[SYNX] Syndicate | Business Management Platform | NEW BETA v1.0.1.7 RELEASED! | - page 154.

BBoBB

sr. member

Activity: 346

Merit: 251

Do it right or don't do it at all.

Quote from: SyndicateLabs on June 17, 2016, 03:32:02 PM

Quote from: anticlimax on June 17, 2016, 02:14:12 PM

Very active dev. Looking forward to your progress. Fingers crossed you stick around. Kiss

Thank you! A few things I'm working on at the moment:

A potential visual balance bug brought to my attention by BBoBB
Compiling the newest version of Qt 5.7 (released 6/16/16)
Creating a slack channel page in the wallet
Employee registration page
Login panel for Admins / Employee's

Where do we send our CVs? Grin

SyndicateLabs

full member

Activity: 896

Merit: 100

PredX - AI-Powered Prediction Market

Quote from: anticlimax on June 17, 2016, 02:14:12 PM

Very active dev. Looking forward to your progress. Fingers crossed you stick around. Kiss

Thank you! A few things I'm working on at the moment:

A potential visual balance bug brought to my attention by BBoBB
Compiling the newest version of Qt 5.7 (released 6/16/16)
Creating a slack channel page in the wallet
Employee registration page
Login panel for Admins / Employee's

anticlimax

legendary

Activity: 1050

Merit: 1000

Very active dev. Looking forward to your progress. Fingers crossed you stick around. Kiss

SyndicateLabs

full member

Activity: 896

Merit: 100

PredX - AI-Powered Prediction Market

Block reward halved again!

Were at 250 SYNX for the next 5000 blocks!

SyndicateLabs

full member

Activity: 896

Merit: 100

PredX - AI-Powered Prediction Market

Quote from: Lafu on June 14, 2016, 02:40:15 PM

Quote from: GTX980Power on June 14, 2016, 02:34:54 PM

Quote from: Lafu on June 14, 2016, 02:29:39 PM

Darksend

?? Wtf is this ? Huh

Whats wrong with darksend?

Tell me about this i dont know

Darksend is an original feature from Dash, It is used to mix & anonymize an amount of coins you choose.

SyndicateLabs

full member

Activity: 896

Merit: 100

PredX - AI-Powered Prediction Market

Quote from: BBoBB on June 16, 2016, 01:55:52 PM

Quote from: SyndicateLabs on June 16, 2016, 01:23:05 PM

Quote from: BBoBB on June 16, 2016, 01:04:38 PM

Hi @Dev

I setup 2 nodes... one on Linux and one on Windows.
Ran them for a while with Masternode off (to see stakes only)
Ran the Linux as Masternode this morning...
All seems ok except for one thing....
I don not seem to figure how the Totals add up..... something seems off between available, stake and total
I'm not complaining just like to see if anyone else has the same issue... if it is an issue at all so we work to resolve it...
i can kick 6 isolated nodes to support the network but i'm confused with the figures... so excuse my ignorance please and bare with me to explain if you may

how would :
- a wallet that had 12K (2 deposits to two different addresses); taking into consideration the PoS rate, show +20K (in total and available) [pre masternode setup]

- the same wallet shows 16K post Master node setup

(the balances referenced are truncated down)

your feedback is highly appreciated...

Thank you for bringing this to my attention! If its an issue or not, it needs to be resolved immediately.

I have a few questions for you:

1. Are you running these 2 single masternodes from 2 separate wallets?

2. Is it possible you might have accidentally sent the 5k from one wallet to the other?

Personally, I find the easiest way to run multiple masternodes is to have 1 controller wallet, and 2 seperate Syndicated daemons running..

If all the funds started in the controller wallet, its designed to have the funds kept and staked from the controller wallet.

The 2 Syndicated daemons do not receive the funds to run the masternodes, the funds essentially get sent to yourself by sending it from your own prepayment address to your own masternode address in the controller wallet.

Thank you for the prompt response.
- it's 1 wallet
- transactions done on it are 2 in (with the mined coins) 2 payment to self and the "mined"
- The daemons are swapped on my virtualization setup so i can kick Linux or Windows (one at a time)

Being the dev and for us not to waste alot of time fixing the issue, PM me and i'll give you my wallet.dat file so u see what's what

once your solution is implemented... i'll setup a new wallet and you send me my coins back to my fresh setup.. that or i can pass you the addresses and u take a look on the block chain.. your call..

let me know.
Cheers

Please hold onto your wallet.dat! Keep it safe & backed up at all times!

yes I would love to see the address'! I'll start by looking into those, all 4 of them please!

BBoBB

sr. member

Activity: 346

Merit: 251

Do it right or don't do it at all.

Quote from: SyndicateLabs on June 16, 2016, 01:53:37 PM

Quote from: werwortmann on June 16, 2016, 01:45:52 PM

I am also having weird things happen with the stake balance.
I upgraded to the 1.001 wallet earlier today.
My stake balance would slowly go up, but I didn't actually receive any mined transactions.
So then I downgraded to the v1 wallet, my stake balance dropped to 10% of what is was a minute before and 3 mined transactions immediately came through.
But the net effect was still a loss of coins.
So then I upgraded back to v1.001 and my stake balance jumped back to 90% of what it was originally.
So there is definitely something weird going on with staking and the new wallet

The staking is not ran by coin age & min stake time like every other coin, staking is ran from the block count & time. The min staking age is set to 3 hours & 180 blocks. Every 180 blocks, you're eligible to start staking until you find a block, then it starts over.

The new wallet didnt have any changes that would affect staking, it was simply a visual bug in the my masternodes tab.

I stopped working on the ANN thread & I've now began checking, checking, & double checking the code.

At this point I'm suspecting the lack of masternodes is the culprit, staking is not possible without active & eligible masternodes so until we have a few more stable ones online, the stake blocks can be more reliably split between the masternodes & the stakers.

I roledback my Vbox to the previous version and i can confirm the version change is not the cause of this from what i can deduct here..

BBoBB

sr. member

Activity: 346

Merit: 251

Do it right or don't do it at all.

Quote from: SyndicateLabs on June 16, 2016, 01:23:05 PM

Quote from: BBoBB on June 16, 2016, 01:04:38 PM

Hi @Dev

I setup 2 nodes... one on Linux and one on Windows.
Ran them for a while with Masternode off (to see stakes only)
Ran the Linux as Masternode this morning...
All seems ok except for one thing....
I don not seem to figure how the Totals add up..... something seems off between available, stake and total
I'm not complaining just like to see if anyone else has the same issue... if it is an issue at all so we work to resolve it...
i can kick 6 isolated nodes to support the network but i'm confused with the figures... so excuse my ignorance please and bare with me to explain if you may

how would :
- a wallet that had 12K (2 deposits to two different addresses); taking into consideration the PoS rate, show +20K (in total and available) [pre masternode setup]

- the same wallet shows 16K post Master node setup

(the balances referenced are truncated down)

your feedback is highly appreciated...

Thank you for bringing this to my attention! If its an issue or not, it needs to be resolved immediately.

I have a few questions for you:

1. Are you running these 2 single masternodes from 2 separate wallets?

2. Is it possible you might have accidentally sent the 5k from one wallet to the other?

Personally, I find the easiest way to run multiple masternodes is to have 1 controller wallet, and 2 seperate Syndicated daemons running..

If all the funds started in the controller wallet, its designed to have the funds kept and staked from the controller wallet.

The 2 Syndicated daemons do not receive the funds to run the masternodes, the funds essentially get sent to yourself by sending it from your own prepayment address to your own masternode address in the controller wallet.

Thank you for the prompt response.
- it's 1 wallet
- transactions done on it are 2 in (with the mined coins) 2 payment to self and the "mined"
- The daemons are swapped on my virtualization setup so i can kick Linux or Windows (one at a time)

Being the dev and for us not to waste alot of time fixing the issue, PM me and i'll give you my wallet.dat file so u see what's what

once your solution is implemented... i'll setup a new wallet and you send me my coins back to my fresh setup.. that or i can pass you the addresses and u take a look on the block chain.. your call..

let me know.
Cheers

SyndicateLabs

full member

Activity: 896

Merit: 100

PredX - AI-Powered Prediction Market

Quote from: werwortmann on June 16, 2016, 01:45:52 PM

I am also having weird things happen with the stake balance.
I upgraded to the 1.001 wallet earlier today.
My stake balance would slowly go up, but I didn't actually receive any mined transactions.
So then I downgraded to the v1 wallet, my stake balance dropped to 10% of what is was a minute before and 3 mined transactions immediately came through.
But the net effect was still a loss of coins.
So then I upgraded back to v1.001 and my stake balance jumped back to 90% of what it was originally.
So there is definitely something weird going on with staking and the new wallet

The staking is not ran by coin age & min stake time like every other coin, staking is ran from the block count & time. The min staking age is set to 3 hours & 180 blocks. Every 180 blocks, you're eligible to start staking until you find a block, then it starts over.

The new wallet didnt have any changes that would affect staking, it was simply a visual bug in the my masternodes tab.

I stopped working on the ANN thread & I've now began checking, checking, & double checking the code.

At this point I'm suspecting the lack of masternodes is the culprit, staking is not possible without active & eligible masternodes so until we have a few more stable ones online, the stake blocks can be more reliably split between the masternodes & the stakers.

werwortmann

member

Activity: 80

Merit: 10

I am also having weird things happen with the stake balance.
I upgraded to the 1.001 wallet earlier today.
My stake balance would slowly go up, but I didn't actually receive any mined transactions.
So then I downgraded to the v1 wallet, my stake balance dropped to 10% of what is was a minute before and 3 mined transactions immediately came through.
But the net effect was still a loss of coins.
So then I upgraded back to v1.001 and my stake balance jumped back to 90% of what it was originally.
So there is definitely something weird going on with staking and the new wallet

SyndicateLabs

full member

Activity: 896

Merit: 100

PredX - AI-Powered Prediction Market

Quote from: BBoBB on June 16, 2016, 01:04:38 PM

Hi @Dev

I setup 2 nodes... one on Linux and one on Windows.
Ran them for a while with Masternode off (to see stakes only)
Ran the Linux as Masternode this morning...
All seems ok except for one thing....
I don not seem to figure how the Totals add up..... something seems off between available, stake and total
I'm not complaining just like to see if anyone else has the same issue... if it is an issue at all so we work to resolve it...
i can kick 6 isolated nodes to support the network but i'm confused with the figures... so excuse my ignorance please and bare with me to explain if you may

how would :
- a wallet that had 12K (2 deposits to two different addresses); taking into consideration the PoS rate, show +20K (in total and available) [pre masternode setup]

- the same wallet shows 16K post Master node setup

(the balances referenced are truncated down)

your feedback is highly appreciated...

Thank you for bringing this to my attention! If its an issue or not, it needs to be resolved immediately.

I have a few questions for you:

1. Are you running these 2 single masternodes from 2 separate wallets?

2. Is it possible you might have accidentally sent the 5k from one wallet to the other?

Personally, I find the easiest way to run multiple masternodes is to have 1 controller wallet, and 2 seperate Syndicated daemons running..

If all the funds started in the controller wallet, its designed to have the funds kept and staked from the controller wallet.

The 2 Syndicated daemons do not receive the funds to run the masternodes, the funds essentially get sent to yourself by sending it from your own prepayment address to your own masternode address in the controller wallet.

BBoBB

sr. member

Activity: 346

Merit: 251

Do it right or don't do it at all.

Hi @Dev

I setup 2 nodes... one on Linux and one on Windows.
Ran them for a while with Masternode off (to see stakes only)
Ran the Linux as Masternode this morning...
All seems ok except for one thing....
I don not seem to figure how the Totals add up..... something seems off between available, stake and total
I'm not complaining just like to see if anyone else has the same issue... if it is an issue at all so we work to resolve it...
i can kick 6 isolated nodes to support the network but i'm confused with the figures... so excuse my ignorance please and bare with me to explain if you may

how would :
- a wallet that had 12K (2 deposits to two different addresses); taking into consideration the PoS rate, show +20K (in total and available) [pre masternode setup]

- the same wallet shows 16K post Master node setup

(the balances referenced are truncated down)

your feedback is highly appreciated...

SyndicateLabs

full member

Activity: 896

Merit: 100

PredX - AI-Powered Prediction Market

Quote from: Triqa on June 16, 2016, 08:17:21 AM

Quote from: GTX980Power on June 16, 2016, 01:12:37 AM

Quote from: SyndicateLabs on June 15, 2016, 09:34:22 PM

Wallet update v1.0.0.1

Fix for my masternodes tab display bug & added a checkpoint at block 1000

Source
https://github.com/SyndicateLabs/SyndicateQT

Windows Wallet
https://github.com/SyndicateLabs/SyndicateQT/releases/tag/v1.0.0.1

https://www.virustotal.com/en/file/0e6c6dd21e8fe37d6af425b358c50a19cfae70e5f23605a8699a6c5a55e1cd23/analysis/1466037883/
https://www.virustotal.com/en/file/5ce6b3307b97678dbeaa5d1ad8bb456eb3f01f96d9c2e9cc1bb357bf69463544/analysis/1466040389/

Windows Daemon
https://github.com/SyndicateLabs/SyndicateQT/releases/tag/v1.0.0.1

https://www.virustotal.com/en/file/d067d5a4baf022209d666fc62668a7fd00943b443f30813aec830fbacdaf92f2/analysis/1466040554/

Niceeeeeee

Awesome.
I like this active dev + fair distribution coin.

NO IPO/ No premine. This coin has a bright future.
I will hodl longterm.

Thank you! & yes it does!

Ill have some updates ready soon, I'm currently working on revamping the ANN thread!

SyndicateLabs

full member

Activity: 896

Merit: 100

PredX - AI-Powered Prediction Market

Quote from: Mantome on June 16, 2016, 06:55:08 AM

Active Dev. i like coins with active Dev. they have a big future .
Could anyone run a masternode? Only 2 master node is available.

Yes masternodes are ready to be ran! Everyone can stake their balance and rewards from the same wallet!

9,950,000 POW Supply / 5000 SYNX = 1990 potential masternodes!

Lets create a strong network!

Triqa

member

Activity: 77

Merit: 10

Quote from: GTX980Power on June 16, 2016, 01:12:37 AM

Quote from: SyndicateLabs on June 15, 2016, 09:34:22 PM

Wallet update v1.0.0.1

Fix for my masternodes tab display bug & added a checkpoint at block 1000

Source
https://github.com/SyndicateLabs/SyndicateQT

Windows Wallet
https://github.com/SyndicateLabs/SyndicateQT/releases/tag/v1.0.0.1

https://www.virustotal.com/en/file/0e6c6dd21e8fe37d6af425b358c50a19cfae70e5f23605a8699a6c5a55e1cd23/analysis/1466037883/
https://www.virustotal.com/en/file/5ce6b3307b97678dbeaa5d1ad8bb456eb3f01f96d9c2e9cc1bb357bf69463544/analysis/1466040389/

Windows Daemon
https://github.com/SyndicateLabs/SyndicateQT/releases/tag/v1.0.0.1

https://www.virustotal.com/en/file/d067d5a4baf022209d666fc62668a7fd00943b443f30813aec830fbacdaf92f2/analysis/1466040554/

Niceeeeeee

Awesome.
I like this active dev + fair distribution coin.

NO IPO/ No premine. This coin has a bright future.
I will hodl longterm.

Mantome

full member

Activity: 126

Merit: 100

Active Dev. i like coins with active Dev. they have a big future .
Could anyone run a masternode? Only 2 master node is available.

GTX980Power

full member

Activity: 193

Merit: 108

Quote from: SyndicateLabs on June 15, 2016, 09:34:22 PM

Wallet update v1.0.0.1

Fix for my masternodes tab display bug & added a checkpoint at block 1000

Source
https://github.com/SyndicateLabs/SyndicateQT

Windows Wallet
https://github.com/SyndicateLabs/SyndicateQT/releases/tag/v1.0.0.1

https://www.virustotal.com/en/file/0e6c6dd21e8fe37d6af425b358c50a19cfae70e5f23605a8699a6c5a55e1cd23/analysis/1466037883/
https://www.virustotal.com/en/file/5ce6b3307b97678dbeaa5d1ad8bb456eb3f01f96d9c2e9cc1bb357bf69463544/analysis/1466040389/

Windows Daemon
https://github.com/SyndicateLabs/SyndicateQT/releases/tag/v1.0.0.1

https://www.virustotal.com/en/file/d067d5a4baf022209d666fc62668a7fd00943b443f30813aec830fbacdaf92f2/analysis/1466040554/

Niceeeeeee

SyndicateLabs

full member

Activity: 896

Merit: 100

PredX - AI-Powered Prediction Market

Wallet update v1.0.0.1

Fix for my masternodes tab display bug & added a checkpoint at block 1000

Source
https://github.com/SyndicateLabs/SyndicateQT

Windows Wallet
https://github.com/SyndicateLabs/SyndicateQT/releases/tag/v1.0.0.1

https://www.virustotal.com/en/file/0e6c6dd21e8fe37d6af425b358c50a19cfae70e5f23605a8699a6c5a55e1cd23/analysis/1466037883/
https://www.virustotal.com/en/file/5ce6b3307b97678dbeaa5d1ad8bb456eb3f01f96d9c2e9cc1bb357bf69463544/analysis/1466040389/

Windows Daemon
https://github.com/SyndicateLabs/SyndicateQT/releases/tag/v1.0.0.1

https://www.virustotal.com/en/file/d067d5a4baf022209d666fc62668a7fd00943b443f30813aec830fbacdaf92f2/analysis/1466040554/

SyndicateLabs

full member

Activity: 896

Merit: 100

PredX - AI-Powered Prediction Market

Quote from: Peltig on June 15, 2016, 06:11:59 PM

Quote from: SyndicateLabs on June 15, 2016, 04:48:42 PM

Quote from: Peltig on June 15, 2016, 04:39:18 PM

I couldn't run a master node Dev . i think i did something wrong at step 17.
What's the line after "-datadir=c:/username/youruser" ?

Are you trying to run 1 Masternode or more than 1?

More than one.

I'm sorry, I just noticed it didnt print to PDF correctly, the .bat file to start the daemons should look as follows:

Code:

start /MIN C:\Users\YOURUSERNAME\AppData\Roaming\Syndicate2\Syndicated.exe -datadir=C:\Users\YOURUSERNAME\AppData\Roaming\Syndicate2
start /MIN C:\Users\YOURUSERNAME\AppData\Roaming\Syndicate3\Syndicated.exe -datadir=C:\Users\YOURUSERNAME\AppData\Roaming\Syndicate3
start /MIN C:\Users\YOURUSERNAME\AppData\Roaming\Syndicate4\Syndicated.exe -datadir=C:\Users\YOURUSERNAME\AppData\Roaming\Syndicate4

You must replace "YOURUSERNAME" with your own windows username.

Peltig

full member

Activity: 126

Merit: 100

★YoBit.Net★ 350+ Coins Exchange & Dice

Quote from: SyndicateLabs on June 15, 2016, 04:48:42 PM

Quote from: Peltig on June 15, 2016, 04:39:18 PM

I couldn't run a master node Dev . i think i did something wrong at step 17.
What's the line after "-datadir=c:/username/youruser" ?

Are you trying to run 1 Masternode or more than 1?

More than one.

Topic: [SYNX] Syndicate | Business Management Platform | NEW BETA v1.0.1.7 RELEASED! | - page 154. (Read 235769 times)