Team Black Miner (ETHW ETC Vertcoin Ravencoin Zilliqa +dual +tripple mining ) - page 105.

somaton

jr. member

Activity: 212

Merit: 6

So, why did you put at least 1 virus according to virustotal? Wink

Lets see how long it takes to "find" more than only 1. Most miners will be removed by windows security, but it does not mean that it is really that dangerous.
I know very well who you are, mining from 2013 and used some of your mods and kernels.
I tried different oc settings and as i mentioned before, all i get is lower hash speed, but no complainings about corrupted dag from tbm.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: somaton on September 24, 2021, 08:05:29 PM

No track record for T-rex???

28 hits on virustotal in 2021..

Quote from: somaton on September 24, 2021, 08:05:29 PM

I'm using it from beginning of 2018, it is more than 3,5 years, was beta testing it in 2018...How old is "TBM"?

I have been optimizing mining software since 2013. The t-rex ethereum kernel is a copy of the work I did back in 2014. google ccminer,

Quote from: somaton on September 24, 2021, 08:05:29 PM

Fix "Dag verification failed. Exiting..." problem and lets see then. For me, and as few more people reported
here, this is problem number 1.

An unoptimized kernel can run at a higher clock, but it doesn't increase your profit.

Quote from: somaton on September 24, 2021, 08:05:29 PM

If i lower memory oc (200-300 mhz!), then tbm will start, but hash speed is lower compared to t-rex even with --xintensity -1.

Keep the memclock, lower the core clock increase the tdp, change the pool.

somaton

jr. member

Activity: 212

Merit: 6

Quote from: ?? on ??

T-rex with 28 hits on virustotal and no trackrecord.. You should be careful with the other miners.

Increase your profit with Team Black...

No track record for T-rex??? I'm using it from beginning of 2018, it is more than 3,5 years, was beta testing it in 2018...How old is "TBM"?

Fix "Dag verification failed. Exiting..." problem and lets see then. For me, and as few more people reported here, this is problem number 1. If i lower memory oc (200-300 mhz!), then tbm will start, but hash speed is lower compared to t-rex even with --xintensity -1. Try to do something like lolminer and repair corrupted dag or make it possible to adjust gpu/memory clocks throught nvidia-smi and reset oc settings when building dag then turn oc back on after dag is done. When this problem is solved, i'm sure you will have more users/hash. In current situation there is no other easy way, at least for me.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: vstyle on September 24, 2021, 05:57:54 PM

the reported hashrate still shows up 0 on ethermine for me on the new version

Ethermine is not following protocol. If pools don't play by the rules, you should change to a more profitable pool.

Quote from: skablast on September 24, 2021, 04:52:38 PM

I am testing it in Linux now, btw but I can understand why people is careful

T-rex with 28 hits on virustotal and no trackrecord.. You should be careful with the other miners.

Increase your profit with Team Black...
https://www.pouet.net/

[moderator's note: consecutive posts merged]

vstyle

newbie

Activity: 2

Merit: 0

the reported hashrate still shows up 0 on ethermine for me on the new version

skablast

member

Activity: 476

Merit: 19

Sp, may be is due to the fact that no matter what I do, Chrome,Edge and Firefox doesn't let me ( and others) download it ? 1.06, 1,07, 1,08 versions

I am testing it in Linux now, btw but I can understand why people is careful

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: somaton on September 24, 2021, 02:19:39 PM

Still crashing when creating dag and because of this, only 2/9 of my rigs use your miner. Reported about this one before, but did not get any answer: when mining

You need to retune your rig. Start from scratch. Lower the core clock , add a few percent power, play with the --xintensity, perhaps change pool?
Gain a few percent...

Quote from: somaton on September 24, 2021, 02:19:39 PM

with MPH console is showing difficulty as "3.00". What number is that? Nbminer shows 12,89G, t-rex 12,88 G. MPH always had high difficulty with 1-2 shares every ~5 min with 3060ti, so i'm sure that TBM is showing wrong number.

Ethproxy and ethereum stratum(2 different protocols) has 2 different way to display the difficulty. We show the Ethproxy diff for ethproxy pools, the others convert to Eth stratum 1.0 diff.

Team black

New cryptocurrency miner in 2021 created by opensource developers...

https://www.virustotal.com/gui/file/ffc8ae28c0dd6c95ff6fc06c7968df4aee278c5e8d6a3932f16be6a0c7ccc2bc?nocache=1

This is what some of you are currently running:

https://www.virustotal.com/gui/file/d53839aa4eb5097c467904e046b436184a746d7d30a4407c2c06ddabf9053fab

Some kids @ reddit are blocking my posts claiming I am spreading malware. But you see where the malware is coming from...

Please support our hard work and add some likes to our posts @reddit

https://www.reddit.com/r/EtherMining/

[moderator's note: consecutive posts merged]

somaton

jr. member

Activity: 212

Merit: 6

Tried 1.08 (or is it 1.8? last 3 versions lost 0 after .). Still crashing when creating dag and because of this, only 2/9 of my rigs use your miner. Reported about this one before, but did not get any answer: when mining with MPH console is showing difficulty as "3.00". What number is that? Nbminer shows 12,89G, t-rex 12,88 G. MPH always had high difficulty with 1-2 shares every ~5 min with 3060ti, so i'm sure that TBM is showing wrong number.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: dle378 on September 24, 2021, 11:23:12 AM

I've been running TBM for about 20 hours now with x-intensity setting 32 and so far it's been doing extremely well compared to T-Rex Miner.

Great work so far!

Thanks.

v1.08
1. Fixed submit hashrate on ethermine
2. Added more pools
3. Improved Dag creation (cuda)
4. Added support for more devices in amd stats
5. Fixed bug in average submitted time in the console

https://github.com/sp-hash/TeamBlackMiner/releases/

TeamBlackMiner_1_08_cuda_11_2.7z
https://www.virustotal.com/gui/file/fb1e8a13beebc598d12a0f24d983c156523f8f5d4465d7328d42108407669927?nocache=1

TeamBlackMiner_1_08_cuda_11_4.7z
https://www.virustotal.com/gui/file/4d89f09fa39a486391854ef49061942c3aaa06a3dd5cb9177b41b84a7a3e580b?nocache=1

TeamBlackMiner_1_08_Ubuntu_18_04_Cuda_11_4.zip
https://www.virustotal.com/gui/file/ffc8ae28c0dd6c95ff6fc06c7968df4aee278c5e8d6a3932f16be6a0c7ccc2bc?nocache=1

[moderator's note: consecutive posts merged]

dle378

copper member

Activity: 77

Merit: 0

I've been running TBM for about 20 hours now with x-intensity setting 32 and so far it's been doing extremely well compared to T-Rex Miner.

https://imgur.com/a/f4D0w7P

Great work so far!

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

You report that AMD stats are broken, but working fine here on 3 rigs.. Recent Adraline drivers (from 2021). Anybody else have a picture with stats for AMD, and driver version?

(Remember to activate compute mode on the devices)

You need a driver that support ADL2_OverdriveN_Capabilities

EDIT: We seem to have forgot to support overdrive8, so this will be added in the next version. New cards need v8.

Prelude

legendary

Activity: 1596

Merit: 1000

Definitely gets more speed, around 135MH/s on this 3090. But, poolside rejects go up to around 2.5-5%, vs ~128.5MH/s with 1% rejects at xintensity 32. If I understand flexpool properly, it only pays rejects up to 1%, so until I switch pools I gotta keep it below 1%. Pretty fond of flexpool though, it's usually one of the better earning pools. Need to run the math on the increased speed with rejects at a pool that pays for stales, but I assume the extra speed would come out on top.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

try with --xintensity -1. More speed on some pools

Prelude

legendary

Activity: 1596

Merit: 1000

I am using 11.4 and 472.12 is the latest nVidia driver release.

Running that command returns N/A, yes.

Perhaps there's another function you could be using to pull VRAM temps? Temperatures show up fine in T-Rex and HWInfo64.

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

You need cuda 11.4 version and the latest driver

try to run the following in the command:

nvidia-smi --query-gpu=temperature.memory --id=0 --format=csv

Do you get:
temperature.memory
N/A

Quote from: dle378 on September 20, 2021, 02:35:15 PM

Disregard the previous post. I updated to the latest Nvidia driver (471.12) and now it shows the Power Draw, Core Clock, and Memory Clock.

Prelude

legendary

Activity: 1596

Merit: 1000

Been away for a while, but just tested 1.07 with 472.12 and I'm still not getting memory temps on 3080/3090s.

ex_

newbie

Activity: 3

Merit: 0

Quote from: sp_ on September 23, 2021, 04:01:26 PM

Quote from: ex_ on September 23, 2021, 03:49:20 PM

Still seems to be an issue with AMD stats.

Can you move the file atiadlxx.dll out of the folder and try again?

Tried that now - still seems to be an issue with the stats.

15m [2021-09-23 23:18:07.020] eth-de.flexpool.io (ethash) PING: 193ms DIFFICULTY: 0.931 EPOCH: 442
15m [2021-09-23 23:18:07.020]
15m [2021-09-23 23:18:07.020]
15m [2021-09-23 23:18:07.020] ID BOARD TEMP FAN CORE MEM WATT kW/h COST/h
15m [2021-09-23 23:18:07.020] GPU0 6800XT 0/0 0 0 0 0 0.00 0.00USD
15m [2021-09-23 23:18:07.020] GPU1 6800XT 0/0 0 0 0 0 0.00 0.00USD
15m [2021-09-23 23:18:07.020] GPU2 6800XT 0/0 0 0 0 0 0.00 0.00USD
15m [2021-09-23 23:18:07.020] GPU3 6800XT 0/0 0 0 0 0 0.00 0.00USD
15m [2021-09-23 23:18:07.020] GPU4 6800XT 0/0 0 0 0 0 0.00 0.00USD
15m [2021-09-23 23:18:07.020] GPU5 6800XT 0/0 0 0 0 0 0.00 0.00USD
15m [2021-09-23 23:18:07.020] 0 0.00 0.00USD
15m [2021-09-23 23:18:07.020]
15m [2021-09-23 23:18:07.020] ID BOARD TYPE HASHRATE/W HASHRATE AVERAGE SHARES
15m [2021-09-23 23:18:07.020] GPU0 6800XT OpenCL 0.00 H/W 67.49 MH/s 67.91 MH/s 17/0/1 (100.00)
15m [2021-09-23 23:18:07.020] GPU1 6800XT OpenCL 0.00 H/W 67.49 MH/s 67.79 MH/s 13/0/0 (100.00)
15m [2021-09-23 23:18:07.020] GPU2 6800XT OpenCL 0.00 H/W 67.50 MH/s 68.03 MH/s 12/0/0 (100.00)
15m [2021-09-23 23:18:07.020] GPU3 6800XT OpenCL 0.00 H/W 67.49 MH/s 67.49 MH/s 13/0/0 (100.00)
15m [2021-09-23 23:18:07.020] GPU4 6800XT OpenCL 0.00 H/W 67.49 MH/s 68.02 MH/s 18/0/0 (100.00)
15m [2021-09-23 23:18:07.020] GPU5 6800XT OpenCL 0.00 H/W 70.12 MH/s 68.28 MH/s 17/0/0 (100.00)
15m [2021-09-23 23:18:07.020] 0.00 H/s 407.58 MH/s 407.53 MH/s 90/0/1 (100.00)
15m [2021-09-23 23:18:07.020]

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: ex_ on September 23, 2021, 03:49:20 PM

Still seems to be an issue with AMD stats.

Can you move the file atiadlxx.dll out of the folder and try again?

ex_

newbie

Activity: 3

Merit: 0

Quote from: ?? on ??

fixed

https://github.com/sp-hash/TeamBlackMiner/releases/

TeamBlackMiner_1_07_cuda_11_2.7z
https://www.virustotal.com/gui/file/a7d65d91efcd29923755f7c28ea2d2d95927639f281f1afa8707f0b074a7bc70?nocache=1

TeamBlackMiner_1_07_cuda_11_4.7z
https://www.virustotal.com/gui/file/244f4aaed2e63531e4dff8c8c44ef0138a5681907528fdba1455895442a9bfa6?nocache=1

Thank you.

1.07 runs with --cl-devices now. Still seems to be an issue with AMD stats.
8m [2021-09-23 22:48:30.017] eth-de.flexpool.io (ethash) PING: 194ms DIFFICULTY: 0.931 EPOCH: 442
8m [2021-09-23 22:48:30.017]
8m [2021-09-23 22:48:30.017]
8m [2021-09-23 22:48:30.017] ID BOARD TEMP FAN CORE MEM WATT kW/h COST/h
8m [2021-09-23 22:48:30.017] GPU0 6800XT 0/0 0 0 0 0 0.00 0.00USD
8m [2021-09-23 22:48:30.017] GPU1 6800XT 0/0 0 0 0 0 0.00 0.00USD
8m [2021-09-23 22:48:30.017] GPU2 6800XT 0/0 0 0 0 0 0.00 0.00USD
8m [2021-09-23 22:48:30.017] GPU3 6800XT 0/0 0 0 0 0 0.00 0.00USD
8m [2021-09-23 22:48:30.017] GPU4 6800XT 0/0 0 0 0 0 0.00 0.00USD
8m [2021-09-23 22:48:30.017] GPU5 6800XT 0/0 0 0 0 0 0.00 0.00USD
8m [2021-09-23 22:48:30.017] 0 0.00 0.00USD
8m [2021-09-23 22:48:30.017]
8m [2021-09-23 22:48:30.017] ID BOARD TYPE HASHRATE/W HASHRATE AVERAGE SHARES
8m [2021-09-23 22:48:30.017] GPU0 6800XT OpenCL 0.00 H/W 67.29 MH/s 67.29 MH/s 6/0/0 (100.00)
8m [2021-09-23 22:48:30.017] GPU1 6800XT OpenCL 0.00 H/W 67.49 MH/s 67.49 MH/s 5/0/0 (100.00)
8m [2021-09-23 22:48:30.017] GPU2 6800XT OpenCL 0.00 H/W 67.49 MH/s 67.60 MH/s 9/0/0 (100.00)
8m [2021-09-23 22:48:30.017] GPU3 6800XT OpenCL 0.00 H/W 67.49 MH/s 67.61 MH/s 10/0/0 (100.00)
8m [2021-09-23 22:48:30.017] GPU4 6800XT OpenCL 0.00 H/W 67.48 MH/s 67.97 MH/s 13/0/0 (100.00)
8m [2021-09-23 22:48:30.017] GPU5 6800XT OpenCL 0.00 H/W 67.49 MH/s 67.49 MH/s 3/0/0 (100.00)
8m [2021-09-23 22:48:30.017] 0.00 H/s 404.73 MH/s 405.44 MH/s 46/0/0 (100.00)
8m [2021-09-23 22:48:30.017]
8m [2021-09-23 22:48:30.017]

sp_

legendary

Activity: 2954

Merit: 1087

Team Black developer

Quote from: ex_ on September 23, 2021, 02:53:41 PM

Using 5600G APU + 6x 6800XT GPUs. 21.9.2 driver on Windows 11.
"No devices are set" error on 1.07 when using --cl-devices

Thanks for testing. The bug has been fixed. I will build a new version

fixed

https://github.com/sp-hash/TeamBlackMiner/releases/

TeamBlackMiner_1_07_cuda_11_2.7z
https://www.virustotal.com/gui/file/a7d65d91efcd29923755f7c28ea2d2d95927639f281f1afa8707f0b074a7bc70?nocache=1

TeamBlackMiner_1_07_cuda_11_4.7z
https://www.virustotal.com/gui/file/244f4aaed2e63531e4dff8c8c44ef0138a5681907528fdba1455895442a9bfa6?nocache=1

Quote from: ep690d01 on September 23, 2021, 01:33:43 PM

7m [2021-09-23 20:33:02.007] GPU0 5500XT 0/0 0 0 0 0 0.00 0.00USD
7m [2021-09-23 20:33:02.007] 0 0.00 0.00USD

Can you try the last upload please? Stats might work. Same name on the archive.

[moderator's note: consecutive posts merged]

Topic: Team Black Miner (ETHW ETC Vertcoin Ravencoin Zilliqa +dual +tripple mining ) - page 105. (Read 35090 times)