Author

Topic: Swedish ASIC miner company kncminer.com - page 1286. (Read 3050068 times)

full member
Activity: 164
Merit: 100
October 18, 2013, 04:21:04 AM
As this is a bit of a fuck-up and no one has mentioned it here yet, I'm going to xpost it:
http://forum.kncminer.com/forum/main-category/hardware/8377-it-should-be-removed-before-the-cooler-is-installed-this-is-a-instalation-quality-check-failure

Hopefully it was a limited incident, but worth adding to your "before powering up for the first time" checklist.
LOL that's crap
RHA
sr. member
Activity: 392
Merit: 250
October 18, 2013, 04:21:00 AM

KnC has officially published the sources: https://www.kncminer.com/news/news-53
hero member
Activity: 798
Merit: 1000
October 18, 2013, 04:15:13 AM
As this is a bit of a fuck-up and no one has mentioned it here yet, I'm going to xpost it:
http://forum.kncminer.com/forum/main-category/hardware/8377-it-should-be-removed-before-the-cooler-is-installed-this-is-a-instalation-quality-check-failure

Hopefully it was a limited incident, but worth adding to your "before powering up for the first time" checklist.
sr. member
Activity: 407
Merit: 250
legendary
Activity: 1260
Merit: 1008
October 18, 2013, 02:05:42 AM

finally we've taken the right route! Thanks Luke-jr.

OT: I've never heard of abitcoin.org, new forum? is it similar to btctalk.org?
member
Activity: 109
Merit: 10
October 18, 2013, 12:25:53 AM

I run 1 Jupiter with 512 ghs (1 jup=1worker)

never know about result on 1 Ths, on the other speed much more erorrs. Best choise is 512


same, 512 / Jupiter

Thanks. May I ask what your AVG rate is?


I have another question: in the current Difficult,  which output by 1 jupiter for 24h/BTC?   Which pool?

Thks
sr. member
Activity: 336
Merit: 250
October 17, 2013, 11:38:51 PM
Well, here are my stats for a saturn delivered today, after about 8 1/2 hrs. of mining

miner_knc   229.68 GH/s   1332864 (99.70%)   1792 / 8064 / 2176


temps look great at 46.5 celsius and 41c


currently on .95......like the low errors, scared to update firmware but also want the faster hashing rate described by other Saturn owners like phoenix1969, he has 3 Saturns churning at about 275GH/s ea.

Any Saturn owners with ideas/suggestions???
full member
Activity: 164
Merit: 100
October 17, 2013, 10:30:16 PM
0.96 feedback
http://forum.kncminer.com/forum/main-category/main-forum/8227-96-firmware-update-feedback/page2

Quote
warning, read my post in the hardware section about asic_test. Do not use it manually. You can lock your cores with it. It can also unlock seemingly dead cores on a firmware upgrade automatically. Just don't mess with it yourself.

it has been Confirmed by 3 others
soy
legendary
Activity: 1428
Merit: 1013
October 17, 2013, 10:20:53 PM
Wow, does DHL draw a vacuum.  They won't deliver to a US Post Office.  If I want to pick it up at a DHL office they only offer Atlanta, and I'm halfway between Atlanta and Columbus and a good deal west.  So, that's out.  I gave them my home address but my property is always gates closed and my home is 2½ acres distant from the drive gate.  If I leave the gate open, a neighbor's dog kills my chickens.  These are free ranging chickens and don't get cooped up all day unless I have to spend the night away.  I asked for a time to expect delivery and was told anytime between 8AM and 8PM.  I'd say call my cell but my cell doesn't get any reception here.  If the weather's nice I'll be out in the yard and won't hear the home phone.  Had a problem with DHL once before.  They tried to deliver a radio.  It had arrived at the Columbus office.  Found a note saying they had been here 3 times and were returning it.  They lied.  Driver just didn't want to make the trip again.  No fence in those days.  No excuse, just lazy, lying DHL driver back then.
Are you saying that the root problem is the neighbor's dog?

The problem is that DHL won't deliver to my US Post Office Box.  I don't take deliveries at my home unless there is absolutely no alternative.  When I gave in and said okay and said deliver it to my home I couldn't get a reasonable window on when to expect delivery; I need to be here available from early morning to 8PM tomorrow night and I had tentative plans to be somewhere else.  Add to that the annoyance that the gate is 500' away and stays closed except when I'm passing thru it...it's just not a good delivery arrangement.  Some upgrade, I wasn't consulted except for the original shipping spec and I said UPS and for this reason.  So, the chickens will be cooped up until after delivery and the gate will be left open.  Foxes too but after asking a kid next door to cool it flying by the chicken coop in his ATV, my chickens started getting killed.  I thought it was the fox I was seeing on my trailcams until I heard a commotion right out front and there was the neighbor's beagle laying waste to my flock.  I put up the fence.  Over 3 acres fenced.  Haven't lost any more chickens.
donator
Activity: 2352
Merit: 1060
between a rock and a block!
October 17, 2013, 09:56:49 PM
Wow, does DHL draw a vacuum.  They won't deliver to a US Post Office.  If I want to pick it up at a DHL office they only offer Atlanta, and I'm halfway between Atlanta and Columbus and a good deal west.  So, that's out.  I gave them my home address but my property is always gates closed and my home is 2½ acres distant from the drive gate.  If I leave the gate open, a neighbor's dog kills my chickens.  These are free ranging chickens and don't get cooped up all day unless I have to spend the night away.  I asked for a time to expect delivery and was told anytime between 8AM and 8PM.  I'd say call my cell but my cell doesn't get any reception here.  If the weather's nice I'll be out in the yard and won't hear the home phone.  Had a problem with DHL once before.  They tried to deliver a radio.  It had arrived at the Columbus office.  Found a note saying they had been here 3 times and were returning it.  They lied.  Driver just didn't want to make the trip again.  No fence in those days.  No excuse, just lazy, lying DHL driver back then.
Are you saying that the root problem is the neighbor's dog?
donator
Activity: 2352
Merit: 1060
between a rock and a block!
October 17, 2013, 09:54:52 PM
Did they change from UTC to EDT on the fly?

Thursday, October 17, 2013    Location    Time    
9    Customs status updated    CINCINNATI HUB, OH - USA    18:41    
 
8    Departed Facility in BRUSSELS - BELGIUM    BRUSSELS - BELGIUM    21:39    
 
7    Processed at BRUSSELS - BELGIUM    BRUSSELS - BELGIUM    11:15    
 
6    Arrived at Sort Facility BRUSSELS - BELGIUM    BRUSSELS - BELGIUM    01:44    
 

Local time. Btw, that's automated clearance, before it even lands in OH.  Next update will be between midnight and 1 aM when it actually arrives in OH.
legendary
Activity: 938
Merit: 1000
LIR DEV
October 17, 2013, 09:54:17 PM
3 saturns, 825
member
Activity: 109
Merit: 10
October 17, 2013, 09:28:55 PM

I run 1 Jupiter with 512 ghs (1 jup=1worker)

never know about result on 1 Ths, on the other speed much more erorrs. Best choise is 512


same, 512 / Jupiter

Thanks. May I ask what your AVG rate is?

530-580 av/~ 60hours  / extrem hi is 650 Smiley on guild

on eligius....1 time/day stable 1-2 hours offline.   No problem guild with
full member
Activity: 164
Merit: 100
October 17, 2013, 09:27:05 PM

I run 1 Jupiter with 512 ghs (1 jup=1worker)

never know about result on 1 Ths, on the other speed much more erorrs. Best choise is 512


same, 512 / Jupiter

Thanks. May I ask what your AVG rate is?
they have avg of 550 / 553 / 555 ghs on cgminer
member
Activity: 84
Merit: 10
October 17, 2013, 09:19:19 PM
For the hosted, what are your hashrates?
full member
Activity: 164
Merit: 100
October 17, 2013, 09:14:43 PM
For everyone/anyone mining on BTCGuild with their KnCMiner gear, what difficulty are you guys running on your Jupiters? What about Jupes that run under 500GH?

I believer Eligius still does not allow dif change, right?

 I setup 512 ghs - as a result is 99.94% (accepted shares) 2 days long. Other diff make much more errors. Not now about 1 Ths only Smiley

So you're running 512 with 1TH/s?

What about people who are running 1 Jupiter? Are you guys set at 256 or 512?

I run 1 Jupiter with 512 ghs (1 jup=1worker)

never know about result on 1 Ths, on the other speed much more erorrs. Best choise is 512
same, 512 / Jupiter
full member
Activity: 164
Merit: 100
October 17, 2013, 09:13:40 PM
Do you guys think the difficulty is going to keep on increasing at 50% increments? If not, then what percent increments do you think?


Nobody knows for sure but I think 10 PH/s if a good estimate of 2013 pre-orders.   If everyone delivers by Jan we can expect difficulty to quadruple between now and then.  Honestly it doesn't really matter if there is a "slow week" if the following week is some 800 TH/s rollout.

Plan on 10 PH/s in January and adjust your coinflow accordingly.



i might give him your post for more details
https://bitcointalksearch.org/topic/estimate-of-asic-pre-orders-13-to-15-phs-diff-18b-to-21b-by-end-of-2013-283820

http://bitcoin.sipa.be/speed-lin-10k.png
http://bitcoin.sipa.be/speed-lin-2k.png
member
Activity: 109
Merit: 10
October 17, 2013, 09:10:01 PM
For everyone/anyone mining on BTCGuild with their KnCMiner gear, what difficulty are you guys running on your Jupiters? What about Jupes that run under 500GH?

I believer Eligius still does not allow dif change, right?

 I setup 512 ghs - as a result is 99.94% (accepted shares) 2 days long. Other diff make much more errors. Not now about 1 Ths only Smiley

So you're running 512 with 1TH/s?

What about people who are running 1 Jupiter? Are you guys set at 256 or 512?

I run 1 Jupiter with 512 ghs (1 jup=1worker)

never know about result on 1 Ths, on the other speed much more erorrs. Best choise is 512
hero member
Activity: 574
Merit: 500
Mining for the hell of it.
October 17, 2013, 09:05:42 PM
Mark day 2 for "In Process"

How can that be if they are working in batches? Surely day 2 should all be done and shipped now?
Your day 2 and my mid July in the same batch? Both in process? Pfft.

Not what i ment as day 2 order.
I mean that its been 2 days that it has said in process.  Tongue
Jump to: