how i can get coins?
At the moment:
By mining it, running a masternode or buy via exchange platform at https://coinsmarkets.com/trade-BTC-SUCR.htm
the first two need expertise.
Topic: Sucre (SUCR) X11 based cryptocurrency POW, Masternode, Private and Instant Send - page 27. (Read 40806 times)
December 26, 2017, 10:19:43 PM
At the moment:
By mining it, running a masternode or buy via exchange platform at https://coinsmarkets.com/trade-BTC-SUCR.htm
the first two need expertise.
December 26, 2017, 10:15:49 PM
Had to removed 2 Block explorers from the list.
Page not found: http://202.5.23.130:98 (hope this is not a cash the bounty and run! will have to rethink this bounty thing)
Bad reporting blocks: http://cdpool.xyz:3002 (please fix this)
Working fine Block Explorer: http://pool.penza.me:3001
December 26, 2017, 10:11:40 PM
Thank you, just added to the main website.
December 26, 2017, 09:46:24 PM
December 26, 2017, 08:41:37 PM
Just finished setup the masternode.
Not the easiest to setup and I know that some people have issues in the discord.
It would be good to have you in the discord aswell as some mods to create those channels and ranks.
Thanks
Not the easiest to setup and I know that some people have issues in the discord.
It would be good to have you in the discord aswell as some mods to create those channels and ranks.
Thanks
December 26, 2017, 07:40:29 PM
Hello,
It would be awesome if you could pick some people(including me hihi) to tidy up that discord server..
Adding some roles would be nice, adding some channels aswell as an annoucement channel, it would be really encouraging
Cheers
It would be awesome if you could pick some people(including me hihi) to tidy up that discord server..
Adding some roles would be nice, adding some channels aswell as an annoucement channel, it would be really encouraging
Cheers
December 26, 2017, 07:31:44 PM
Is the Block explorer for this coin working OK?
I've checked here
http://202.5.23.130:98/network
I have checked a few of my receive addresses and I keep getting an error
---------------------------------------------------------------------------------
Nevermind I've managed to find the block explorer address that works
http://pool.penza.me:3001/
only one out of three block explorers are working properly that are listed on their website
This one lets you search and returns information, other address http://202.5.23.130:98/network - search needs fixing.
Thanks
I've checked here
http://202.5.23.130:98/network
I have checked a few of my receive addresses and I keep getting an error
---------------------------------------------------------------------------------
Nevermind I've managed to find the block explorer address that works
http://pool.penza.me:3001/
only one out of three block explorers are working properly that are listed on their website
This one lets you search and returns information, other address http://202.5.23.130:98/network - search needs fixing.
Thanks
December 26, 2017, 06:18:44 PM
Guys, tell me who was able to fully launch the main node in the windows?
December 26, 2017, 04:20:08 PM
how i can get coins?
December 26, 2017, 02:10:33 PM
Please support me
In the master node, when setting is completed and restarted
Displayed that it can be started only with lisson = 0
Can not start with lisson = 1
https://imgur.com/a/ODhSe
https://imgur.com/a/kh9Nu
please tell me:'(
In the master node, when setting is completed and restarted
Displayed that it can be started only with lisson = 0
Can not start with lisson = 1
https://imgur.com/a/ODhSe
https://imgur.com/a/kh9Nu
please tell me:'(
You are trying a different way to run a masternode that I have never tested. You are trying to start a Masternode from that same masternode.
There is probebly other ways to do this but for the moment I support the Masternode Setup guide http://sucremoneda.net/dvbfg/SucreMasternodeBETA.pdf
Other users successfully run nodes on windows server as well.
It is said that we do not support this way
Ubuntu is not good at it, so I do not know well, so
I want to start the master node in this way
Hiho, i'm in the same point as you, MN is up but WATCHDOG_EXPIRED, so we need to find a way to setup sentinel over windows :p I'm looking over the internet, but is hard to find the right files/configs... :9
December 26, 2017, 12:36:59 PM
Please support me
In the master node, when setting is completed and restarted
Displayed that it can be started only with lisson = 0
Can not start with lisson = 1
https://imgur.com/a/ODhSe
https://imgur.com/a/kh9Nu
please tell me:'(
In the master node, when setting is completed and restarted
Displayed that it can be started only with lisson = 0
Can not start with lisson = 1
https://imgur.com/a/ODhSe
https://imgur.com/a/kh9Nu
please tell me:'(
You are trying a different way to run a masternode that I have never tested. You are trying to start a Masternode from that same masternode.
There is probebly other ways to do this but for the moment I support the Masternode Setup guide http://sucremoneda.net/dvbfg/SucreMasternodeBETA.pdf
Other users successfully run nodes on windows server as well.
It is said that we do not support this way
Ubuntu is not good at it, so I do not know well, so
I want to start the master node in this way
December 26, 2017, 12:12:08 PM
I see a transaction under the category "generate" going to the receiving address of the Masternode. Is that the category that the masternode fee gets labeled under? If so, seems to work.
December 26, 2017, 12:06:44 PM
Please support me
In the master node, when setting is completed and restarted
Displayed that it can be started only with lisson = 0
Can not start with lisson = 1
https://imgur.com/a/ODhSe
https://imgur.com/a/kh9Nu
please tell me:'(
In the master node, when setting is completed and restarted
Displayed that it can be started only with lisson = 0
Can not start with lisson = 1
https://imgur.com/a/ODhSe
https://imgur.com/a/kh9Nu
please tell me:'(
You are trying a different way to run a masternode that I have never tested. You are trying to start a Masternode from that same masternode.
There is probebly other ways to do this but for the moment I support the Masternode Setup guide http://sucremoneda.net/dvbfg/SucreMasternodeBETA.pdf
Other users successfully run nodes on windows server as well.
December 26, 2017, 12:02:14 PM
$ sucr-cli masternode debug
Masternode successfully started
This was on the masternode computer.
The client computer (my personal wallet) doesn't show the same message, which I think makes sense.
Masternode successfully started
This was on the masternode computer.
The client computer (my personal wallet) doesn't show the same message, which I think makes sense.
December 26, 2017, 12:00:31 PM
Thanks.
2GB RAM is a steep requirement, especially for Linux, unless there is a way to install multiple nodes and just specify different ports in one VPS. I think this might be one of those coins where you need at least 10 nodes to make a decent passive income from it.
2GB RAM is a steep requirement, especially for Linux, unless there is a way to install multiple nodes and just specify different ports in one VPS. I think this might be one of those coins where you need at least 10 nodes to make a decent passive income from it.
So you don't need 2GB, and you can certainly run other MNs (from other coins) on the same server.
I know one company offering $5/month Raspberry Pi hosting which is about the same as a VPS without shared hardware.
December 26, 2017, 11:55:31 AM
Still the same error, maybe my ubuntu version is too old
What version? work fine on 14.04 and 16.04. prior to that will not work, and 17.04 and 17.10 are to recent and g++ not yet compatible.
December 26, 2017, 11:49:56 AM
Still the same error, maybe my ubuntu version is too old
December 26, 2017, 11:45:08 AM
How often do masternode payments come around at the current amount? Is there any way to "really" check that the masternode we setup is actually working?
well yes, is in the guide page 9. http://sucremoneda.net/dvbfg/SucreMasternodeBETA.pdf
sucr-cli masternode debug
You should see the message "successfully started masternode".
sucr-cli masternode debug
Did it work? You should see the message "successfully started masternode".
Approx 576 blocks per day / currently 199 masternodes = 2.89 payment per day.
December 26, 2017, 11:26:48 AM
Please support me
In the master node, when setting is completed and restarted
Displayed that it can be started only with lisson = 0
Can not start with lisson = 1
https://imgur.com/a/ODhSe
https://imgur.com/a/kh9Nu
please tell me:'(
In the master node, when setting is completed and restarted
Displayed that it can be started only with lisson = 0
Can not start with lisson = 1
https://imgur.com/a/ODhSe
https://imgur.com/a/kh9Nu
please tell me:'(
December 26, 2017, 10:14:40 AM
How often do masternode payments come around at the current amount? Is there any way to "really" check that the masternode we setup is actually working?
Jump to: