So this pic would have to be all 5 boxes hooked up and running then, right?
Yes correct !
Topic: Swedish ASIC miner company kncminer.com - page 371. (Read 3050076 times)
Yes correct !
For some reason the error "Failed to setwork" is suddenly disappeared... and now it all looks normal:
So this pic would have to be all 5 boxes hooked up and running then, right?
I should review your previous posts took longer than saying,
Yes, you really should have.
All is working and running now for nearly 4 hours un interrupted: 15 minutes average is 3.3 Ths. Pool is telling the same.
Considering that it can only become better forward, it's OK.
Considering that it can only become better forward, it's OK.
I did, and I was still confused...sue me.
666GH/s per Cube = 3.3TH/s total at 475Mhz
At 500Mhz the Titan might theoretically hash at 3.5TH/s
With just one PCI-E connector I somehow feel 500Mhz is the maximum.
It was probably done on purpose, so if you want to get higher clocks you need to solder extra wires = invalidate warranty.
I should review your previous posts took longer than saying,
Yes, you really should have.
All is working and running now for nearly 4 hours un interrupted: 15 minutes average is 3.3 Ths. Pool is telling the same.
Considering that it can only become better forward, it's OK.
Considering that it can only become better forward, it's OK.
I did, and I was still confused...sue me.
5 cubes with two d.o.a.
Does that mean if you had all 5 cubes operational we'd be looking at closer to 5.5 THs? Perhaps
beyond three we'll have to split them onto another controller or different PSU, but this seems like
great news. That turns a 3 THs order into 10Ths+ total upon delivery of second set?!
And that's assuming no overclocking? With overclocking of each cube might even get 11-12 THs?!
Nevermind...though 6THs with room for overclocking ain't bad. (3THs x 2units once delivered)
OK... one picture with the 3 boxes:
You can see the display (bleu thing on the bottom of the Controller board)
You can see the display (bleu thing on the bottom of the Controller board)
Still those damn short cables...
Elenelen, can you feel the heat coming from the cubes. Like from a 2000W space heater?
I would imagine 15 cubes (3 Neptunes) in a room will make it a sauna, right?
I would imagine 15 cubes (3 Neptunes) in a room will make it a sauna, right?
Yes, of course 2000W in Summer isn't something you want to have in a living-room.
It's clear: this year is the last we Mine ourselves (I have still a Titan order as well...).
Power draw looks good.
I have this at the wall (2 PSU's): 790 + 1175 = 1965 W
Elenelen, can you feel the heat coming from the cubes. Like from a 2000W space heater?
I would imagine 15 cubes (3 Neptunes) in a room will make it a sauna, right?
I would imagine 15 cubes (3 Neptunes) in a room will make it a sauna, right?
Photo is simple
Only 2 seconds
Take and post it
Only 2 seconds
Take and post it
Not on this board! Have you actually tried it? You have to upload it to an image-host site, edit it, link it...
It's a major pain in the ass!
Yes... if that is the way... I passsss.
Sorry
Why you guys keep calling Elene Len a GUY. If not stated otherwise, she is a female, and a lucky first Neptune owner
.I wonder where additional 500-600W go if ASICS are only 1440? Seems like an awful lot of power to drive fans and/or controller.
I think the 2100W was stated from the wall so you have the PSU's in between.
For some reason the error "Failed to setwork" is suddenly disappeared... and now it all looks normal:
All is working and running now for nearly 4 hours un interrupted: 15 minutes average is 3.3 Ths. Pool is telling the same.
Considering that it can only become better forward, it's OK.
Considering that it can only become better forward, it's OK.
I now have 5 boxes running, but 3 boxes have 2 DC/DC's not working 
Why you guys keep calling Elene Len a GUY. If not stated otherwise, she is a female, and a lucky first Neptune owner .
.Oops... caught ...
Photo is simple
Only 2 seconds
Take and post it
Only 2 seconds
Take and post it
Not on this board! Have you actually tried it? You have to upload it to an image-host site, edit it, link it...
It's a major pain in the ass!
Yes... if that is the way... I passsss.
Sorry
Why you guys keep calling Elene Len a GUY. If not stated otherwise, she is a female, and a lucky first Neptune owner
.I wonder where additional 500-600W go if ASICS are only 1440? Seems like an awful lot of power to drive fans and/or controller.
OK... one picture with the 3 boxes:
You can see the display (bleu thing on the bottom of the Controller board)
You can see the display (bleu thing on the bottom of the Controller board)
Did the 5 Neptune boxes came in one same package thru UPS ?
Yes: a nice cardboard box, with 6 compartments. But still some heavy thing did press the top during transport, and resulted in some scratches on two Neptune-boxes (even bended the aluminum some what). But much better packed than the previous Jupiters !
These guys never cease to amaze me with their ghetto-designed products. They are such a damned joke.
Seriously, for $12k they couldn't do a better designed enclosure? Damnable, contemptible assholes.
Lol bro u mad ? jk
lol
OK... one picture with the 3 boxes:
You can see the display (bleu thing on the bottom of the Controller board)
You can see the display (bleu thing on the bottom of the Controller board)
Did the 5 Neptune boxes came in one same package thru UPS ?
GCminer version 4.4.0
And it's 666 Ghs for one chip (you need many more Jup-chips for the same).
And it's 666 Ghs for one chip (you need many more Jup-chips for the same).
LOL!
Jump to: