Swedish ASIC miner company kncminer.com - page 1492.

docjunior

member

Activity: 62

Merit: 10

Quote from: Bitcoinorama on October 02, 2013, 05:21:29 AM

Yo! Looks like orders are actually going out today.

https://www.youtube.com/watch?v=bDdcZtdBL2M

I would also like to be leaving here today! Wink

Haha, with that kind of speed on the packaging line, they have to shut down the pick-n-place machines to avoid a pile up! :-))

(Bitcoinorama - was that you on the vid? :-))

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: Bitcoinorama on October 02, 2013, 05:21:29 AM

Yo! Looks like orders are actually going out today.

https://www.youtube.com/watch?v=bDdcZtdBL2M

I would also like to be leaving here today! Wink

ooooooooooooooooooooooooooooooooooooooooooooooohhhhhhhh!!!! YES!!!

The Avenger

hero member

Activity: 798

Merit: 1000

Quote from: semaster on October 02, 2013, 05:39:53 AM

Quote from: The Avenger on October 02, 2013, 05:27:29 AM

Quote from: trepex on October 02, 2013, 04:49:37 AM

and they can't promise that a backup mining pool will be in the first revision of this software. Huh

I wanted to SSH so I could add a couple of failover pools. This was the only thing I wanted to do the day I get my miner.

THIS IS NUMBER 1 SOFTWARE PRIORITY TO SORT KNC.

I don't want my miner sitting idle because one pool is under ddos Angry

I called someone an amateur the other day for not having a failover pool and KNC are going to make us all amateurs if we can't set up multiple failover pools Angry

use p2pool - forget about pool ddos

Can you explain why this is different to a pool like btcguild in terms of ddos?

The Avenger

hero member

Activity: 798

Merit: 1000

Quote from: erk on October 02, 2013, 05:38:11 AM

Seems BFL are responding with a Monarch prototype.

BFL are never responding after KNC ship Grin

plasmoske

sr. member

Activity: 308

Merit: 251

The realist

By the way... not enough sticky tape on that box Tongue

Needs tape on all the edges, bottom and top.

Otherwise, delivery guy chucks it into the van, the whole box may come flying out because only one tape is holding each side Tongue

semaster

sr. member

Activity: 395

Merit: 250

Quote from: The Avenger on October 02, 2013, 05:27:29 AM

Quote from: trepex on October 02, 2013, 04:49:37 AM

and they can't promise that a backup mining pool will be in the first revision of this software. Huh

I wanted to SSH so I could add a couple of failover pools. This was the only thing I wanted to do the day I get my miner.

THIS IS NUMBER 1 SOFTWARE PRIORITY TO SORT KNC.

I don't want my miner sitting idle because one pool is under ddos Angry

I called someone an amateur the other day for not having a failover pool and KNC are going to make us all amateurs if we can't set up multiple failover pools Angry

use p2pool - forget about pool ddos

erk

hero member

Activity: 826

Merit: 500

Seems BFL are responding with a Monarch prototype.

Gyrsur

legendary

Activity: 2856

Merit: 1520

Bitcoin Legal Tender Countries: 2 of 206

Quote from: Bitcoinorama on October 02, 2013, 05:21:29 AM

Yo! Looks like orders are actually going out today.

https://www.youtube.com/watch?v=bDdcZtdBL2M

I would also like to be leaving here today! Wink

Is this Marcus? How much staff do they have?

EDIT: my private estimation is 50 - 75 units per day. 25 - 37.5 Thash per day.

The Avenger

hero member

Activity: 798

Merit: 1000

Quote from: pitchbend on October 02, 2013, 05:31:51 AM

BTW I hope they hire someone with more packing skills than the guy on oramas video, otherwise we are screwed Cheesy

That was probably orama doing a selfie. Talks a good game, but can't fold the flaps on a box! Wink

I guess him and that box are on their way to Atlanta later today.

Rampion

legendary

Activity: 1148

Merit: 1018

Quote from: Bitcoinorama on October 02, 2013, 05:21:29 AM

Yo! Looks like orders are actually going out today.

https://www.youtube.com/watch?v=bDdcZtdBL2M

I would also like to be leaving here today! Wink

Did you finally get your free Jupiter?

pitchbend

sr. member

Activity: 242

Merit: 250

It's not exactly wishful thinking or day dreaming since Sam said on the launch video "shipping today", maybe it's naive to believe him but people are expecting their units today based on what he explicitly said.

BTW I hope they hire someone with more packing skills than the guy on oramas video, otherwise we are screwed Cheesy

Quote from: Rampion on October 02, 2013, 05:18:00 AM

Quote from: Xialla on October 02, 2013, 05:14:03 AM

Quote from: pitchbend on October 02, 2013, 05:10:55 AM

We will contact you per email as soon as your order is ready with the details for pickup.

Quote from: trepex on October 02, 2013, 04:49:37 AM

Starting the production lines did not go as smoothly as they did expect.

meeeh, I don't think that they will start shipping todat.(

It doesn't look like they will ship this week at all. AFAIK they are still working on debugging (+25% hardware error, right?), webinterface, etc. - as soon as they have gone through these processes they should implement everything on hundreds (if not thousands) of machines, pack them up, etc. People in here daydream and think that you can take the very first version of a bleeding edge piece of hardware directly from the production line, pack it up and send it up to thousands of customers in just one day, without any kind of testing/debugging. Wishful thinking and day dreaming all over this forum...

plasmoske

sr. member

Activity: 308

Merit: 251

The realist

Quote from: notung on October 02, 2013, 05:28:51 AM

Quote from: BenTuras on October 02, 2013, 05:23:06 AM

Quote from: Rampion on October 02, 2013, 05:18:00 AM

...they should implement everything on hundreds (if not thousands) of machines...

I am sure every customer would be more than ok to start with doing a software update of the miner right after receiving it. So there is no need to wait with shipping because of that.

Mining software should be already up to date as it is in the beaglebone...

It's cgminer with a custom driver... and has about 10-25% hw errors

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: Bitcoinorama on October 02, 2013, 05:21:29 AM

Yo! Looks like orders are actually going out today.

https://www.youtube.com/watch?v=bDdcZtdBL2M

I would also like to be leaving here today! Wink

man I hope they get up to speed and ship stuff faster then that guy.I swear I think they could make a miner faster!

(hopefully was not 'swedish' speed and only demo)

I notice they turned the camera off before you "hot footed' out the door with the box bitcoinorama?

Searing

The Avenger

hero member

Activity: 798

Merit: 1000

Quote from: Bitcoinorama on October 02, 2013, 05:21:29 AM

Yo! Looks like orders are actually going out today.

https://www.youtube.com/watch?v=bDdcZtdBL2M

I would also like to be leaving here today! Wink

Man, I hope there is something inside that box holding those heavy heatsinks in place or there will be a bad rattling sound when those boxes arrive...

Xialla

legendary

Activity: 1036

Merit: 1001

/dev/null

Quote from: Rampion on October 02, 2013, 05:18:00 AM

Quote from: Xialla on October 02, 2013, 05:14:03 AM

Quote from: pitchbend on October 02, 2013, 05:10:55 AM

We will contact you per email as soon as your order is ready with the details for pickup.

Quote from: trepex on October 02, 2013, 04:49:37 AM

Starting the production lines did not go as smoothly as they did expect.

meeeh, I don't think that they will start shipping todat.(

People in here daydream and think that you can take the very first version of a bleeding edge piece of hardware directly from the production line, pack it up and send it up to thousands of customers in just one day, without any kind of testing/debugging. Wishful thinking and day dreaming all over this forum...

meeh, don't scare me, this is my log:

2/10 - no info about shipping, no tracking number (taking another week of homeoffice to receive miner by UPS at home)
1/10 - my order is "in progress"status
30/9 - Jupiter launch: We start shipping today (last statement in video)
27/9 - mail from KNC: "We can confirm that your order is still expected to ship towards the end of September"

plasmoske

sr. member

Activity: 308

Merit: 251

The realist

2 piece of foam (on the side of the rig)?

Hopefully that's enough to take the damage/UPS abuse Roll Eyes

Wonder if there's any foam or air bags inside heh

notung

member

Activity: 67

Merit: 10

Quote from: BenTuras on October 02, 2013, 05:23:06 AM

Quote from: Rampion on October 02, 2013, 05:18:00 AM

...they should implement everything on hundreds (if not thousands) of machines...

I am sure every customer would be more than ok to start with doing a software update of the miner right after receiving it. So there is no need to wait with shipping because of that.

Mining software should be already up to date as it is in the beaglebone...

The Avenger

hero member

Activity: 798

Merit: 1000

Quote from: trepex on October 02, 2013, 04:49:37 AM

and they can't promise that a backup mining pool will be in the first revision of this software. Huh

I wanted to SSH so I could add a couple of failover pools. This was the only thing I wanted to do the day I get my miner.

THIS IS NUMBER 1 SOFTWARE PRIORITY TO SORT KNC.

I don't want my miner sitting idle because one pool is under ddos Angry

I called someone an amateur the other day for not having a failover pool and KNC are going to make us all amateurs if we can't set up multiple failover pools Angry

Puppet

legendary

Activity: 980

Merit: 1040

Quote from: Bitcoinorama on October 02, 2013, 05:21:29 AM

Yo! Looks like orders are actually going out today.

https://www.youtube.com/watch?v=bDdcZtdBL2M

I would also like to be leaving here today! Wink

"...and there's a worthwhile reason for pulling an allnighter. Wink

"
Curious about that

I will say that the guy in that video packaging that miner hasnt packaged a lot yet. Im sure he will get better at it in the coming week

plasmoske

sr. member

Activity: 308

Merit: 251

The realist

Heh I knew it had to do something with the web interface/pool. As there were zero demo of it.

Kinda sucky. They've got the hardware but now they need to work on the software side (web interface, knc pool page, cg miner driver, knc pool software etc).

Hopefully they don't take too long..

Topic: Swedish ASIC miner company kncminer.com - page 1492. (Read 3050071 times)