SRBMiner-MULTI GPU & CPU Miner 0.9.4 - page 51.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: fenomenyaa on May 12, 2020, 11:34:56 AM

Quote from: doktor83 on May 11, 2020, 11:39:44 PM

Quote from: fenomenyaa on May 11, 2020, 03:03:18 PM

Quote from: doktor83 on May 10, 2020, 12:02:23 AM

Quote from: fenomenyaa on May 09, 2020, 04:41:00 PM

What's typical hash for rx5700 in this miner ?

It depends how you modded your card, but 5700 xt can do around 59mhs

Hi Doc,
just tried SRB :55.7 PM:57.3 in miner screen, 5700 non XT 1400 core 930 mem

Did you use default settings ? Because defaults are set too low (intensity 22), 24-25 should be a good value.

Changed intensity in config file same result on win10

Code:

{
"algorithm" : "ethash",
"disable_cpu" : true,
"disable_gpu" : false,
"intensity" : 24,
}

It's not "intensity" anymore, now it is "gpu_intensity"

fenomenyaa

jr. member

Activity: 131

Merit: 2

Quote from: doktor83 on May 11, 2020, 11:39:44 PM

Quote from: fenomenyaa on May 11, 2020, 03:03:18 PM

Quote from: doktor83 on May 10, 2020, 12:02:23 AM

Quote from: fenomenyaa on May 09, 2020, 04:41:00 PM

What's typical hash for rx5700 in this miner ?

It depends how you modded your card, but 5700 xt can do around 59mhs

Hi Doc,
just tried SRB :55.7 PM:57.3 in miner screen, 5700 non XT 1400 core 930 mem

Did you use default settings ? Because defaults are set too low (intensity 22), 24-25 should be a good value.

Changed intensity in config file same result on win10

Code:

{
"algorithm" : "ethash",
"disable_cpu" : true,
"disable_gpu" : false,
"intensity" : 24,
}

xMindx163

newbie

Activity: 37

Merit: 0

-- gpu-intensity 23 (and others) does not apply (Windows, console). And if I have parallel mining on the processor (by another miner), the hashrate falls. However, xmrig has the lowest priority in the configuration.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: fenomenyaa on May 11, 2020, 03:03:18 PM

Quote from: doktor83 on May 10, 2020, 12:02:23 AM

Quote from: fenomenyaa on May 09, 2020, 04:41:00 PM

What's typical hash for rx5700 in this miner ?

It depends how you modded your card, but 5700 xt can do around 59mhs

Hi Doc,
just tried SRB :55.7 PM:57.3 in miner screen, 5700 non XT 1400 core 930 mem

Did you use default settings ? Because defaults are set too low (intensity 22), 24-25 should be a good value.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: BoozyTalking on May 11, 2020, 03:51:21 AM

And one more thing - i found some strange thing with srbminer-multi (currently only tested with RandomSFX algo), when my miner window is minimized then hashrate is double or tripple less then miner window is restored/focused. Is it possible?

It is probably related to cpu priority, by default it is set to 'below normal'. Try setting it to above normal (--cpu-priority 4 if using cmd parameters, or cpu_priority 4 in config file)

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: abg00 on May 10, 2020, 01:51:11 PM

intensity default
overclocking same as claymore and phoenix and work fine with better hr\power wihout bad shares

I am not validating shares before sending them to the pool, probably that's the 'bad shares'. Next release will fix this.

fenomenyaa

jr. member

Activity: 131

Merit: 2

Quote from: doktor83 on May 10, 2020, 12:02:23 AM

Quote from: fenomenyaa on May 09, 2020, 04:41:00 PM

What's typical hash for rx5700 in this miner ?

It depends how you modded your card, but 5700 xt can do around 59mhs

Hi Doc,
just tried SRB :55.7 PM:57.3 in miner screen, 5700 non XT 1400 core 930 mem

BoozyTalking

newbie

Activity: 315

Merit: 0

And one more thing - i found some strange thing with srbminer-multi (currently only tested with RandomSFX algo), when my miner window is minimized then hashrate is double or tripple less then miner window is restored/focused. Is it possible?
P.S. Windows 10, Ryzen 5 1600.

Quote

-- restored window --
[2020-05-11 10:26:58] CPU result accepted [138ms]
[2020-05-11 10:27:01] CPU result accepted [122ms]
[2020-05-11 10:27:01] CPU : 2803.46 H/s
[2020-05-11 10:27:01] Total: 2803.46 H/s
[2020-05-11 10:27:22] CPU result accepted [131ms]
[2020-05-11 10:27:39] CPU : 2782.93 H/s
[2020-05-11 10:27:39] Total: 2782.93 H/s
[2020-05-11 10:28:24] CPU result accepted [139ms]
[2020-05-11 10:28:25] Difficulty changed to 22088.00000000
[2020-05-11 10:28:25] New job received [427354024], block height 444422
-- minimized window --
[2020-05-11 10:28:29] CPU result accepted [123ms]
[2020-05-11 10:28:42] CPU result accepted [87ms]
[2020-05-11 10:28:46] CPU result accepted [122ms]
[2020-05-11 10:28:49] CPU result accepted [120ms]
[2020-05-11 10:28:58] CPU result accepted [84ms]
[2020-05-11 10:29:01] CPU result accepted [122ms]
[2020-05-11 10:29:34] CPU result accepted [129ms]
[2020-05-11 10:30:04] CPU result accepted [82ms]
[2020-05-11 10:30:09] CPU result accepted [121ms]
[2020-05-11 10:30:09] CPU result accepted [298ms]
[2020-05-11 10:30:37] CPU result accepted [81ms]
[2020-05-11 10:30:39] CPU : 1401.59 H/s
[2020-05-11 10:30:39] Total: 1401.59 H/s
[2020-05-11 10:30:59] CPU result accepted [85ms]
[2020-05-11 10:31:07] CPU result accepted [82ms]
[2020-05-11 10:31:38] CPU result accepted [85ms]
[2020-05-11 10:32:11] CPU result accepted [115ms]
.................
[2020-05-11 10:42:25] New job received [469159754], block height 444428
[2020-05-11 10:42:28] CPU result accepted [85ms]
[2020-05-11 10:42:33] New job received [689554317], block height 444429
[2020-05-11 10:42:39] CPU result accepted [84ms]
[2020-05-11 10:42:39] CPU : 1378.88 H/s
[2020-05-11 10:42:39] Total: 1378.88 H/s
[2020-05-11 10:42:44] CPU result accepted [81ms]
[2020-05-11 10:42:49] CPU result accepted [81ms]
[2020-05-11 10:42:51] CPU result accepted [81ms]
[2020-05-11 10:42:57] CPU result accepted [83ms]
[2020-05-11 10:42:57] New job received [861821654], block height 444430
[2020-05-11 10:43:22] CPU result accepted [126ms]
[2020-05-11 10:43:40] CPU result accepted [80ms]
[2020-05-11 10:43:41] CPU result accepted [117ms]
[2020-05-11 10:43:42] CPU result accepted [90ms]
[2020-05-11 10:44:02] CPU result accepted [118ms]
[2020-05-11 10:44:06] CPU result accepted [103ms]
[2020-05-11 10:44:10] New job received [956063922], block height 444431
[2020-05-11 10:44:11] CPU result accepted [82ms]
[2020-05-11 10:44:27] CPU result accepted [83ms]
[2020-05-11 10:44:31] CPU result accepted [81ms]
[2020-05-11 10:44:35] CPU result accepted [120ms]
[2020-05-11 10:44:36] CPU result accepted [89ms]
-- restored window --
[2020-05-11 10:44:46] New job received [153163839], block height 444432
[2020-05-11 10:44:59] CPU result accepted [81ms]
[2020-05-11 10:45:02] CPU result accepted [82ms]
[2020-05-11 10:45:23] CPU result accepted [83ms]
[2020-05-11 10:45:39] CPU : 2062.76 H/s
[2020-05-11 10:45:39] Total: 2062.76 H/s
[2020-05-11 10:45:41] CPU result accepted [80ms]

BoozyTalking

newbie

Activity: 315

Merit: 0

Quote from: doktor83 on May 09, 2020, 01:36:34 PM

Here's a short tutorial on how :

Mine BBC on CNPool.cc, when the mining port closes, switch to mining Ethereum on Beepool.org, and when BBC pool becomes again available, automatically switch back to it

1. Rename algorithms_example.txt to algorithms.txt

2. Create start-algoswitch.bat containing : (windows)

Code:

setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100

@echo off

SRBMiner-MULTI.exe --config-file Config\config-cryptonight-bbc.txt --pools-file Pools\autoswitch.txt

3. Go in Pools folder and create autoswitch.txt containing :

Code:

{
"pools" :
[ 
	{
		"pool" : "pool.bbc.cnpool.cc:33589",
		"wallet" : "put-your-bbc-wallet-here",
		"password" : "x",
		"algorithm": "cryptonight_bbc",
		"worker": "bbc-worker-name"
	},
	{
		"pool" : "eth-pool.beepool.org:9530", 
		"wallet" : "put-your-ethereum-wallet-here", 
		"password" : "x",
		"algorithm": "ethash",
		"worker": "eth-worker-name"
	}
]
}

4. Run start-algoswitch.bat and don't change pool manually! It is very important to leave miner trying to reconnect when pool get's unavailable. It will automatically switch to Beepool after a few tries.
If you switch pool's manually, miner will not try to reconnect back to main pool (cnpool)!

You can do this with any algorithm combination, i used BBC/ETH because they are the most profitable at the moment.

Good job! Can you take a look to progpow092 algo and epic cash coin?
It work with 3 algos - cuckaroo, progpow092 and randomX.
Will be very good if you add auto switch for progpow092 and ethash (for now this work only in one miner - TT-miner for nvidia).

abg00

jr. member

Activity: 288

Merit: 1

Quote from: doktor83 on May 10, 2020, 01:02:51 PM

Take back on intensity or overclocking, you are producing bad shares (share above target).

intensity default
overclocking same as claymore and phoenix and work fine with better hr\power wihout bad shares

stat from claymore miner

ETH - Total Speed: 373.770 Mh/s, Total Shares: 132(6+10+18+7+7+12+9+16+14+11+10+12), Rejected: 1(0+0+0+0+0+0+0+0+1+0+0+0), Time: 00:44
ETH: GPU0 30.484 Mh/s, GPU1 31.325 Mh/s, GPU2 31.294 Mh/s, GPU3 31.325 Mh/s, GPU4 30.800 Mh/s, GPU5 31.336 Mh/s, GPU6 31.281 Mh/s, GPU7 31.268 Mh/s, GPU8 30.813 Mh/s, GPU9 31.250 Mh/s, GPU10 31.333 Mh/s, GPU11 31.259 Mh/s
Incorrect ETH shares: GPU0 1
1 minute average ETH total speed: 373.612 Mh/s
Pool switches: ETH - 0
Pool shares accepting time (1 hour stats) - min 31 ms, max 375 ms, average 58 ms
Current ETH share target: 0x000000007fff8000 (diff: 8590MH), epoch 0(1.00GB)

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: abg00 on May 10, 2020, 12:01:00 PM

lot of reject share on nice

Pool : daggerhashimoto.eu.nicehash.com:3353
Connected since : 2020-05-10 19:20:17
Pool Difficulty : 1.000000
Pool latency : ~ 48 ms

Shares
-------------------------------------------------------------------
Accepted : 22 [75.9%]
Total : 29
Avg find time : 83 sec

1 min. avg : 55.74 MH/s
5 min. avg : 55.23 MH/s
15 min. avg : 55.25 MH/s
Max. speed : 58.23 MH/s

Pool Errors
-----------
[2] : Job not found.
[5] : Share above target.

Take back on intensity or overclocking, you are producing bad shares (share above target).

abg00

jr. member

Activity: 288

Merit: 1

check on test rig
clay rate 31.3 mh
this miner rate 29.8 same as phoenix
power same as claymore

in additional
job not found on dag switch

abg00

jr. member

Activity: 288

Merit: 1

lot of reject share on nice

Pool : daggerhashimoto.eu.nicehash.com:3353
Connected since : 2020-05-10 19:20:17
Pool Difficulty : 1.000000
Pool latency : ~ 48 ms

Shares
-------------------------------------------------------------------
Accepted : 22 [75.9%]
Total : 29
Avg find time : 83 sec

1 min. avg : 55.74 MH/s
5 min. avg : 55.23 MH/s
15 min. avg : 55.25 MH/s
Max. speed : 58.23 MH/s

Pool Errors
-----------
[2] : Job not found.
[5] : Share above target.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: fenomenyaa on May 09, 2020, 04:41:00 PM

What's typical hash for rx5700 in this miner ?

It depends how you modded your card, but 5700 xt can do around 59mhs

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: big_daddy on May 09, 2020, 03:14:28 PM

Quote from: doktor83 on May 09, 2020, 01:36:34 PM

~

Hey Doc,

is this setup possible to run on simplemining also? I was just looking for a dual mining option that is profitable, nowdays it's very difficult to find one

This is not dual mining, it is an auto-switch-back to the main pool when it gets available (because BBC works this way - when quota is exhausted pool closes port), but until then miner mines on a different algorithm, better than just trying to reconnect to the pool )

fenomenyaa

jr. member

Activity: 131

Merit: 2

Quote from: doktor83 on May 09, 2020, 12:28:33 PM

V0.4.4

+ added 'ethash' algorithm
+ added 'ubqhash' algorithm
+ added parameter '--esm' to set ethash/ubqhash stratum mode for pool (0 - eth-proxy, 1 - miner-proxy)
+ added parameter 'esm' to pools config (ethash/ubqhash stratum mode for pool (0 - eth-proxy, 1 - miner-proxy))
+ added parameter '--enable-ethash-leak-fix' which tries to workaround AMD driver memory leak when recreating DAG
+ fixed algo switching and tweak_profiles miner freeze bug
+ --gpu-tweak-profile option can now be used with auto gpu setup in cmd

I'm a little too late with adding ethash right ?

If you have a Navi based gpu then you will be happy because SRB is now probably the fastest ETHASH and UBQHASH miner on those (RX 5500/5600/5700 supported).
All this thanks to Wolf9466.

Of course Vega56/64, RX4xx/5xx also work, but since the stuff is written in OpenCL, and not in ASM as in other ETHASH miners, your hashrate can/will be lower.
In this case 'tweak_profile' parameter can be your good friend.

4GB cards will probably work a few epochs longer than on other miners.

Oh and Ethash works with nicehash and their weird protocols.

What's typical hash for rx5700 in this miner ?

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: doktor83 on May 09, 2020, 01:36:34 PM

~

Hey Doc,

is this setup possible to run on simplemining also? I was just looking for a dual mining option that is profitable, nowdays it's very difficult to find one

doktor83

hero member

Activity: 2548

Merit: 626

Here's a short tutorial on how :

Mine BBC on CNPool.cc, when the mining port closes, switch to mining Ethereum on Beepool.org, and when BBC pool becomes again available, automatically switch back to it

1. Rename algorithms_example.txt to algorithms.txt

2. Create start-algoswitch.bat containing : (windows)

Code:

setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100

@echo off

SRBMiner-MULTI.exe --config-file Config\config-cryptonight-bbc.txt --pools-file Pools\autoswitch.txt

3. Go in Pools folder and create autoswitch.txt containing :

Code:

{
"pools" :
[ 
	{
		"pool" : "pool.bbc.cnpool.cc:33589",
		"wallet" : "put-your-bbc-wallet-here",
		"password" : "x",
		"algorithm": "cryptonight_bbc",
		"worker": "bbc-worker-name"
	},
	{
		"pool" : "eth-pool.beepool.org:9530", 
		"wallet" : "put-your-ethereum-wallet-here", 
		"password" : "x",
		"algorithm": "ethash",
		"worker": "eth-worker-name"
	}
]
}

4. Run start-algoswitch.bat and don't change pool manually! It is very important to leave miner trying to reconnect when pool get's unavailable. It will automatically switch to Beepool after a few tries.
If you switch pool's manually, miner will not try to reconnect back to main pool (cnpool)!

You can do this with any algorithm combination, i used BBC/ETH because they are the most profitable at the moment.

doktor83

hero member

Activity: 2548

Merit: 626

V0.4.4

+ added 'ethash' algorithm
+ added 'ubqhash' algorithm
+ added parameter '--esm' to set ethash/ubqhash stratum mode for pool (0 - eth-proxy, 1 - miner-proxy)
+ added parameter 'esm' to pools config (ethash/ubqhash stratum mode for pool (0 - eth-proxy, 1 - miner-proxy))
+ added parameter '--enable-ethash-leak-fix' which tries to workaround AMD driver memory leak when recreating DAG
+ fixed algo switching and tweak_profiles miner freeze bug
+ --gpu-tweak-profile option can now be used with auto gpu setup in cmd

I'm a little too late with adding ethash right ?

If you have a Navi based gpu then you will be happy because SRB is now probably the fastest ETHASH and UBQHASH miner on those (RX 5500/5600/5700 supported).
All this thanks to Wolf9466.

Of course Vega56/64, RX4xx/5xx also work, but since the stuff is written in OpenCL, and not in ASM as in other ETHASH miners, your hashrate can/will be lower.
In this case 'tweak_profile' parameter can be your good friend.

4GB cards will probably work a few epochs longer than on other miners.

Oh and Ethash works with nicehash and their weird protocols.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: BoozyTalking on April 15, 2020, 02:00:41 AM

[2020-04-15 09:56:11] CPU result accepted [143ms]
[2020-04-15 09:57:30] CPU result rejected [rejected share: invalid result]
[2020-04-15 09:57:41] CPU result rejected [rejected share: invalid result]
[2020-04-15 09:58:01] New job received [575862330203432]
[2020-04-15 09:58:21] CPU result rejected [rejected share: invalid result]
[2020-04-15 09:58:35] CPU : 410.19 H/s
[2020-04-15 09:58:35] Total: 410.19 H/s
[2020-04-15 09:58:38] CPU result rejected [rejected share: invalid result]
[2020-04-15 09:58:40] CPU result rejected [rejected share: invalid result]

Is it always like this after few minutes, or ?

Topic: SRBMiner-MULTI GPU & CPU Miner 0.9.4 - page 51. (Read 45097 times)