The big VTC Vertcoin settings thread - page 47.

blacklig

sr. member

Activity: 504

Merit: 251

Quote from: b0ss on January 25, 2014, 06:47:51 AM

Does RAM really influence the hash rates?
Now I think about it my HD7950 in a 12GB system does get better rates on the Vertcoin algo, while on Scrypt this card is the weakest I have.

How much are you getting from 7950 on 12 GB RAM sys? interesting..

flyare

newbie

Activity: 32

Merit: 0

Quote from: gonzzo on January 25, 2014, 02:15:08 AM

Quote from: flyare on January 24, 2014, 11:50:54 PM

Quote

which miner and os do u use ?

at the moment i have 4 x 355 kh/s, moded cgminer 3.7.2
config:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer --scrypt -o server -u user -p pw -v 1 -I 13 -w 256 -g 2 --lookup-gap 2 --gpu-powertune -20 --gpu-engine 1000 --gpu-memclock 1500 --thread-concurrency 8193 --no-submit-stale

while experimenting yesterday on a other worker with 3 x 280x i had some problems with devices going off, after a reboot the problem was solved (same config) not sure what it was

Thanks for reply!
I am using Vertminer 0.5.2, everything okie.
My result:
4x311Khz/s Temp about 68'c

"intensity" : "13",
"thread-concurrency" : "8193",
"gpu-engine" : "1100",
"gpu-memclock" : "1500",
"gpu-threads" : "1"

I want to up to 350Khz/s. Can you help me!
Thanks!

yea i also switched to vertminer 0.5.2 (still at 350kh/s)
the only idea for you is to set gpu-engine lower try 1000 and 1020 and try without the gpu-threads setting

and don't forget the setx commands

good luck!

Can u show me your config?
My card Asus R9 270 non X DirectCU II Top OC
Thanks!

b0ss

newbie

Activity: 53

Merit: 0

Does RAM really influence the hash rates?
Now I think about it my HD7950 in a 12GB system does get better rates on the Vertcoin algo, while on Scrypt this card is the weakest I have.

Freekiiee

member

Activity: 96

Merit: 10

Maybe helpfull for others that don't have 4GB or more memory installed on their mobo's..

3x R9 290x (Sapphire).

-I 13 -v 1 -w 256 -g 2 lookup-gap 2 tcc 10222 clock/memory 1050/1500

Gives:
1 - 282KH/s | WU: 262
2 - 291KH/s | WU: 281
3 - 272KH/s | WU: 261

VincentDS

newbie

Activity: 30

Merit: 0

On my Sapphire DUAL-X R9 280X's I get ~360Kh/s per card with these settings:

-I 13 -w 256 -g 2 --lookup-gap 2 --gpu-powertune -20 --gpu-engine 1000 --gpu-memclock 1500

Keep up the mining!

Freekje

full member

Activity: 154

Merit: 100

280x vapor-x's

BAMT 1.3, miner build from src

tc8192 i13 g2 lg2 w256 1000/1500
~345kh/s a card

power consumption 25% lower then on scrypt !

asus 7970 matrix plat

BAMT 1.3, miner build from src
tc8192 i13 g2 lg2 w256 1070/1500

380kh/s

MSI 270 G2G

Windows miner
tc12992 i19 g1 lg2 w256 1100/1500

220kh/s

gonzzo

full member

Activity: 140

Merit: 100

Quote from: fantaza on January 24, 2014, 07:59:15 PM

Quote from: gonzzo on January 24, 2014, 10:06:05 AM

are u using cgwatcher?
had the same problem while using cg, problem was solved after throwing away cg and using standalone .cmd scripts
and don't forget the setx commands!

I am using cgminer. Any experience on this.

try vertminer?

gonzzo

full member

Activity: 140

Merit: 100

Quote from: flyare on January 24, 2014, 11:50:54 PM

Quote

which miner and os do u use ?

at the moment i have 4 x 355 kh/s, moded cgminer 3.7.2
config:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer --scrypt -o server -u user -p pw -v 1 -I 13 -w 256 -g 2 --lookup-gap 2 --gpu-powertune -20 --gpu-engine 1000 --gpu-memclock 1500 --thread-concurrency 8193 --no-submit-stale

while experimenting yesterday on a other worker with 3 x 280x i had some problems with devices going off, after a reboot the problem was solved (same config) not sure what it was

Thanks for reply!
I am using Vertminer 0.5.2, everything okie.
My result:
4x311Khz/s Temp about 68'c

"intensity" : "13",
"thread-concurrency" : "8193",
"gpu-engine" : "1100",
"gpu-memclock" : "1500",
"gpu-threads" : "1"

I want to up to 350Khz/s. Can you help me!
Thanks!

yea i also switched to vertminer 0.5.2 (still at 350kh/s)
the only idea for you is to set gpu-engine lower try 1000 and 1020 and try without the gpu-threads setting

and don't forget the setx commands

good luck!

depnox

newbie

Activity: 17

Merit: 0

Not sure if this is the correct place to put this or if any of you are interested, but I was able to get GUIMiner working with the Scrypt-Adaptive-N algorithm for anyone who is interested. You can download it from here http://www.thesuicidekings.info/GUIMiner-ScryptAdaptiveN.zip. I used an older version of GUIMiner Scrypt and added Aleks_NR3's CGMiner to it. Simple yet effective for those of you who like the GUI interface. It has many good preloaded settings for 5xxx - 7xxx series cards.

Hope this helps some guys out!
Cheers.

PS: I understand I haven't posted on BTCTalk much at all, so feel free to run a virus-scan. You won't find anything but a helpful tool for a great new coin

flyare

newbie

Activity: 32

Merit: 0

Quote

which miner and os do u use ?

at the moment i have 4 x 355 kh/s, moded cgminer 3.7.2
config:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer --scrypt -o server -u user -p pw -v 1 -I 13 -w 256 -g 2 --lookup-gap 2 --gpu-powertune -20 --gpu-engine 1000 --gpu-memclock 1500 --thread-concurrency 8193 --no-submit-stale

while experimenting yesterday on a other worker with 3 x 280x i had some problems with devices going off, after a reboot the problem was solved (same config) not sure what it was

Thanks for reply!
I am using Vertminer 0.5.2, everything okie.
My result:
4x311Khz/s Temp about 68'c

"intensity" : "13",
"thread-concurrency" : "8193",
"gpu-engine" : "1100",
"gpu-memclock" : "1500",
"gpu-threads" : "1"

I want to up to 350Khz/s. Can you help me!
Thanks!

uartasic

full member

Activity: 177

Merit: 101

i tried mining this using Aleks cpu miner but kept on getting booooo!!!!

not sure if its my query time suffering or what but i gave up.

maybe a simple solution?

minecrew

full member

Activity: 224

Merit: 100

MineCrew

Quote

Mining Vertcoin I'm getting just around 75KHS w/ vertminer v0.5.2 and with Vertcoin-CGMinerAleksNR3 I get a blazing 10KHS.

Try to adjust intensity and thread-concurrency, set it lower. You should have about 100 MH/s maximum at your card.

amachiavellian

newbie

Activity: 15

Merit: 0

edit: got it. i just took the short bus ...

fantaza

newbie

Activity: 5

Merit: 0

Quote from: gonzzo on January 24, 2014, 10:06:05 AM

are u using cgwatcher?
had the same problem while using cg, problem was solved after throwing away cg and using standalone .cmd scripts
and don't forget the setx commands!

I am using cgminer. Any experience on this.

mik_druid

full member

Activity: 159

Merit: 100

Quote from: Wipeout2097 on January 22, 2014, 09:50:23 PM

Quote from: mik_druid on January 22, 2014, 08:05:58 AM

For r9 270 Any ideas? I got only 170 KH

-I 20 -g 1 --gpu-memclock 1500 --gpu-engine 1100 --thread-concurrency 14208

gives me ~215 Kh/s

hehe 0000KH with my card

b0ss

newbie

Activity: 53

Merit: 0

I'm getting 600+KH/s with 1xHD7950 from PowerColor and 2 HD5850 DCU2 cards from Asus.
They're getting this hot because they're sandiwched, I don't have risers atm.

Here is my BAT:

Quote

cgminer.exe --scrypt -o pooladdress.com:port -u username --gpu-map 0:1,1:0,2:2 -p password --gpu-engine 820,1100,820 --gpu-memclock 1150,1500,1150 -g 2 --thread-concurrency 5120,19712,5120 -I 15,18,18 -w 256 --gpu-powertune 10 --gpu-fan 50-90,90-100,50-90

The HD7950 card does run at 1.250v (others are stock) because somehow it's hardlocked by PowerColor, so it gets way too hot and burns a lot of power...

EDIT: Just noticed the HD7950 goes sick after some time, running it at -I 18 solves the problem, still gets over 600KH/s avg in total.
I edited the above BAT config to avoid confusion but the screenshot still shows 20.

SlyFecker

newbie

Activity: 4

Merit: 0

Quote from: mik_druid on January 24, 2014, 06:20:54 PM

Quote from: SlyFecker on January 24, 2014, 06:07:36 PM

1 x Saphire Toxic 280x with CGMiner running @ 410K

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer.exe --scrypt -o stratum+tcp://s.eu.vertcoin.org:3333 -u xxxx -p xxxxx -g 2 -w 256 -I 13 --thread-concurrency=8250 --gpu-engine=1160 --gpu-memclock=1860 --auto-fan --gpu-powertune 20

Ok I managed somehow to achieve decent speed 180KH on my 270

-I 12 -w 256 -g 2 -v 1 --thread-concurrency 4648 --lookup-gap 2 --gpu-engine 1050 --gpu-memclock 1500

I had to change thread concurrency to around 4000 , thanks for help Cheesy

Is there any way to make it work faster?

Your on the 270 so - up your thread-concurrency to 8192 (-/+20). Save a copy of your .bat file and play with the numbers, gradually upping them until you get the best out of your card. Down -12 to 11 (until you get higher speeds then change +1 each try)

Good Luck x

mik_druid

full member

Activity: 159

Merit: 100

Quote from: SlyFecker on January 24, 2014, 06:07:36 PM

1 x Saphire Toxic 280x with CGMiner running @ 410K

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer.exe --scrypt -o stratum+tcp://s.eu.vertcoin.org:3333 -u xxxx -p xxxxx -g 2 -w 256 -I 13 --thread-concurrency=8250 --gpu-engine=1160 --gpu-memclock=1860 --auto-fan --gpu-powertune 20

Ok I managed somehow to achieve decent speed 180KH on my 270

-I 12 -w 256 -g 2 -v 1 --thread-concurrency 4648 --lookup-gap 2 --gpu-engine 1050 --gpu-memclock 1500

I had to change thread concurrency to around 4000 , thanks for help Cheesy

Is there any way to make it work faster?

SlyFecker

newbie

Activity: 4

Merit: 0

1 x Saphire Toxic 280x with CGMiner running @ 410K

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cgminer.exe --scrypt -o stratum+tcp://s.eu.vertcoin.org:3333 -u xxxx -p xxxxx -g 2 -w 256 -I 13 --thread-concurrency=8250 --gpu-engine=1160 --gpu-memclock=1860 --auto-fan --gpu-powertune 20

mik_druid

full member

Activity: 159

Merit: 100

Quote from: madjihad on January 24, 2014, 03:03:45 PM

Quote from: mik_druid on January 24, 2014, 01:11:51 PM

windows , I'll check your settings [ unfortunatelly they dont's work Sad

]

Try
-I 12 -w 256 -g 2 -v 1 --thread-concurrency 8000 --lookup-gap 2 --gpu-engine YOUR_CARD_DEFAULT_CORE_CLOCK --gpu-memclock YOUR_CARD_DEFAULT_MEMCLOCK_CLOCK
Or just
-I 12 -w 256 -g 2 -v 1 --thread-concurrency 8000 --lookup-gap 2 --gpu-engine 800 --gpu-memclock 1000

Works on Windows 7 x64 for me (Driver 13.9)

Quote from: mik_druid on January 24, 2014, 01:11:51 PM

I've got WU 40.1/m ( what is WU? Sorry I'm new in this stuff)

WU - that's the Work Utility, defined as the number of diff1 shares work / minute (accepted or rejected).
Sow very roughly it's you hashrate after exclution of HW. But including any other rejections.

Quote from: mik_druid on January 24, 2014, 01:11:51 PM

Grr I'd rather mine doge instead Sad

Nooooo.... Don't give up with Vertcoin, I've played with config a week, from diff 0.6 Grin

And if you decide to go for DOGE, better go for Skeincoin than

I set mine r9 270: " -I 12 -w 256 -g 2 -v 1 --thread-concurrency 8000 --lookup-gap 2 --gpu-engine 975 --gpu-memclock 1400" only 14KH but UW equals the speed , what am I doing wrong?

Topic: The big VTC Vertcoin settings thread - page 47. (Read 264260 times)