Topic: Team Black Miner (ETHW ETC Vertcoin Ravencoin Zilliqa +dual +tripple mining ) - page 92. (Read 35100 times)
October 14, 2021, 07:27:31 AM
so i got myself a 3080ti today. any plan to add LHR unlock support soon? for now i have to cut short my testing and go back to gminer, which nets aroun 84mh/s on the rog strix 3080ti.
October 13, 2021, 08:25:12 PM
27m [2021-10-14 03:07:19.371] mining.submit: Pool reponded with error
27m [2021-10-14 03:07:19.371] Error(950395421): Share accepted (stale)
Binance at its finest.
Meh,... Will let it run 4 now and see how it goes on, otherwise test tomorrow/later with <1.1x~ and see how that works out. Its just weird that it runs for weeks smooth, and now...
27m [2021-10-14 03:07:19.371] Error(950395421): Share accepted (stale)
Binance at its finest.
Meh,... Will let it run 4 now and see how it goes on, otherwise test tomorrow/later with <1.1x~ and see how that works out. Its just weird that it runs for weeks smooth, and now... 
October 13, 2021, 07:28:29 PM
add
--log (Enable logging)
--log (Enable logging)
October 13, 2021, 07:25:11 PM
Dont have a logfile. 
October 13, 2021, 07:06:19 PM
Ahh!
And btw. noticed got some stale shares on my 1070 recently, any suggestions? Running with; --xintensity 224 --no-cpu
And btw. noticed got some stale shares on my 1070 recently, any suggestions? Running with; --xintensity 224 --no-cpu
Rejected shares. Could be a pool problem? check the logfile what's the pool error message? 4600 is high, reduce to 4400 and increase the core clock to 1950
Could u a bit more specific about that? 
The voltage frequency editor is not available for linux
So moving from linux to windows and Team Black can get you a 10% free boost. Post it on reddit.
lock clocks has been added to the todo list...
[moderator's note: consecutive posts merged]
October 13, 2021, 06:59:16 PM
Ahh!
And btw. noticed got some stale shares on my 1070 recently, any suggestions? Running with; --xintensity 224 --no-cpu
https://imgur.com/M8fXuoX.png
https://i.imgur.com/tZxxIJ7.png
And btw. noticed got some stale shares on my 1070 recently, any suggestions? Running with; --xintensity 224 --no-cpu
https://imgur.com/M8fXuoX.png
https://i.imgur.com/tZxxIJ7.png
October 13, 2021, 06:56:16 PM
The voltage frequency editor is not available for linux
October 13, 2021, 06:51:50 PM
So there is a way to limit the clocks.
Could u a bit more specific about that?
October 13, 2021, 06:41:38 PM
Hey guys,
any tipps to improve this 3080?
Or is there not much air left?
Thanks for postingany tipps to improve this 3080?
Or is there not much air left?
So there is a way to limit the clocks. Nice speed..
October 13, 2021, 06:31:30 PM
Hey guys,
any tipps to improve this 3080?
https://i.imgur.com/0tfYy1A.png
https://i.imgur.com/hR4UT4G.png
Or is there not much air left?
any tipps to improve this 3080?
https://i.imgur.com/0tfYy1A.png
https://i.imgur.com/hR4UT4G.png
Or is there not much air left?
October 13, 2021, 05:23:43 PM
I jumped to a new milestone highest hash rate! Although I think it might be a glitch since the hash rate afterwards was a more normal average (135ish), but for the sake of documenting it:
with lock clock and the proper tuning, I beleve stable 140 is possible...We need to find the sweetspot between clocks and intensity. 1800 core clock instead of 1500 can drop a few mhashes. So faster clocks is not always better.. Nvidia cards clocks trottle at default, and it is hurting the performance... With the older cards you could set them to P0 state and the clockrate would be stable. The newest cards still trottle in p0 state...
October 13, 2021, 10:01:01 AM
I jumped to a new milestone highest hash rate! Although I think it might be a glitch since the hash rate afterwards was a more normal average (135ish), but for the sake of documenting it:
nice. Was this the 1.14 build on default settings?
Yes, default intensity on the miner, clocks as shown, power level at 97%
October 13, 2021, 09:38:19 AM
I jumped to a new milestone highest hash rate! Although I think it might be a glitch since the hash rate afterwards was a more normal average (135ish), but for the sake of documenting it:
nice. Was this the 1.14 build on default settings?
October 13, 2021, 09:32:39 AM
I jumped to a new milestone highest hash rate! Although I think it might be a glitch since the hash rate afterwards was a more normal average (135ish), but for the sake of documenting it:
https://imgur.com/gallery/QgqjPFy
https://imgur.com/gallery/QgqjPFy
October 13, 2021, 09:21:16 AM
only with locked core-lock.
What is the nvidia-smi syntax you use to lock the clock?
October 13, 2021, 08:47:20 AM
Nvidia just released their latest driver (496.13) and they updated the CUDA version to 11.5
Will there be an updated TBM version that supports CUDA version 11.5?
Will there be an updated TBM version that supports CUDA version 11.5?
October 12, 2021, 08:01:41 PM
All my gpus in all rigs are in P0 state for many years, it is something else.
Here in p0 clocks are stable except when temp is to hot, or the card doesn't have enough power.
Anyway v1.14 has been released. check it out. v1.14 has few detected stales on miningpoolhub on --xintensity 1200 (default) and the poolside profit is amazing.
If there is not enough power, then gpu will not clock to 1800 mhz. It is not temperature and not power. As i said, with 1.09 it is working perfectly, but newer versions only with core-lock.
I cant try 1.14 because of 470.05.
October 12, 2021, 04:53:43 PM
Try to download again
The newly uploaded TBM v1.14 resolved the issue as now I am seeing the default xintensity value of 1200.
Thanks!
October 12, 2021, 04:23:09 PM
Try to download again
October 12, 2021, 04:10:07 PM
For this release, do we still need to specify the xintensity value since by default it is configured to 1200?
No need if you mine on miningpoolhub, 2miners, nanopool and many others.
But
Flexpool, ethermine, nicehash probobly need a lower --xintensity
I am running TBM 1.14 now and excluded the xintensity value in the parameters. However, I am seeing that the miner is auto selecting "224" instead of "1200".
Am I missing something here?
Jump to: