open cmd as admin and run:
nvidia-smi -i 0 --lock-gpu-clocks=1500,1500
and change the pool and get a 12% boost in profit.
Topic: Team Black Miner (ETHW ETC Vertcoin Ravencoin Zilliqa +dual +tripple mining ) - page 91. (Read 35100 times)
October 14, 2021, 06:14:44 PM
On nvidia, you can use 1.14b with --xintensity -1 for few stales. You can also try to lock the coreclock to 1500
open cmd as admin and run:
nvidia-smi -i 0 --lock-gpu-clocks=1500,1500
and change the pool and get a 12% boost in profit.
open cmd as admin and run:
nvidia-smi -i 0 --lock-gpu-clocks=1500,1500
and change the pool and get a 12% boost in profit.
October 14, 2021, 03:58:37 PM
Just want to say thanks for getting this going.
I've been running 1.1 for a while now, I've tried all version past 1.1 and it get tons more stale shares, with no changes to my clocks.
https://imgur.com/a/bbGToIc
Think I'll be sticking with the 1.1.
my settings are 66% PL, +1250 Mem, -150 clock and 80% fan speeds.
I've been running 1.1 for a while now, I've tried all version past 1.1 and it get tons more stale shares, with no changes to my clocks.
https://imgur.com/a/bbGToIc
Think I'll be sticking with the 1.1.
my settings are 66% PL, +1250 Mem, -150 clock and 80% fan speeds.
October 14, 2021, 03:39:09 PM
It was the "Reupload" version.
October 14, 2021, 03:25:30 PM
The 1.14 beta had two ulpoads . Make sure you use the latest upload. v1.05 had a slightly different kernel, so might be faster on the old cards. Will check it.
October 14, 2021, 03:13:52 PM
1.1x has a lower default intensity than 1.05 because of less rejected shares on some pools.
I know, still had it set to 224 - cuz never touch a running system. 
Did you try 1.14b ?
Edit; Nvm. It was the Beta version, sorry.
October 14, 2021, 02:57:22 PM
1.1x has a lower default intensity than 1.05 because of less rejected shares on some pools. If you set the --xintensity yourself multiply with 4 in 1.1x
Did you try 1.14b ?
Did you try 1.14b ?
October 14, 2021, 02:52:52 PM
otherwise test tomorrow/later with <1.1x~ and see how that works out. Its just weird that it runs for weeks smooth, and now...
With 1.05 it seems all smooth. Even on my old Profile with Memclock on its absolute Limit.
https://i.imgur.com/cRpn8bw.png
Also funfact on 1.1x; When i let it run with Default Xintensity: less hashrate.
October 14, 2021, 02:37:15 PM
mph has 500 ping on the europe server now. Normally I get ~50 ping
d-dos or something...
d-dos or something...
It's 46ms for me on us-east.
October 14, 2021, 02:28:39 PM
mph has 500 ping on the europe server now. Normally I get ~50 ping
d-dos or something...
The 6600 is already performing pretty good in v1.14b. Why don't you try it out.
[moderator's note: consecutive posts merged]
d-dos or something...
How about other 6000 series cards? 6600 should be quite efficient.
The 6600 is already performing pretty good in v1.14b. Why don't you try it out.
[moderator's note: consecutive posts merged]
October 14, 2021, 02:25:09 PM
Are you running with --xintensity -1? (default) We have improved it in 1.14b
Yes, the AMD cards are -1 Dynamic
October 14, 2021, 02:24:28 PM
Are you running with --xintensity -1? (default) We have improved it in 1.14b
October 14, 2021, 02:18:21 PM
I just love how some sad little people on Imgur just go and downvote my mining stat images for TBM...
Anyway, here is a screenshot of my AMD rig running TBM 1.14b
https://imgur.com/gallery/dbmhQMR
There's not a lot of tweaking or controls in the Windows AMD driver to overclock these cards, but with the basics it seems to be running really well.
Here's the API results from MiningPoolHub:
"getuserworkers" : {
"data" : [
{
"difficulty" : 0,
"hashrate" : 152113.425,
"id" : 18417###,
"monitor" : 1,
"password" : "x",
"username" : "KXXXX.JadeDragon"
},
{
"difficulty" : 0,
"hashrate" : 42949.673,
"id" : 18412###,
"monitor" : 1,
"password" : "x",
"username" : "KXXXX.Seriyu"
},
{
"difficulty" : 0,
"hashrate" : 356124.372,
"id" : 18412###,
"monitor" : 1,
"password" : "x",
"username" : "KXXXX.Smaug"
}
],
"runtime" : 86.09414100647,
"version" : "1.0.0"
}
//Smaug is the AMD rig
Anyway, here is a screenshot of my AMD rig running TBM 1.14b
https://imgur.com/gallery/dbmhQMR
There's not a lot of tweaking or controls in the Windows AMD driver to overclock these cards, but with the basics it seems to be running really well.
Here's the API results from MiningPoolHub:
"getuserworkers" : {
"data" : [
{
"difficulty" : 0,
"hashrate" : 152113.425,
"id" : 18417###,
"monitor" : 1,
"password" : "x",
"username" : "KXXXX.JadeDragon"
},
{
"difficulty" : 0,
"hashrate" : 42949.673,
"id" : 18412###,
"monitor" : 1,
"password" : "x",
"username" : "KXXXX.Seriyu"
},
{
"difficulty" : 0,
"hashrate" : 356124.372,
"id" : 18412###,
"monitor" : 1,
"password" : "x",
"username" : "KXXXX.Smaug"
}
],
"runtime" : 86.09414100647,
"version" : "1.0.0"
}
//Smaug is the AMD rig
October 14, 2021, 02:05:06 PM
Any plan to add LHR unlock support soon?
Not yet. Nvidia will probobly improve the LHR in the next versions. Instead we are optimizing the AMD 6800XT.
If we can get it up to 80MHASH it will be a gamechanger...
How about other 6000 series cards? 6600 should be quite efficient.
October 14, 2021, 02:04:09 PM
Is it bad or good that 10% of the submitted shares are stales for miningpoolhub?
MPH pay 100% for stales so it doesn't matter. But for other pools this intensity can be a problem. Some pools kick you off if the stale share count is more than 5% The stale estimate in the miner window is inaccurate, and poolside stale can vary. This is because every mining pool have their own stale evaluation.
October 14, 2021, 01:37:30 PM
Been running TBM 1.14 with --xintensity 1408 for 17.8 hours now and here are my results below:
1049m [2021-10-14 13:35:41.390] ID BOARD HASHRATE/W HASHRATE AVERAGE SHARES
1049m [2021-10-14 13:35:41.390] GPU0 3060Ti 425.56 kH/W 65.11 MH/s 65.11 MH/s 291/0/34 (100.00)
1049m [2021-10-14 13:35:41.390] GPU1 3060Ti 350.15 kH/W 65.13 MH/s 65.13 MH/s 278/0/34 (100.00)
1049m [2021-10-14 13:35:41.390] GPU2 3060Ti 425.68 kH/W 65.13 MH/s 65.13 MH/s 268/4/34 (98.53)
1049m [2021-10-14 13:35:41.390] GPU3 3060Ti 353.95 kH/W 65.13 MH/s 65.13 MH/s 286/0/37 (100.00)
1049m [2021-10-14 13:35:41.390] GPU4 3060Ti 425.66 kH/W 65.13 MH/s 65.13 MH/s 311/0/46 (100.00)
1049m [2021-10-14 13:35:41.390] GPU5 3060Ti 425.58 kH/W 65.11 MH/s 65.12 MH/s 287/0/42 (100.00)
1049m [2021-10-14 13:35:41.390] 2406.58 kH/W 390.73 MH/s 390.74 MH/s 1721/4/227 (99.77)
Is it bad or good that 10% of the submitted shares are stales for miningpoolhub?
1049m [2021-10-14 13:35:41.390] ID BOARD HASHRATE/W HASHRATE AVERAGE SHARES
1049m [2021-10-14 13:35:41.390] GPU0 3060Ti 425.56 kH/W 65.11 MH/s 65.11 MH/s 291/0/34 (100.00)
1049m [2021-10-14 13:35:41.390] GPU1 3060Ti 350.15 kH/W 65.13 MH/s 65.13 MH/s 278/0/34 (100.00)
1049m [2021-10-14 13:35:41.390] GPU2 3060Ti 425.68 kH/W 65.13 MH/s 65.13 MH/s 268/4/34 (98.53)
1049m [2021-10-14 13:35:41.390] GPU3 3060Ti 353.95 kH/W 65.13 MH/s 65.13 MH/s 286/0/37 (100.00)
1049m [2021-10-14 13:35:41.390] GPU4 3060Ti 425.66 kH/W 65.13 MH/s 65.13 MH/s 311/0/46 (100.00)
1049m [2021-10-14 13:35:41.390] GPU5 3060Ti 425.58 kH/W 65.11 MH/s 65.12 MH/s 287/0/42 (100.00)
1049m [2021-10-14 13:35:41.390] 2406.58 kH/W 390.73 MH/s 390.74 MH/s 1721/4/227 (99.77)
Is it bad or good that 10% of the submitted shares are stales for miningpoolhub?
October 14, 2021, 12:54:35 PM
Any plan to add LHR unlock support soon?
Not yet. Nvidia will probobly improve the LHR in the next versions. Instead we are optimizing the AMD 6800XT.
If we can get it up to 80MHASH it will be a gamechanger...
Wow,that would be impressive to do and it would be a game changer for me too as I own a couple of them currently limited to 64 Mhsh in Phoenix miner but if you make them to 80 Mhsh without using a Ryzen 9 processor which not everyone can afford that would truly be a game changer.
October 14, 2021, 11:57:21 AM
Any plan to add LHR unlock support soon?
Not yet. Nvidia will probobly improve the LHR in the next versions. Instead we are optimizing the AMD 6800XT.
If we can get it up to 80MHASH it will be a gamechanger...
October 14, 2021, 11:53:10 AM
We have created an api v1.1 where you can extract both zil and eth mining stats.
October 14, 2021, 11:24:35 AM
try v1.14..
need linux version October 14, 2021, 07:55:24 AM
when linux version 1.14 will be released?
Jump to: