Pages:
Author

Topic: SRBPolaris V3.5 - BIOS editor for AMD RX4XX and RX5XX cards - page 3. (Read 125165 times)

sr. member
Activity: 1414
Merit: 270
Undeads.com - P2E Runner Game
my other cards are ASIC Quality: 73.5 %  im getting 31mh/s from it
good lesson always buy msi cards Cheesy

My Asus RX480 Strix OC
ASIC Quality
GPU   Ellesmere
Rating   87.2%

Slightly adjusted the settings - resulting in 2060MHz hasrate was 30 MH/s but in HWINFO a lot of mistakes. Starting from 2050MHz errors are coming. Although I'm sure that in the "right" hands, the card will be able to give 31MH/s.

full member
Activity: 228
Merit: 100
my other cards are ASIC Quality: 73.5 %  im getting 31mh/s from it
good lesson always buy msi cards Cheesy
full member
Activity: 1120
Merit: 131
Can you check this GPU ASIC percentage with GPU-Z ? Weak silicon can be the source of this low hashrate. One of my 570s is unable to reach 30MH/s, the 2 others can sometimes reach 31.5MH/s (average 31MH/s).

ASIC Quality: 70.1 %


My worst is 70,5% and is far from the 2 other GPUs wether it's ETC/ETH, Neoscrypt or CN cryptos (100H/s worse in CN V7). You may not be able to extract much more speed from it.
full member
Activity: 228
Merit: 100
Can you check this GPU ASIC percentage with GPU-Z ? Weak silicon can be the source of this low hashrate. One of my 570s is unable to reach 30MH/s, the 2 others can sometimes reach 31.5MH/s (average 31MH/s).

ASIC Quality: 70.1 %
full member
Activity: 1120
Merit: 131
Can you check this GPU ASIC percentage with GPU-Z ? Weak silicon can be the source of this low hashrate. One of my 570s is unable to reach 30MH/s, the 2 others can sometimes reach 31.5MH/s (average 31MH/s).
full member
Activity: 228
Merit: 100
Try to apply the 1500 strap to 2100MHz

and where do you do that ? never have see 2100

Change the strap, make 2000 into 2100.
Click on the 2000MHz strap, it will then appear close to "APPLY CHG" with the current values.
1st line the frequency: 2000.
2nd line the strap: 777000000...................
Replace 2000 by 2100, then click on "APPLY CHG". You'll see the new strap at 2100MHz. Once you're done with the other mods, save your bios and rename it in a conveniant way.
Then flash.

yes i have done it but still no higher hashrate 29.3 been upping the memory from 2000 to 2250 no increase what so ever
thanks for your help dude
full member
Activity: 1120
Merit: 131
Try to apply the 1500 strap to 2100MHz

and where do you do that ? never have see 2100

Change the strap, make 2000 into 2100.
Click on the 2000MHz strap, it will then appear close to "APPLY CHG" with the current values.
1st line the frequency: 2000.
2nd line the strap: 777000000...................
Replace 2000 by 2100, then click on "APPLY CHG". You'll see the new strap at 2100MHz. Once you're done with the other mods, save your bios and rename it in a conveniant way.
Then flash.
full member
Activity: 228
Merit: 100
Try to apply the 1500 strap to 2100MHz

and where do you do that ? never have see 2100
full member
Activity: 228
Merit: 100
i have the asus rx 480 strix 8 gb i dont get higher then 27mh/s what i change with the memory the hashrate dont change at all
maybe anyone can help me ??

My RX480 Strix gives 29MH/s. BIOS modified with PBE 1.6.7 through button "One click timing patch".  Frequency memory and core is not changed. All other settings are also default.



reduce core go up memory clock
better hash

yes i did that i got the same hashrate now down the core and play with the memory and it dont do nothing with the hashrate
newbie
Activity: 197
Merit: 0
i have the asus rx 480 strix 8 gb i dont get higher then 27mh/s what i change with the memory the hashrate dont change at all
maybe anyone can help me ??

My RX480 Strix gives 29MH/s. BIOS modified with PBE 1.6.7 through button "One click timing patch".  Frequency memory and core is not changed. All other settings are also default.

https://i.imgur.com/8GcHhCD.jpg

reduce core go up memory clock
better hash
sr. member
Activity: 1414
Merit: 270
Undeads.com - P2E Runner Game
i have the asus rx 480 strix 8 gb i dont get higher then 27mh/s what i change with the memory the hashrate dont change at all
maybe anyone can help me ??

My RX480 Strix gives 29MH/s. BIOS modified with PBE 1.6.7 through button "One click timing patch".  Frequency memory and core is not changed. All other settings are also default.

full member
Activity: 1120
Merit: 131
Try to apply the 1500 strap to 2100MHz
full member
Activity: 228
Merit: 100
You have to OC your memory, try 2100MHz then upgrade by steps of 10MHz until your card is not stable. Copy also your 1500MHz mem strap to all other straps above 1500MHz. Keep the fastest stable setting.

Core clock can be lowered to 1150MHz.

i did that all already copy all straps type 1500 to 2000  1750 to 2000 i dont get any higher then 29.2mh/s and when i try to OC my memory it even get slower
 i realy hate this card all my msi cards goes 31mh/s
full member
Activity: 1120
Merit: 131
You have to OC your memory, try 2100MHz then upgrade by steps of 10MHz until your card is not stable. Copy also your 1500MHz mem strap to all other straps above 1500MHz. Keep the fastest stable setting.

Core clock can be lowered to 1150MHz.
full member
Activity: 228
Merit: 100
i have the asus rx 480 strix 8 gb i dont get higher then 27mh/s what i change with the memory the hashrate dont change at all
maybe anyone can help me ??
newbie
Activity: 2
Merit: 0
I have 6 RX580 8gb cards.. I just finished modding one.. but for some reason my original mhs was 20-21.5 now it went up to 23.5mh/s ... How are some people getting close to or over 30mh/s??

any help will be highly appreciated.


Easily...find good strap, flash bios, OC as far as it go, use latest drivers and mining program, don't forget to choose "compute"




thanks Branko! I'm really new on the mining world.. I am currently using SMOS with suprnova mining pool. when i was mining ether my hash/card were about 26mhs-27mhs.... still not mining, where i want it to be
full member
Activity: 1120
Merit: 131
Doctor, winatiflash 2.77 being broken with win 10 1803 build, do you think you can transform your editor to also make it flash bioses ?
sr. member
Activity: 2632
Merit: 328
I have 6 RX580 8gb cards.. I just finished modding one.. but for some reason my original mhs was 20-21.5 now it went up to 23.5mh/s ... How are some people getting close to or over 30mh/s??

any help will be highly appreciated.


Easily...find good strap, flash bios, OC as far as it go, use latest drivers and mining program, don't forget to choose "compute"
newbie
Activity: 2
Merit: 0
I have 6 RX580 8gb cards.. I just finished modding one.. but for some reason my original mhs was 20-21.5 now it went up to 23.5mh/s ... How are some people getting close to or over 30mh/s??

any help will be highly appreciated.
newbie
Activity: 1
Merit: 0
Hi @doktor83

Got a gigabyte gpu from a friend few days ago.
GV-RX580GAMING-8GD/F91/068B
Here is the stock bios: https://drive.google.com/file/d/19RL7fIsFMaQlPAieBYxFEThy4to4Grab/view?usp=sharing

Can u pls help me modding it.
thanks in advance

Pages:
Jump to: