Mine was a 1GB of RAM with 512MB of swap. I could've upped the swap, but it was better to just get more RAM. 1 CPU.
1 CPU, 2GB of RAM worked for me.
Topic: Sucre (SUCR) X11 based cryptocurrency POW, Masternode, Private and Instant Send - page 29. (Read 40832 times)
December 25, 2017, 05:26:22 PM
December 25, 2017, 05:12:51 PM
need to add more swap before compile
Or get a higher RAM instance. 2GB worked just fine. The make on a 1GB server blew up for me.
What are your VPS/server specs?
Thanks.
December 25, 2017, 05:10:51 PM
How much more of a swap file?
Does version 14 of uBuntu have similar issue?
Thanks.
Does version 14 of uBuntu have similar issue?
Thanks.
December 25, 2017, 04:57:15 PM
need to add more swap before compile
Or get a higher RAM instance. 2GB worked just fine. The make on a 1GB server blew up for me.
December 25, 2017, 04:41:58 PM
I have the following issue compiling:
Quote
config.status: creating Makefile
config.status: creating libsecp256k1.pc
config.status: creating src/libsecp256k1-config.h
config.status: src/libsecp256k1-config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
=-I. += -Wall -Wextra -Wno-unused-function -c src/gen_context.c -o gen_context.o
/bin/bash: =-I.: command not found
Makefile:1512: recipe for target 'gen_context.o' failed
make[3]: *** [gen_context.o] Error 127
make[3]: Leaving directory '/home/user/SucreCore/src/secp256k1'
Makefile:9940: recipe for target 'secp256k1/libsecp256k1.la' failed
make[2]: *** [secp256k1/libsecp256k1.la] Error 2
make[2]: Leaving directory '/home/user/SucreCore/src'
Makefile:9434: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/user/SucreCore/src'
Makefile:656: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1
config.status: creating libsecp256k1.pc
config.status: creating src/libsecp256k1-config.h
config.status: src/libsecp256k1-config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
=-I. += -Wall -Wextra -Wno-unused-function -c src/gen_context.c -o gen_context.o
/bin/bash: =-I.: command not found
Makefile:1512: recipe for target 'gen_context.o' failed
make[3]: *** [gen_context.o] Error 127
make[3]: Leaving directory '/home/user/SucreCore/src/secp256k1'
Makefile:9940: recipe for target 'secp256k1/libsecp256k1.la' failed
make[2]: *** [secp256k1/libsecp256k1.la] Error 2
make[2]: Leaving directory '/home/user/SucreCore/src'
Makefile:9434: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/user/SucreCore/src'
Makefile:656: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1
What is the version of Ubuntu? and did you follow the procedure exactly like in the guide? (see below)
sudo apt -y update && sudo apt -y install build-essential libssl-dev libdb++-dev libboost-all-dev libcrypto++-dev libqrencode-dev libminiupnpc-dev libgmp-dev libgmp3-dev autoconf autogen automake libtool autotools-dev pkg-config bsdmainutils software-properties-common libzmq3-dev libminiupnpc-dev libssl-dev libevent-dev
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev -y
git clone https://github.com/sucremoneda/SucreCore.git
git clone https://github.com/dashpay/dash.git # (to fix a bug in secp256k1)
rm -rf ~/SucreCore/src/secp256k1
cp -r ~/dash/src/secp256k1 ~/SucreCore/src/secp256k1
cd SucreCore
find . -name "*.sh" -exec sudo chmod 755 {} \;
./autogen.sh
./configure # or ./configure --without-gui
make
Having same error output with Ubuntu 16.04 LTS. Everything is fine up to the 'make' command.
Thanks.
need to add more swap before compile
December 25, 2017, 04:21:28 PM
I have the following issue compiling:
Quote
config.status: creating Makefile
config.status: creating libsecp256k1.pc
config.status: creating src/libsecp256k1-config.h
config.status: src/libsecp256k1-config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
=-I. += -Wall -Wextra -Wno-unused-function -c src/gen_context.c -o gen_context.o
/bin/bash: =-I.: command not found
Makefile:1512: recipe for target 'gen_context.o' failed
make[3]: *** [gen_context.o] Error 127
make[3]: Leaving directory '/home/user/SucreCore/src/secp256k1'
Makefile:9940: recipe for target 'secp256k1/libsecp256k1.la' failed
make[2]: *** [secp256k1/libsecp256k1.la] Error 2
make[2]: Leaving directory '/home/user/SucreCore/src'
Makefile:9434: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/user/SucreCore/src'
Makefile:656: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1
config.status: creating libsecp256k1.pc
config.status: creating src/libsecp256k1-config.h
config.status: src/libsecp256k1-config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
=-I. += -Wall -Wextra -Wno-unused-function -c src/gen_context.c -o gen_context.o
/bin/bash: =-I.: command not found
Makefile:1512: recipe for target 'gen_context.o' failed
make[3]: *** [gen_context.o] Error 127
make[3]: Leaving directory '/home/user/SucreCore/src/secp256k1'
Makefile:9940: recipe for target 'secp256k1/libsecp256k1.la' failed
make[2]: *** [secp256k1/libsecp256k1.la] Error 2
make[2]: Leaving directory '/home/user/SucreCore/src'
Makefile:9434: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/user/SucreCore/src'
Makefile:656: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1
What is the version of Ubuntu? and did you follow the procedure exactly like in the guide? (see below)
sudo apt -y update && sudo apt -y install build-essential libssl-dev libdb++-dev libboost-all-dev libcrypto++-dev libqrencode-dev libminiupnpc-dev libgmp-dev libgmp3-dev autoconf autogen automake libtool autotools-dev pkg-config bsdmainutils software-properties-common libzmq3-dev libminiupnpc-dev libssl-dev libevent-dev
sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev -y
git clone https://github.com/sucremoneda/SucreCore.git
git clone https://github.com/dashpay/dash.git # (to fix a bug in secp256k1)
rm -rf ~/SucreCore/src/secp256k1
cp -r ~/dash/src/secp256k1 ~/SucreCore/src/secp256k1
cd SucreCore
find . -name "*.sh" -exec sudo chmod 755 {} \;
./autogen.sh
./configure # or ./configure --without-gui
make
Having same error output with Ubuntu 16.04 LTS. Everything is fine up to the 'make' command.
Thanks.
December 25, 2017, 03:16:38 PM
Some video lesson to do the masternode, I am lay, but I want to mount 30 masternode
December 25, 2017, 03:13:00 PM
Hi, dont use 17.10 you wont be able to compile daemon, use version 16 and MN guide (the link is in the ANN) and you wull start your MN without problems
Thanks for the response. I'm not talking about the MasterNode part. I have a server with 16.04 for that. I'm talking about the wallet setup (the personal wallet). I don't use Windows.
The wallet software should be able to be built so it runs just like Bitcoincore or Litecoin core does. I'm running KDE, too. QT isn't a problem. I just need to know how to build it correctly.
December 25, 2017, 02:14:38 PM
Hi. This project looks interesting.
I have enough SUCR to start two masternodes... But, I'm a Linux only person.
Can I build a qt wallet on Ubuntu 17.10? I have the Masternode server ready to go on Ubuntu 16.04 (as the instructions specify), but for the wallet, there needs to be a build-able version for the desktop users like myself. My SUCR is resting on an exchange right now until I can get them into a personal wallet.
Anyone on Ubuntu get a wallet working?
I have enough SUCR to start two masternodes... But, I'm a Linux only person.
Can I build a qt wallet on Ubuntu 17.10? I have the Masternode server ready to go on Ubuntu 16.04 (as the instructions specify), but for the wallet, there needs to be a build-able version for the desktop users like myself. My SUCR is resting on an exchange right now until I can get them into a personal wallet.
Anyone on Ubuntu get a wallet working?
Hi, dont use 17.10 you wont be able to compile daemon, use version 16 and MN guide (the link is in the ANN) and you wull start your MN without problems
December 25, 2017, 01:47:37 PM
Hi. This project looks interesting.
I have enough SUCR to start two masternodes... But, I'm a Linux only person.
Can I build a qt wallet on Ubuntu 17.10? I have the Masternode server ready to go on Ubuntu 16.04 (as the instructions specify), but for the wallet, there needs to be a build-able version for the desktop users like myself. My SUCR is resting on an exchange right now until I can get them into a personal wallet.
Anyone on Ubuntu get a wallet working?
I have enough SUCR to start two masternodes... But, I'm a Linux only person.
Can I build a qt wallet on Ubuntu 17.10? I have the Masternode server ready to go on Ubuntu 16.04 (as the instructions specify), but for the wallet, there needs to be a build-able version for the desktop users like myself. My SUCR is resting on an exchange right now until I can get them into a personal wallet.
Anyone on Ubuntu get a wallet working?
December 25, 2017, 12:24:33 PM
Will there be a guide for setting up the masternodes on a windows server?
Will try to find one on the DASH forum because I'm not using any windows servers.
and will add it to the Sucre WIKI coming out in 1Q 2018
maybe this can help https://www.dash.org/forum/threads/guide-simple-masternode-on-a-windows-machine.7956/
remember we are on version 12.2.1 so procedure might be outdated.
Ha лoкaльнoм кoшeлькe Bиндoвc Инcтpyмeнты - КOHCOЛЬ OTКЛAДКИ, ввoдитe кoмaндy:
getnewaddress MasterNode1
oтвeт S......................Q;
sendtoaddress S......................Q 1000
oтвeт 9...................b;
ждeм пoдтвepждeниe oплaты. пoтoм
masternode genkey
J................................a;
masternode outputs
............................ 1
Пepexoдим нa VPS кoшeлeк пoд виндoвc.
Инcтpyмeнты - oткpыть фaйл нacтpoйки кoшeлькa ввoдим
rpcuser=someuser
rpcpassword=somepass
server=1
daemon=1
listen=1
rpcport=9336
rpcallowip=127.0.0.1
masternode=1
masternodeprivkey=J..........................a
externalip=XXX.XXX.XXX.XXX
coxpaняeм, пepeзaпycкaeм.
пepexoдим нa лoкaльный кoшeлeк... ввoдим
MN1 XXX.XXX.XXX.XXX:9336 J...............................a 9...................................b 1
December 25, 2017, 12:13:31 PM
What's max supply?
December 25, 2017, 12:11:17 PM
I successfully launched the master master on windows. Is there a "sentinel" guard under windows?
December 25, 2017, 09:39:55 AM
Will there be a guide for setting up the masternodes on a windows server?
Will try to find one on the DASH forum because I'm not using any windows servers.
and will add it to the Sucre WIKI coming out in 1Q 2018
maybe this can help https://www.dash.org/forum/threads/guide-simple-masternode-on-a-windows-machine.7956/
remember we are on version 12.2.1 so procedure might be outdated.
December 25, 2017, 09:36:02 AM
Speaking on masternodes, are masternode payments missing for today?
You can monitor all masternode payments on block explorer http://cdpool.xyz:3002
Last block 7 minute ago (first one is masternode 2nd is miner)
Address Amount (SUCR)
SgKyukuc56sMrBmUDscVwAD6Mx67fUM9t7 1.35406692
SizgmoUnTmiiHhJ2A73EUH6wJCvNvXWqmQ 3.15948948
There is 2 others (will try to contact the owner, I'm not running any of them)
http://pool.penza.me:3001/
http://202.5.23.130:98/
thx will try it!
December 25, 2017, 09:34:21 AM
Speaking on masternodes, are masternode payments missing for today?
You can monitor all masternode payments on block explorer http://cdpool.xyz:3002
Last block 7 minute ago (first one is masternode 2nd is miner)
Address Amount (SUCR)
SgKyukuc56sMrBmUDscVwAD6Mx67fUM9t7 1.35406692
SizgmoUnTmiiHhJ2A73EUH6wJCvNvXWqmQ 3.15948948
There is 2 others (will try to contact the owner, I'm not running any of them)
http://pool.penza.me:3001/
http://202.5.23.130:98/
December 25, 2017, 09:31:23 AM
Could you put normal paper on the setting masternode. Nothing works.
You understand that there is 172 Masternodes running using that same guide.
What version of Ubuntu are you using?
What is the problem? where do you stall???
You don't give me any information on what it the problem
? So what should I fix? December 25, 2017, 09:26:35 AM
Speaking on masternodes, are masternode payments missing for today?
You can monitor all masternode payments on block explorer http://cdpool.xyz:3002
Last block 7 minute ago (first one is masternode 2nd is miner)
Address Amount (SUCR)
SgKyukuc56sMrBmUDscVwAD6Mx67fUM9t7 1.35406692
SizgmoUnTmiiHhJ2A73EUH6wJCvNvXWqmQ 3.15948948
December 25, 2017, 09:12:43 AM
Sucre Coin Pool
- Stratum : all45.ru:3009 - Diff: 0.5
- Stratum : all45.ru:3254 - Diff: 1
- User : YOUR_ADDRESS
- Password : x
- Website : http://all45.ru/
- Payout : 20 block confirm
- Fee : 0.8 %
December 25, 2017, 06:05:08 AM
Could you put normal paper on the setting masternode. Nothing works.
Jump to: