I have one chilli for sell
Do you have it in hand? Where are you shipping from?EDIT: Picture too would be helpful.
Topic: The Chili – 30+GH/s BFL based Bitcoin Miner Assembly - page 38. (Read 137904 times)
EDIT: Picture too would be helpful.
I have one chilli for sell
When will I be able to run the Chilis in EasyMiner on an Android device? Or can they run in that already? I thought maybe a firmware upgrade would be needed due to what happened with first run Chilis (needing custom BFGMiner).
I am new to The Chili and I have tried BFGMINER and CGMINER in Windows and it still cant find the device. What drivers do I need to get it recognized?
What should the command line look like to run it on a pool?
Thx in advance
What should the command line look like to run it on a pool?
Thx in advance
I think BFG works fine in windows with the FTDI driver. Did you wait for the LEDs to go out before starting BFG/CG?
I am new to The Chili and I have tried BFGMINER and CGMINER in Windows and it still cant find the device. What drivers do I need to get it recognized?
What should the command line look like to run it on a pool?
Thx in advance
What should the command line look like to run it on a pool?
Thx in advance
What is your average daily BTC earning for a single Chili right now?
7*24H=100G/0.09-0.08btc you can do mathSo about .03BTC/unit/day. Thanks!
After tooling around with cooling a few days I have my 2 miners putting out approximately 72 GH/S combined. That is netting .066 BTC/day on BTCGUild. My goal is .2 BTC/day... so I need another 160 GH/S or so... I have 65 GH/S on the way... so I need 100GH/S.
Do you guys have a suggestion of good hardware for this? Chilis are gone... so time to look for something else.
Would you be interested in more Chilis? I have 8 in hand with coolers already mounted, that I'm willing to sell for 1.1 BTC each.
Blades are down to .36 BTC I think. Get 10.
Or wait for the cube in next week or so. 3 BTC will get 3 cubes. You'll get 114 GH/s
Or wait for the cube in next week or so. 3 BTC will get 3 cubes. You'll get 114 GH/s
What is your average daily BTC earning for a single Chili right now?
7*24H=100G/0.09-0.08btc you can do mathSo about .03BTC/unit/day. Thanks!
After tooling around with cooling a few days I have my 2 miners putting out approximately 72 GH/S combined. That is netting .066 BTC/day on BTCGUild. My goal is .2 BTC/day... so I need another 160 GH/S or so... I have 65 GH/S on the way... so I need 100GH/S.
Do you guys have a suggestion of good hardware for this? Chilis are gone... so time to look for something else.
Hi there !
Mounting a Chili inside a KnCminer case :
http://forum.kncminer.com/forum/main-category/hardware/18244-hack-knc-bfl-bastard-miner
(and using the KnCminer control circuit to also control the Chili)
uski
Mounting a Chili inside a KnCminer case :
http://forum.kncminer.com/forum/main-category/hardware/18244-hack-knc-bfl-bastard-miner
(and using the KnCminer control circuit to also control the Chili)
uski
EDIT 2: fixed!!! it was a power supply issue. the one failing and the other 2 that failed were all top performers and were causing the power to exceed the power supply's limits. i swapped some units around to get better power balance and now i am hitting 440gh/s on the group of 13.
What was the exact changes you did? Photo?
Cheers...
Can anyone here sent details from the board holes
Because I want to install one custom cooler
And I need dimension of the holes at chilli board
Because I want to install one custom cooler
And I need dimension of the holes at chilli board
+1
I wish every ASIC board manufacturer would publish this information (it would make my job a lot easier).
EDIT 2: fixed!!! it was a power supply issue. the one failing and the other 2 that failed were all top performers and were causing the power to exceed the power supply's limits. i swapped some units around to get better power balance and now i am hitting 440gh/s on the group of 13.
What was the exact changes you did? Photo?
Cheers...
what percent of HW you are getting? I have 20units around 5%-10%
1 unit at 15%. and I have one unit wont boot? 1-4led is constantly on.
1 unit at 15%. and I have one unit wont boot? 1-4led is constantly on.
i have 13 units and they are all below 10% around half are below 5% hw errors
thanks a lot mr teal
Is this still for sale? I read throught the first couple pages but got blinded by the wall of text.
If so I don't have any chips to supply. I waiting on my jalapeno's to ship right now.
Let me know either here or a PM.
If so I don't have any chips to supply. I waiting on my jalapeno's to ship right now.
Let me know either here or a PM.
Here are the units running under the new version of CGminer as a comparison.
Oh, that makes sense. I didn't notice that it was an old version of cgminer that wasn't reporting diff1 shares. Yes, that appears normal. It's not the same as the one oddball unit. Can anyone here sent details from the board holes
Because I want to install one custom cooler
And I need dimension of the holes at chilli board
Because I want to install one custom cooler
And I need dimension of the holes at chilli board
Here are the units running under the new version of CGminer as a comparison.
Does this look wrong to you guys?
Did it just start doing that, or has it always had that kind of HW error rate?Looking at it, the WU rate seems to be normal, so it's hashing and submitting shares at a normal rate. It's just returning twice as many shares to cgminer as it should be, with half of them being invalid. I've heard of one other unit with this behavior, but I've never seen it on any unit I've had. If I had to speculate, I would say one of the engines on an ASIC might constantly be sending errors.
Can anyone here sent details from the board holes
Because I want to install one custom cooler
And I need dimension of the holes at chilli board
Because I want to install one custom cooler
And I need dimension of the holes at chilli board
Jump to: