Topic: The Habanero - 650GH/s - OOS - page 53. (Read 96051 times)

$1500 Habanero
   $95 H80i http://www.amazon.com/Corsair-Series-Extreme-Performance-Liquid/dp/B009ZN03AA
  $170 Rosewill 1kW Gold 83A single 12v+ http://www.amazon.com/Rosewill-CAPSTONE-1000-M-Continuous-Certified-Modular/dp/B00GMDENMA/ref=sr_1_3?s=pc&ie=UTF8&qid=1399087596&sr=1-3

Grand Total = ~700 GH/s for $1765 without controller

Same price as ~6 S1 Antminers
~$1500 = 6 X ~$250 (.55 BTC)
~  $240 = 6 X 500W EVGA PSU http://www.amazon.com/EVGA-80PLUS-Certified-ATX12V-100-W1-0500-KR/dp/B00H33SFJU/ref=sr_1_20?s=pc&ie=UTF8&qid=1399088255&sr=1-20

Grand Total = ~1100 GH/s for $1740 no controller needed

Yes the S1s pull double the power... but for 50%+ the hashrate in this pricing comparison.

They also have already been assembled so are stack-able, do not require CAT5 if you want to use the wireless and are also in stock now.

No offense MrTeal... I just agree that the Habanero missed its comparable price mark...

Looking forward to the renders.   

price is spicy ! without the cost of psu, cooling & shipping.  hope it can be more affordable & competitive.

The Shop is open for those interested in ordering spicy Habanero's! https://peppermining.com/shop/

Nothing specific at this time, but going forward will we be definitely be looking to the future. We'll probably reassess early next month when things settle down, and see what the landscape looks like then.

Mr teal any plans on using chips from a reputable manufacturer like AM or spondoolies? You seem like a nice guy but it's a shame you chose to work with one of the scummiest companies.

Hell even avalon would be a better partner.

That's because you are selectively highlighting hoping to prove some kind of lie. There is none - the chip we use is an 8 phase digital controller. We are using 6 phases in the design, so there are 6 phases on the board. It was highlighting that the chips are the heart of the VRM are completely different to counter your mistaken believe that the board is a clone of the Evo

I deleted your other off topic post just complaining about HashFast as it has nothing to do with Pepper Mining or the Habanero, and will start doing so with your posts going forward. It's pretty obvious that you don't really have any interest in the product or company outside of hoping that we fail because our board uses HashFast chips.

Umm OK.  On this end of the internet your barrage of posts reads differently than it sounds in your head.

I'm not trolling, it's a completely legitimate question. He claims that his board is different than the EVO because of a 8-phase regulator, while the shops lists a 6-phase one. So the shop (or the post) is wrong, i pointed it out so that he could correct it.

About HashCrap... I'm not getting into it if you don't mind, because that would be "trolling" and really derailing the thread.

Why the nonstop trolling?  MrTeal has already established that he can turn lemons into lemonaide with the Chili, and you're trolling while he does it again with the Habenero.

Is it better for these chips to be tied up in court for a year?  If bankruptcy happens, do you think customers will get anything other than cents/$ or flat out burned?

You act as if MrTeal is liable for you being butthurt at hashfast and you're nitpicking every detail you can find to discredit him.

I applaud him for doing something that neither BFL or Hasfast can do - build and deliver a working miner in a reasonable timeframe.

One of the two is wrong

I should have some cool renders for you soon of the new backplate / heatsink assembly that will ship with the boards.
When dissipating the kind of heat that one of these chips can put out getting a lot of pressure on the cooler is very important. Unfortunately it's very hard to get those kind of pressures without warping the board using the stock backplates that ship with a heat sink or closed loop water cooler since they just don't support directly under the ASIC. Even using a piece of flat metal is difficult, as there are ~300 capacitors under the chip to ensure smooth voltage to the dies.

Our solution for the production boards was to shuffle those capacitors around, leaving a cross of flat PCB in the center of the chip. We then milled four pockets in the back plate under each die where the capacitors are, but left the meat of the backplate in that cross that runs through the center of the ASIC, so it bears right against the PCB. Voila, you can tighten down the cooler an insane amount, with no appreciable board flex.

In addition, rather than just make a backplate out of flat metal, we extended the area and made it out of aluminum heatsink. Not only do the fins add some extra rigidity, but the backplate/heatsink combination extends out to cover a big area of the ground and core voltage planes, helping to cool off the power supply components. The backplate is wide enough that it can mounted to the board with four #6-32 screws and a 105mm square hole spacing, which means if you're using a 120mm radiator like the H80i you can mount the radiator on standoffs to the backside of the board, or just install a 120mm fan blowing down on the heatsink to really keep the DC/DC stage cool.

The heatsink is also symmetrical, so if you use a case and your airflow is side to side instead of front to back, you can just rotate it 90 degrees to make sure you get the optimal flow over the heatsink.

...Which means you are doing a great job, ...MrTeal & company...!

Interesting story, I was messing with my Antminer S2 trying to get it to work again (the SD Card just corrupted itself somehow), and after doing so I noticed that my Habanero had stopped hashing. Logged in and I saw that cgminer has crashed, so I reset the board and fired it back up.
The board shuts down again almost immediately, throwing a critical temperature error. Looking over at it, I notice the pump isn't running (must have bumped it while removing the S2 top), so I reseated the connector and fired it back up. Pops up and is running stable at 950MHz again.

So, from running full out at 720GH/s even with a pump failure the critical thermal shutdown safely stopped the hashing and protected the chip and board.

Yes! My Chilis are my favorite miners, and have been mining flawlessly (and near-silent) for 6+ months. I am very excited about the Habanero!
*crosses fingers for a good price*

Mr Teal,

Thanks again for being a kick ass developer! I can't wait to get my hands on the habenero.


 

Ok so what you wanted to say is that you are taking "settlement" chips from your customers directly instead of buying it from HashCrap.

It wasn't clear at all.

It's not that complicated, really. HashFast has been doing chip sales for awhile now. There are people who bought chips from HashFast and are making their own boards based on HashFast's reference design, but some are looking for people to mount those chips onto boards for them. It's also not exactly a secret that HashFast has been trying to convert people who have big orders for boards or systems to taking chips. For those people who choose to do that, they need someone to put chips onto boards or someone to sell chips to.

Thank you, much appreciated.

MrTeal, im sorry to see such a wonderful dev/progress thread derailed by some inconsiderate folk. I can for sure say you have developed and are bringing to production an excellent product, as you have in the past with the sweet sweet chili.