The Habanero - 650GH/s - OOS - page 33.

CanaryInTheMine

donator

Activity: 2352

Merit: 1060

between a rock and a block!

Quote from: MrTeal on June 05, 2014, 05:23:11 PM

Just got this forwarded on to me from someone who received it in a PM.

Quote from: MrTeal ` on June 03, 2014, 09:01:38 AM

Hi,

The miners are shipping from the US but if you prefer I can process your order directly and mark the package as a low value for duty purposes. I could mark the value as $150 Wink

Current price per unit is 1.28 btc inc express shipping.

If you want to place the order the payment address is -

~~1LUTUHDD1HXSqg8VQQzxYv8CXKyQkXXXXXX~~

After payment pm me the transaction I.D and your shipping address.

Thanks,

MrTeal.

That's not me, obviously. Don't send that guy money.

added scammer tag to this profile: https://bitcointalksearch.org/user/mrteal-339145

ZiG

sr. member

Activity: 406

Merit: 250

Quote from: MrTeal on June 05, 2014, 05:23:11 PM

Just got this forwarded on to me from someone who received it in a PM.

Quote from: MrTeal ` on June 03, 2014, 09:01:38 AM

Hi,

The miners are shipping from the US but if you prefer I can process your order directly and mark the package as a low value for duty purposes. I could mark the value as $150 Wink

Current price per unit is 1.28 btc inc express shipping.

If you want to place the order the payment address is -

~~1LUTUHDD1HXSqg8VQQzxYv8CXKyQkXXXXXX~~

After payment pm me the transaction I.D and your shipping address.

Thanks,

MrTeal.

That's not me, obviously. Don't send that guy money.

Good catch, MrTeal...

Scammers are all over the place...be carefull... Grin

MrTeal

legendary

Activity: 1274

Merit: 1004

Just got this forwarded on to me from someone who received it in a PM.

Quote from: MrTeal ` on June 03, 2014, 09:01:38 AM

Hi,

The miners are shipping from the US but if you prefer I can process your order directly and mark the package as a low value for duty purposes. I could mark the value as $150 Wink

Current price per unit is 1.28 btc inc express shipping.

If you want to place the order the payment address is -

~~1LUTUHDD1HXSqg8VQQzxYv8CXKyQkXXXXXX~~

After payment pm me the transaction I.D and your shipping address.

Thanks,

MrTeal.

That's not me, obviously. Don't send that guy money.

Majixagi

member

Activity: 98

Merit: 10

Quote from: daddyfatsax on June 05, 2014, 03:22:25 PM

Quote from: Majixagi on June 05, 2014, 03:17:57 PM

How much will the hashfast bankruptcy affect this project, or is that still unknown at this point?

Hashfast can sell all the chips they want in order to pay their debts. They are not making full rigs anymore.

http://arstechnica.com/tech-policy/2014/05/bitcoin-miner-startup-hashfast-strikes-deal-with-creditors-for-now/

Good news then. Thanks!

daddyfatsax

hero member

Activity: 857

Merit: 1000

Anger is a gift.

Quote from: Majixagi on June 05, 2014, 03:17:57 PM

How much will the hashfast bankruptcy affect this project, or is that still unknown at this point?

Hashfast can sell all the chips they want in order to pay their debts. They are not making full rigs anymore.

http://arstechnica.com/tech-policy/2014/05/bitcoin-miner-startup-hashfast-strikes-deal-with-creditors-for-now/

Majixagi

member

Activity: 98

Merit: 10

How much will the hashfast bankruptcy affect this project, or is that still unknown at this point?

GenTarkin

legendary

Activity: 2450

Merit: 1002

Quote from: gateway on June 05, 2014, 02:19:27 PM

Quote from: daddyfatsax on June 05, 2014, 01:09:09 PM

How much longer is batch 2 going to be open?

Well when we sell out, its hard to tell but these are going quite fast at this price point. fyi..

How many are there total for B2?

gateway

hero member

Activity: 552

Merit: 500

Quote from: daddyfatsax on June 05, 2014, 01:09:09 PM

How much longer is batch 2 going to be open?

Well when we sell out, its hard to tell but these are going quite fast at this price point. fyi..

ZBC3

sr. member

Activity: 361

Merit: 250

Do we get a free magic 8 ball with batch 2?

Ha, thanks.

daddyfatsax

hero member

Activity: 857

Merit: 1000

Anger is a gift.

How much longer is batch 2 going to be open?

gateway

hero member

Activity: 552

Merit: 500

Quote from: ZBC3 on June 05, 2014, 12:34:44 PM

Thanks gateway

Is there going to be a 3rd batch or is batch 2 it?

not sure, let me shake the magic 8 ball..... hmm "Cannot predict now"

So if your waiting you might want to order in batch 2.

btchedge

member

Activity: 92

Merit: 10

Quote from: gateway on June 05, 2014, 10:27:51 AM

Quote from: btchedge on June 05, 2014, 01:44:37 AM

Damn, that is quite interesting. It looks like you can definitely run Ubuntu, and it looks like Rikomagic has something similar specifically for linux. I will continue researching and then grab a couple of the most promising for testing. Let me know of any others and I will report results for anyone else interested.
http://www.rikomagic.com/en/product/showpro_id_52_pid_22.html

I would be curious, btw I cant find the buy button on that site.. Sad

http://www.cloudsto.com/mk802iii-le-mini-linux-pc.html

ZBC3

sr. member

Activity: 361

Merit: 250

Thanks gateway

Is there going to be a 3rd batch or is batch 2 it?

gateway

hero member

Activity: 552

Merit: 500

Quote from: ZBC3 on June 05, 2014, 12:06:04 PM

I'm using minepeon and want to know if adding the following on the settings page would have the same effect as adding it directly to the config file;

#!/bin/bash
sleep 10
/usr/bin/screen -dmS miner /opt/minepeon/bin/cgminer --hfa-fan 100 --hfa-temp-target 0 --hfa-temp-overheat 110 --hfa-fail-drop 0 --hfa-hash-clock 200 --api-port 4028 --api-listen --api-network -c /opt/minepeon/etc/miner.conf

I believe you dont need --api-port 4028, by default the port is set to 4028, its only used if you want to connect to it via a different port on your network.

gateway

hero member

Activity: 552

Merit: 500

Quote from: daddyfatsax on June 05, 2014, 10:56:19 AM

Quote from: Swimmer63 on June 05, 2014, 10:48:53 AM

I finally figured out how to get the rpi to run these with cgminer. But I have my directories confused or something and I can't find the config file to update it the speed. When I save the default file under settings it's saving it somewhere I can't find. So I am running at the default 550 Mhz. If anyone has an image to share I would appreciate it and send you a tip.

Or a free Nano Fury 2 USB miner if you're into that sort of thing. New, not used. I manufacture them.

I am pretty sure with the pi to open the conf file you do sudo nano /root/.cgminer/cgminer.conf. Cannot access my rigs at home right now so I cannot tell your for 100%. Best way is to run cgminer and save the conf file to /home/pi/cgminer.conf.

Please correct me if I am wrong.

Also when your viewing/editing the cgminer.conf remove the line that has like hfa-hash-clock 550 , the command line overrides will not work if this is set.. kinda silly, I asked Con that if you override a command via the command line it should use that instead of whats in the config..

just a tip

ZBC3

sr. member

Activity: 361

Merit: 250

I'm using minepeon and want to know if adding the following on the settings page would have the same effect as adding it directly to the config file;

#!/bin/bash
sleep 10
/usr/bin/screen -dmS miner /opt/minepeon/bin/cgminer --hfa-fan 100 --hfa-temp-target 0 --hfa-temp-overheat 110 --hfa-fail-drop 0 --hfa-hash-clock 200 --api-port 4028 --api-listen --api-network -c /opt/minepeon/etc/miner.conf

daddyfatsax

hero member

Activity: 857

Merit: 1000

Anger is a gift.

Quote from: Swimmer63 on June 05, 2014, 10:58:25 AM

Quote from: daddyfatsax on June 05, 2014, 10:56:19 AM

Quote from: Swimmer63 on June 05, 2014, 10:48:53 AM

I finally figured out how to get the rpi to run these with cgminer. But I have my directories confused or something and I can't find the config file to update it the speed. When I save the default file under settings it's saving it somewhere I can't find. So I am running at the default 550 Mhz. If anyone has an image to share I would appreciate it and send you a tip.

Or a free Nano Fury 2 USB miner if you're into that sort of thing. New, not used. I manufacture them.

I am pretty sure with the pi to open the conf file you do sudo nano /root/.cgminer/cgminer.conf. Cannot access my rigs at home right now so I cannot tell your for 100%. Best way is to run cgminer and save the conf file to /home/pi/cgminer.conf.

Please correct me if I am wrong.

OK - even if my cgminer directory is cgminer-4.3.4

Just do the --config /home/pi/cgminer.conf, if you want to put it in the same directory as cgminer that would work as well.

sidehack

legendary

Activity: 3416

Merit: 1865

Curmudgeonly hardware guy

What kind of pump flow-rate are people looking at with these?

Swimmer63

legendary

Activity: 1593

Merit: 1004

Quote from: daddyfatsax on June 05, 2014, 10:56:19 AM

Quote from: Swimmer63 on June 05, 2014, 10:48:53 AM

I finally figured out how to get the rpi to run these with cgminer. But I have my directories confused or something and I can't find the config file to update it the speed. When I save the default file under settings it's saving it somewhere I can't find. So I am running at the default 550 Mhz. If anyone has an image to share I would appreciate it and send you a tip.

Or a free Nano Fury 2 USB miner if you're into that sort of thing. New, not used. I manufacture them.

I am pretty sure with the pi to open the conf file you do sudo nano /root/.cgminer/cgminer.conf. Cannot access my rigs at home right now so I cannot tell your for 100%. Best way is to run cgminer and save the conf file to /home/pi/cgminer.conf.

Please correct me if I am wrong.

OK - even if my cgminer directory is cgminer-4.3.4

daddyfatsax

hero member

Activity: 857

Merit: 1000

Anger is a gift.

Quote from: Swimmer63 on June 05, 2014, 10:48:53 AM

I finally figured out how to get the rpi to run these with cgminer. But I have my directories confused or something and I can't find the config file to update it the speed. When I save the default file under settings it's saving it somewhere I can't find. So I am running at the default 550 Mhz. If anyone has an image to share I would appreciate it and send you a tip.

Or a free Nano Fury 2 USB miner if you're into that sort of thing. New, not used. I manufacture them.

I am pretty sure with the pi to open the conf file you do sudo nano /root/.cgminer/cgminer.conf. Cannot access my rigs at home right now so I cannot tell your for 100%. Best way is to run cgminer and save the conf file to /home/pi/cgminer.conf.

Please correct me if I am wrong.

Topic: The Habanero - 650GH/s - OOS - page 33. (Read 96051 times)