enable large pages on windows.
newbie
Activity: 315
Merit: 0
February 27, 2020, 03:08:44 AM
@doktor83

Hi, what about my question? ^^
hero member
Activity: 2422
Merit: 625
February 26, 2020, 06:44:44 AM
V0.3.6
+ 'cryptonight_bbc' algorithm updated (active from block 133060)
+ Added '--enable-opencl-cleanup' parameter to enable OpenCL resources freeing on miner exit/restart (default is disabled because it can hang miner if driver crashed)

- BigBangCore changed algorithm again, and this time it is much better on GPU. To be able to mine it you need to have a verified wallet on their official pool ( http://bbc01.bbcpool.io/ )
newbie
Activity: 315
Merit: 0
February 22, 2020, 03:36:58 AM
Is "Large Pages" L2 or L3 cache?

Quote
CPU0: Intel(R) Core(TM) i5-4670 CPU @ 3.40GHz [L3:6144 KB][L2:256 KB][L1:32 KB]
--------------------------------------------------------------------------------
SRBMiner-MULTI 0.3.5
--------------------------------------------------------------------------------
Algorithm               : randomsfx
Gpu mining              : disabled
Cpu mining              : enabled
Huge-pages              : enabled
HW-Aes                  : available
Startup monitor         : enabled

[2020-02-22 09:32:50] Tweaking disabled - no supported devices found
[2020-02-22 09:32:50] RandomX MSR tweaking disabled. Unknown error happened.
[2020-02-22 09:32:51] 4 CPU core/s - 4 thread/s detected
[2020-02-22 09:32:51] Using 3 thread/s for CPU mining
[2020-02-22 09:32:51] Initialising dataset & cache & vm
[2020-02-22 09:32:51] Insufficient system resources available to allocate 2129920 kB in large-page memory
hero member
Activity: 2422
Merit: 625
February 20, 2020, 08:52:51 AM
V0.3.5
+ Added 'cryptonight_bbc' algorithm (BigBangCore) - DevFee 2.5%
+ Lowered devfee for 'bl2bsha3' to 2%
+ Some gpu's might get a tiny hashrate increase on 'bl2bsha3'
+ Gpu sensors now available in Linux
+ --adl-disable parameter now available in Linux
+ --shutdown-temperature parameter (shutdown_temperature in config) now available in Linux
+ --gpu-off-temperature parameter (off_temperature in config) now available in Linux
+ Removed option to set difficulty for 'bl2bsha3' in password field
+ Removed notification for 6block stratum compatibility
+ Possibly fixed a bug where miner shows it's hashing (always shows exactly same hashrate), but gpu's are stalled
member
Activity: 618
Merit: 21
February 19, 2020, 11:43:47 AM
Latest release is a good solution for Handshake mining. RX580 gives about 140-150 mh/s. If HNS coin will have such a price next days it will be favourite crypto for miners.
newbie
Activity: 14
Merit: 0
February 19, 2020, 09:41:11 AM
SRBMiner great miner!
hero member
Activity: 2422
Merit: 625
February 17, 2020, 05:02:06 AM
V0.3.4
+ Fixed share accepted/rejected display issue with 6block pool (HNS)
+ Fixed miner auto restarting issue on Linux
+ Tiny hashrate increase on 'bl2bsha3' with some GPU's
hero member
Activity: 2422
Merit: 625
February 17, 2020, 01:45:14 AM
If mining HANDSHAKE and you suddenly got miner show all rejected shares, dont worry they are not rejected. Pool changed the message they send back to the miner on successful/rejected shares, and now miner thinks it rejected, but in reality it isnt. You should verify this by having a hashrate displayed on your 6block account on their dashboard
newbie
Activity: 49
Merit: 0
February 16, 2020, 06:00:12 PM
Hi! I have strange problem on two rigs(other rigs not have this problem). The miner doesn’t show the hashrate at all, it hasn’t shown it for a day and I don’t know which hash it works with so far. Hot keys like "h" or "s" also do not work. But the miner himself sends the shares and works. What wrong and how to solve this problem?

This is indeed strange, because it should display the hashrate every 2 minutes automatically.
Have you tried.. restarting it ? Also is it on Windows or Linux ?


Of course  tried and even rebooted the system. Windows 10 is everywhere. 7 rigs work fine but three have these problems and I don’t know what to do with it.
Pages:
Jump to: