Author

Topic: Swedish ASIC miner company kncminer.com - page 1008. (Read 3050071 times)

legendary
Activity: 1274
Merit: 1000
Personal text my ass....
November 20, 2013, 05:34:45 PM
And this is exactly why I am having a 200 amp line installed at the new house we just purchased.  

The hash rate stability and the revenue increase outweighs the small expense of getting the hydro company to run the new line.

Thanks for showing the graph, it is nice to see this demonstrated with the numbers to back it up.


You are mighty welcome...
You will see the difference!
  What I did, was install 2 -100 amp sub-panels....one for computers, and the other for the farm.....
so the miners & computers have a dedicated 100 amp line...  all the way...
and installed enough circuits & breakers to ensure I use no more than 60% of the rated draw on a 20 amp breaker...
(2200watts... I try to use only 1200-1300 per)... so like only 2 jupiters per 20 amp breaker
Now I'm ready for those November babies!  Rush it! Haaaa
Because every BIT counts.... Har-deee-harrrrrr
Here's the entire graph if you're curious...
http://eligius.st/~wizkid057/newstats/userstats.php/1LnqQzhbp1udcqByNZWnveHXJorDuJHWRs
The last 12 hours is all its been hooked up...(from the last dip you see there...)  but can clearly see a difference already....

How many miners do you have on that farm? I forgot that some people don't live in a NORMAL house. Just kidding. I guess if you have a farm and are going to add a lot more electrical devices you may as well get a fat electrical pipe right into the house. My house is only 10 years old, all the electrical wiring is new. It is just a single family ranch style home with 100 amp panel. I don't plan on going over that anytime soon, and of course I separate circuits for my washer/dryer and air conditioning. And please tell me, why do you mine at Eligius? Such an ugly site! That Wizkid and his pool.

soy
legendary
Activity: 1428
Merit: 1013
November 20, 2013, 05:31:09 PM
3 modules received today at the same time. However, I AM MISSING ONE SCREW AND SPACER. C'mon KNC! Does anyone know where I can find a suitable replacement?

Lowes for the screw.
sr. member
Activity: 327
Merit: 250
November 20, 2013, 05:26:05 PM
3 modules received today at the same time. However, I AM MISSING ONE SCREW AND SPACER. C'mon KNC! Does anyone know where I can find a suitable replacement?

There are plastic spacers + screws with the Arctic cooler. You can use those.

Thanks for the tip! I have yet to open the fan box. I'm still waiting for 2 more Arctic Coolers to arrive from Amazon this evening so I can mount 2 boards in the case, and then try to find the best place for a 5th board in my Saturn. Will post results later. Running .99 firmware and getting 280-285Gh/s with 2 modules and all ASIC cores enabled.
hero member
Activity: 635
Merit: 500
November 20, 2013, 05:24:54 PM
It was 0.99.

Now I went back to 0.98 cause this was the best for me.

So now waiting and watching putty...

What sticker do you have on your upgrade modules? Mine are 1.

Mine are 1 too, but they don't mean anything according to Bitcoinorama Wink

They don't, and as you well acknowledged those with numbers irrespective of sticker have seen all cores hashing as firmware fixed issues as, and when they arose, and were reported.

I have no problem with them. Both 2 runs at 100%.

So it's fine.
legendary
Activity: 1274
Merit: 1000
Personal text my ass....
November 20, 2013, 05:19:59 PM
anyone near Philly gets lucky and still gets their modules tonight

Scheduled Delivery:
    Wednesday, 11/20/2013, By End of Day



I live right next to Philly and all my deliveries were changed to tomorrow.

legendary
Activity: 1274
Merit: 1000
Personal text my ass....
November 20, 2013, 05:18:40 PM
Yeah, I really love what KNC has done and am eager to see what new beast they roll out. At the same time, it may come down to who can ship first..

While KNC has been working on their stuff, deliveries and all that there most likely have been other companies working on their stuff as well....miners hashing at 2TH or even more will most likely come from other companies then KNC. The problem is to find out which ones will be on the market first. Seriously, KNC's first top of the line rig was 580Gh/s. What could possibly be their top of the line 2nd gen model? I REALLY want to see an American company come out with something. I would definitely take the ride to check them out and pick up the goods, as well as a lot of other people would.
hero member
Activity: 812
Merit: 502
November 20, 2013, 05:15:35 PM
3 modules received today at the same time. However, I AM MISSING ONE SCREW AND SPACER. C'mon KNC! Does anyone know where I can find a suitable replacement?

There are plastic spacers + screws with the Arctic cooler. You can use those.
hero member
Activity: 532
Merit: 500
November 20, 2013, 05:11:46 PM
3 modules received today at the same time. However, I AM MISSING ONE SCREW AND SPACER. C'mon KNC! Does anyone know where I can find a suitable replacement?

That's unfortunate if that's the case. Screws are commonly available (I'll check the sizing tomo), and spacers are not really needed.
hero member
Activity: 532
Merit: 500
November 20, 2013, 05:08:58 PM
It was 0.99.

Now I went back to 0.98 cause this was the best for me.

So now waiting and watching putty...

What sticker do you have on your upgrade modules? Mine are 1.

Mine are 1 too, but they don't mean anything according to Bitcoinorama Wink

They don't, and as you well acknowledged those with numbers irrespective of sticker have seen all cores hashing as firmware fixed issues as, and when they arose, and were reported.
member
Activity: 70
Merit: 10
knc-shill-wannabe
November 20, 2013, 05:06:15 PM
KNC should delay production and shipment of this batch till January, in my opinion. I think it will be a noble thing for knc to do towards small miners who just get introduced to bitcoin with Erupters and such.

LOL. are you serious or just trolling?

So knc should delay because you forgot to use a bitcoin mining calculator before buying a USB miner?

 

I have a November order, but I am willing to forfeit some income for greater good.
sr. member
Activity: 327
Merit: 250
November 20, 2013, 04:54:46 PM
3 modules received today at the same time. However, I AM MISSING ONE SCREW AND SPACER. C'mon KNC! Does anyone know where I can find a suitable replacement?
member
Activity: 70
Merit: 10
knc-shill-wannabe
November 20, 2013, 04:37:20 PM
KNC should delay production and shipment of this batch till January, in my opinion. I think it will be a noble thing for knc to do towards small miners who just get introduced to bitcoin with Erupters and such.
sr. member
Activity: 462
Merit: 250
November 20, 2013, 04:16:37 PM


Competition is good for consumers, so I hope Hashfast and Cointerra don't both fail. Hashfast seems to be closer to shipping a product.

Both Hashfast and Cointerra look like they are extremely overpriced based on their estimated delivery dates.

this is nonsense..  this business is a horse race, so you do want them to fail unless you placed orders across the board
hero member
Activity: 561
Merit: 521
Trustless IceColdWallet
November 20, 2013, 04:07:34 PM
I have an question about the cowboys who had liquid cooling.

Whats your temp now?

Whats about the hw errors, does they decrease?

Have i missed the stats? If Yes sorry answering. Undecided
soy
legendary
Activity: 1428
Merit: 1013
November 20, 2013, 04:00:43 PM
It was 0.99.

Now I went back to 0.98 cause this was the best for me.

So now waiting and watching putty...

What sticker do you have on your upgrade modules? Mine are 1.

Mine are 1 too, but they don't mean anything according to Bitcoinorama Wink

The digit may not be consonant with performance above some minimal level perhaps.
legendary
Activity: 974
Merit: 1000
November 20, 2013, 03:59:38 PM
Jupiter November Shipping  Cheesy



hero member
Activity: 635
Merit: 500
November 20, 2013, 03:53:35 PM
It was 0.99.

Now I went back to 0.98 cause this was the best for me.

So now waiting and watching putty...

What sticker do you have on your upgrade modules? Mine are 1.

Mine are 1 too, but they don't mean anything according to Bitcoinorama Wink

Yep Smiley
hero member
Activity: 812
Merit: 502
November 20, 2013, 03:42:59 PM
It was 0.99.

Now I went back to 0.98 cause this was the best for me.

So now waiting and watching putty...

What sticker do you have on your upgrade modules? Mine are 1.

Mine are 1 too, but they don't mean anything according to Bitcoinorama Wink
hero member
Activity: 742
Merit: 500
November 20, 2013, 03:35:16 PM
Is it public data how many Jupiters will be shipped in KnC November batch?

Bitcoinrama, do you know that?

I think the technical term is "lots and lots".

Most likely the final K.O. punch toward the other companies that are delayed.

I hope so.  HashFail and FailTerra can get bent.

Competition is good for consumers, so I hope Hashfast and Cointerra don't both fail. Hashfast seems to be closer to shipping a product.

Both Hashfast and Cointerra look like they are extremely overpriced based on their estimated delivery dates.
full member
Activity: 238
Merit: 100
Bitcoin For All
November 20, 2013, 03:31:05 PM
Is it public data how many Jupiters will be shipped in KnC November batch?

Bitcoinrama, do you know that?

I forgot the date.  Roll Eyes Shocked


On the whole -- or so it seems -- my upgrades would rather be in Philadelphia -- so no pictures from here. Maybe Saturday.
Jump to: