T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 79.

ripcurrent

member

Activity: 160

Merit: 10

Is it better to set a manual diff?

trexsupport

newbie

Activity: 18

Merit: 0

Quote from: ripcurrent on October 28, 2018, 04:15:20 PM

Im seeing a large H/S from client side ans server side this this miner...my one rig says 93mh and the pool side says 45mh..anyone else see this?

It's possible if you are not using manual diff. With various difficulty you can see jumps lower or higher of your console hashrate by 50-60%

ripcurrent

member

Activity: 160

Merit: 10

Im seeing a large H/S from client side ans server side this this miner...my one rig says 93mh and the pool side says 45mh..anyone else see this?

N0pr3s3n7

member

Activity: 107

Merit: 11

Quote from: bachani_rs on October 28, 2018, 03:00:47 PM

Quote from: Dr_Victor on October 28, 2018, 01:01:25 PM

Quote from: joseph32 on October 28, 2018, 12:21:33 PM

Quote from: peteycamey on October 28, 2018, 06:21:50 AM

thanks for adding X22i algorithm. Only problem is intensity greater than 23 causes crash.

Depends on the GPU and i guess on the overclocks. MSI and Gigabyte 1080Ti's perfectly working with 24 and giving 13,15 MH/s (25 will crash).

Even with 13,5 what is the reason to mine SUQA? It is less than 1$ per day per gtx 1080 ti.
https://www.coincalculators.io/coin.aspx?crypto=suqa-mining-calculator

Victor, with 250 merit I really tought you are a Dr. but this comment cleared all...
what if I tell you after 6 months to recalculate was is worth to mine daily 96 SuQa coin with 1 1080ti.

do you really see in future ? And why make general conclusion because raven skyrocket and made hyper huge success overall. Why do you think any coin that promotes ASIC + FPGA resistance is going to be top 100 or even better coinmarket cap coin ? Did you read SUQA whitepaper ? I dont see as much value as rvn actually , depending on DEVS this coin could easily get to the bottom at some point.

Also if at the moment you mine 96 SQUA with 1 1080 ti , but instead you mine RVN and sell it instantly every 24hours and buy 150 SQUA and hold it . WHich one is more profitable buddy ? ^^

bachani_rs

newbie

Activity: 37

Merit: 0

Quote from: Dr_Victor on October 28, 2018, 01:01:25 PM

Quote from: joseph32 on October 28, 2018, 12:21:33 PM

Quote from: peteycamey on October 28, 2018, 06:21:50 AM

thanks for adding X22i algorithm. Only problem is intensity greater than 23 causes crash.

Depends on the GPU and i guess on the overclocks. MSI and Gigabyte 1080Ti's perfectly working with 24 and giving 13,15 MH/s (25 will crash).

Even with 13,5 what is the reason to mine SUQA? It is less than 1$ per day per gtx 1080 ti.
https://www.coincalculators.io/coin.aspx?crypto=suqa-mining-calculator

Victor, with 250 merit I really tought you are a Dr. but this comment cleared all...
what if I tell you after 6 months to recalculate was is worth to mine daily 96 SuQa coin with 1 1080ti.

Dr_Victor

sr. member

Activity: 954

Merit: 250

Quote from: joseph32 on October 28, 2018, 12:21:33 PM

Quote from: peteycamey on October 28, 2018, 06:21:50 AM

thanks for adding X22i algorithm. Only problem is intensity greater than 23 causes crash.

Depends on the GPU and i guess on the overclocks. MSI and Gigabyte 1080Ti's perfectly working with 24 and giving 13,15 MH/s (25 will crash).

Even with 13,5 what is the reason to mine SUQA? It is less than 1$ per day per gtx 1080 ti.
https://www.coincalculators.io/coin.aspx?crypto=suqa-mining-calculator

joseph32

member

Activity: 418

Merit: 21

Quote from: peteycamey on October 28, 2018, 06:21:50 AM

thanks for adding X22i algorithm. Only problem is intensity greater than 23 causes crash.

Depends on the GPU and i guess on the overclocks. MSI and Gigabyte 1080Ti's perfectly working with 24 and giving 13,15 MH/s (25 will crash).

bachani_rs

newbie

Activity: 37

Merit: 0

Quote from: peteycamey on October 28, 2018, 06:21:50 AM

thanks for adding X22i algorithm. Only problem is intensity greater than 23 causes crash.

My 1080ti is crashing even on 20, I use -i 18 to stay stable.

rgzrgz

member

Activity: 151

Merit: 10

Hi dear dev,
How to add failover servers?
like Claymore epools.txt?
thx

peteycamey

legendary

Activity: 1185

Merit: 1021

thanks for adding X22i algorithm. Only problem is intensity greater than 23 causes crash.

mak013

hero member

Activity: 2548

Merit: 769

my HiveOS write "11:36:30 CRITICAL: Can't start miner, algorithm "x16r" isn't supported" oO. Then i remove algo from additional parameters - "CRITICAL: Can't start miner, algorithm "" isn't supported"
Trying to use 0.7.0, 0.7.1, 0.7.2. I think i`m doing smth wrong but cant underatand where is mistake. Can someone help to solve such a problem?

nazzer

member

Activity: 238

Merit: 11

Quote from: trexminer on October 27, 2018, 09:38:56 PM

Quote from: nazzer on October 27, 2018, 07:05:10 PM

Quote from: trexsupport on October 27, 2018, 05:53:03 AM

Quote from: nazzer on October 27, 2018, 05:27:33 AM

Trexminer :

0.7.1 and 0.7.2 seem to crash after mining the dev fee - 0.7.0 was fine

Give please some info about cuda version, Windows version ( which updates installed too )

...
Note- this is not limited to Windows, it also happens on Linux with CUDA 9.1 :

Thanks nazzer, we'll look into it.

Thanks - I've reverted back to 0.7.0 now, for stable x16r hashing

trexminer

member

Activity: 283

Merit: 63

Quote from: nazzer on October 27, 2018, 07:05:10 PM

Quote from: trexsupport on October 27, 2018, 05:53:03 AM

Quote from: nazzer on October 27, 2018, 05:27:33 AM

Trexminer :

0.7.1 and 0.7.2 seem to crash after mining the dev fee - 0.7.0 was fine

Give please some info about cuda version, Windows version ( which updates installed too )

...
Note- this is not limited to Windows, it also happens on Linux with CUDA 9.1 :

Thanks nazzer, we'll look into it.

nazzer

member

Activity: 238

Merit: 11

Quote from: trexsupport on October 27, 2018, 05:53:03 AM

Quote from: nazzer on October 27, 2018, 05:27:33 AM

Trexminer :

0.7.1 and 0.7.2 seem to crash after mining the dev fee - 0.7.0 was fine

Give please some info about cuda version, Windows version ( which updates installed too )

Logs - from Windows:


Windows 10 1803 

UpdateCUDA / Driver:
20181028 07:54:50 T-Rex NVIDIA GPU miner v0.7.2  -  [CUDA v10.0]
20181028 07:54:50
20181028 07:54:50 NVIDIA Driver v416.16

Code:

20181028 07:53:05 [ OK ] 273/273 - 14.90 MH/s, 12ms
20181028 07:53:11 [ OK ] 274/274 - 14.92 MH/s, 10ms
20181028 07:53:17 WARN: 2 shares found
20181028 07:53:17 [ OK ] 275/275 - 14.77 MH/s, 11ms
20181028 07:53:17 GPU #0: Zotac GTX 1070 - 10.70 MH/s, [T:73C, P:98W, F:53%, E:104kH/W]
20181028 07:53:17 GPU #1: Zotac GTX 1050 Ti - 4070.12 kH/s, [T:55C, F:56%]
20181028 07:53:17 Uptime: 34 mins 17 secs
20181028 07:53:18 [ OK ] 276/276 - 14.77 MH/s, 59ms
20181028 07:53:23 Started mining dev fee
20181028 07:54:03 x16r block 423144, diff 85216.305
20181028 07:54:14 x16r block 423145, diff 85059.350
20181028 07:54:23 Done mining dev fee
20181028 07:54:25 [ OK ] 277/277 - 16.88 MH/s, 11ms
20181028 07:54:33 [ OK ] 278/278 - 18.26 MH/s, 10ms
20181028 07:54:43 WARN: Messy shutdown...
20181028 07:54:43 Main loop finished.
20181028 07:54:43 ApiServer: stopped listening on 0.0.0.0:4067
20181028 07:54:43 ApiServer: stopped listening on 0.0.0.0:4068

Note- this is not limited to Windows, it also happens on Linux with CUDA 9.1 :

Code:

20181028 07:23:06 Uptime: 1 hour 19 mins 51 secs
20181028 07:23:19 [ OK ] 411/421 - 60.31 MH/s, 12ms
20181028 07:23:49 x16r block 423119, diff 90213.867
20181028 07:23:49 Hash order B4C811FCA4BAD9A5
20181028 07:23:49 HamKckFugShvBmwBmwShaFugEchKckHamEchShbSmdEchSke
20181028 07:23:54 [ OK ] 412/422 - 63.80 MH/s, 12ms
20181028 07:24:07 [ OK ] 413/423 - 73.25 MH/s, 13ms
20181028 07:24:09 Started mining dev fee
20181028 07:25:09 Done mining dev fee
20181028 07:25:11 [ OK ] 414/424 - 80.07 MH/s, 14ms
20181028 07:25:16 x16r block 423120, diff 92111.904
20181028 07:25:16 Hash order 64D95ED776FA511C
20181028 07:25:16 LufKckShbSmdSkeWrlShbCubCubLufShaEchSkeBmwBmwFug
20181028 07:25:22 [ OK ] 415/425 - 83.63 MH/s, 13ms
20181028 07:25:22 GPU #0: Zotac GTX 1070 - 13.67 MH/s, [T:57C, P:99W, F:100%, E:147kH/W]
20181028 07:25:22 GPU #1: Zotac GTX 1070 - 13.55 MH/s, [T:66C, P:91W, F:100%, E:161kH/W]
20181028 07:25:22 GPU #2: GTX 1070 - 14.01 MH/s, [T:63C, P:90W, F:100%, E:156kH/W]
20181028 07:25:22 GPU #3: GTX 1070 - 13.96 MH/s, [T:64C, P:94W, F:80%, E:144kH/W]
20181028 07:25:22 GPU #4: GTX 1070 - 14.12 MH/s, [T:62C, P:85W, F:100%, E:168kH/W]
20181028 07:25:22 GPU #5: GTX 1070 - 14.32 MH/s, [T:59C, P:71W, F:80%, E:161kH/W]
20181028 07:25:22 Uptime: 1 hour 22 mins 7 secs
20181028 07:25:29 [ OK ] 416/426 - 87.84 MH/s, 16ms
20181028 07:25:29 WARN: Messy shutdown...
20181028 07:25:29 Main loop finished.
20181028 07:25:29 ApiServer: stopped listening on 0.0.0.0:4067
20181028 07:25:29 ApiServer: stopped listening on 192.168.1.224:4068
20181028 07:25:29 [ OK ] 417/427 - 0.00 H/s, 12ms
./miner2_x16r_ahashpool.sh: line 12: 32641 Killed
~/trex/t-rex -r 0 -a x16r -o stratum+tcp://x16r.mine.ahashpool.com:3636 
-u REMOVED p c=BTC,d=48 -b 192.168.1.224:4068 -J -i 19.5
20181028 07:25:36 T-Rex NVIDIA GPU miner v0.7.2  -  [CUDA v9.10]
20181028 07:25:36
20181028 07:25:36 NVIDIA Driver v390.30
20181028 07:25:36 CUDA devices available: 6

Yashnik

newbie

Activity: 23

Merit: 0

Will you be adding support for Aion's equihash 210_9 algo?

Thanks!

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: Saphire on October 27, 2018, 05:16:47 AM

Thank you for adding x22i algo.
I want to share my hashrates using Trex miner

Nvidia GTX 1070 - 6.4MH/s (Gigabyte GTX 1070 OC )
Nvidia GTX 1070 Ti - 7.5 Mh/s (Gigabyte GTX 1070Ti OC )
Nvidia GTX 1080Ti - 11.5 Mh/s (MSI GTX 1080Ti)

100 Mh Core OC only.

How many kH/Watt?

My 750ti's hashrate.

Core 1.345 ghz and mem 1.620 ghz.
20181027 15:10:46 x22i block 21744, diff 17162.719
20181027 15:10:45 WARN: GPU #0: Gigabyte GeForce GTX 750 Ti, intensity set to 15
20181027 15:10:45 WARN: GPU #1: Gigabyte GeForce GTX 750 Ti, intensity set to 18
20181027 15:13:06 GPU #0: Gigabyte GTX 750 Ti - 1518.29 kH/s, [T:52C, P:31W, F:56%, E:51kH/W]
20181027 15:13:06 GPU #1: Gigabyte GTX 750 Ti - 1619.46 kH/s, [T:50C, P:29W, F:39%, E:52kH/W]

EDIT: I set my memory clocks to stock..... OC the memory didn't make much difference.

ben-bronze

newbie

Activity: 1

Merit: 0

Made an account to say thanks for this miner! I'm getting 8600 kH/s + on a GTX 1080 (non-ti) on x22i. zjazz miner was getting me somewhere closer to 5600.

etkisizeleman

member

Activity: 170

Merit: 11

how to install hiveos

i dont install help please

lordnitro

member

Activity: 104

Merit: 10

pretty badass miner!
went from 1.6mh/s for x22i to 4.3mh/s! @1060 6G
E: 36-56Kh/W

Lets see how the other algos do their way

20181027 19:03:29 [ OK ] 362/362 - 4285.83 kH/s, 65ms
20181027 19:03:29 [ OK ] 363/363 - 4285.83 kH/s, 65ms
20181027 19:03:30 [ OK ] 364/364 - 4285.54 kH/s, 65ms
20181027 19:03:32 [ OK ] 365/365 - 4286.73 kH/s, 67ms
20181027 19:03:32 GPU #0: ASUS GTX 1060 6GB - 4286.73 kH/s, [T:59C, P:112W, F:55%, E:40kH/W]
20181027 19:03:32 Uptime: 37 mins 27 secs
20181027 19:03:32 [ OK ] 366/366 - 4286.53 kH/s, 66ms
20181027 19:03:33 [ OK ] 367/367 - 4286.47 kH/s, 65ms
20181027 19:03:34 [ OK ] 368/368 - 4285.97 kH/s, 66ms
20181027 19:03:36 [ OK ] 369/369 - 4285.35 kH/s, 66ms
20181027 19:03:37 [ OK ] 370/370 - 4285.69 kH/s, 65ms
20181027 19:03:37 GPU #0: ASUS GTX 1060 6GB - 4285.69 kH/s, [T:59C, P:121W, F:55%, E:40kH/W]
20181027 19:03:37 Uptime: 37 mins 32 secs
20181027 19:03:38 [ OK ] 371/371 - 4286.19 kH/s, 65ms
20181027 19:03:38 [ OK ] 372/372 - 4286.19 kH/s, 64ms
20181027 19:03:38 WARN: 2 shares found
20181027 19:03:38 [ OK ] 373/373 - 4285.06 kH/s, 65ms
20181027 19:03:38 [ OK ] 374/374 - 4285.06 kH/s, 66ms
20181027 19:03:40 WARN: New difficulty: 0.008
20181027 19:03:40 x22i block 21678, diff 11422.459
20181027 19:03:48 [ OK ] 375/375 - 4284.50 kH/s, 65ms
20181027 19:03:48 GPU #0: ASUS GTX 1060 6GB - 4284.50 kH/s, [T:59C, P:116W, F:55%, E:39kH/W]
20181027 19:03:48 Uptime: 37 mins 42 secs
20181027 19:03:54 [ OK ] 376/376 - 4279.50 kH/s, 73ms
20181027 19:03:58 [ OK ] 377/377 - 4280.36 kH/s, 66ms
20181027 19:04:07 [ OK ] 378/378 - 4278.31 kH/s, 74ms
20181027 19:04:21 [ OK ] 379/379 - 4285.33 kH/s, 68ms

MinedTangerine

jr. member

Activity: 308

Merit: 4

Quote from: Nalut on October 27, 2018, 08:33:45 AM

Quote from: silicastorm on October 27, 2018, 07:15:36 AM

Anyone able to throw up their new bat file config for SUQA?

Thanks in advance,

Suqa coin is not listed on exchange sites yet, am i right?

Its listed on Stex and Escodex. CB comming soon.

Topic: T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 79. (Read 175032 times)